Search

Buildings with indoor swimming pools have a large energy footprint. The source of major energy loss is the swimming pool hall where air humidity is increased by evaporation from the pool water surface. This increases energy consumption for heating and ventilation of the pool hall, fresh water supply loss and heat demand for pool water heating. In this paper, a mathematical model of the swimming pool was made to assess energy demands of an indoor swimming pool building. The mathematical model of the swimming pool is used with the created multi-zone building model in TRNSYS software to determine pool hall energy demand and pool losses. Energy loss for pool water and pool hall heating and ventilation are analyzed for different target pool water and air temperatures. The simulation showed that pool water heating accounts for around 22%, whereas heating and ventilation of the pool hall for around 60% of the total pool hall heat demand. With a change of preset controller air and water temperatures in simulations, evaporation loss was in the range 46-54% of the total pool losses. A solar thermal sanitary hot water system was modelled and simulated to analyze it's potential for energy savings of the presented demand side model. The simulation showed that up to 87% of water heating demands could be met by the solar thermal system, while avoiding stagnation. [ABSTRACT FROM AUTHOR]

This paper presents a new approach in mathematical modeling of thermodynamic cycles and electric power of utility district-heating and co-generation steam turbines. The approach is based on the application of the dimensionless mass flows, which describe the thermodynamic cycle of a combined heat and power steam turbine. The mass flows are calculated relative to the mass flow to low pressure turbine. The procedure introduces the extraction mass flow load parameter ?h which clearly indicates the energy transformation process, as well as the co-generation turbine design features, but also its fitness for the electrical energy system requirements. The presented approach allows fast computations, as well as direct calculation of the selected energy efficiency indicators. The approach is exemplified with the calculation results of the district heat power to electric power ratio, as well as the cycle efficiency, vs. ?h. The influence of ?h on the conformity of a combined heat and power turbine to the grid requirements is also analyzed and discussed. [ABSTRACT FROM AUTHOR]