Search

The formation of ordered magnetic domains in thin films is important for the magnetic microdevices in spin-electronics, magneto-optics, and magnetic microelectromechanical systems. Although inducing anisotropic stress in magnetostrictive materials can achieve the domain assembly, controlling magnetic anisotropy over microscale areas is challenging. In this work, we realized the microscopic patterning of magnetic domains by engineering stress distribution. Deposition of ferromagnetic thin films on nanotrenched polymeric layers induced tensile stress at the interfaces, giving rise to the directional magnetoelastic coupling to form ordered domains spontaneously. By changing the periodicity and shape of nanotrenches, we spatially tuned the geometric configuration of domains by design. Theoretical analysis and micromagnetic characterization confirmed that the local stress distribution by the topographic confinement dominates the forming mechanism of the directed magnetization.

The silicon surface texture significantly affects the current density and efficiency of perovskite/silicon tandem solar cells. However, only a few studies have explored fabricating perovskite on textured silicon and the effect of texture on perovskite films because of the limitations of solution processes. Here we produce conformal perovskite on textured silicon with a dry two-step conversion process that incorporates lead oxide sputtering and direct contact with methyl ammonium iodide. To separately analyze the influence of each texture structure on perovskite films, patterned texture, high-resolution photoluminescence (μ-PL), and light beam-induced current (μ-LBIC), 3D mapping is used. This work elucidates conformal perovskite on textured surfaces and shows the effects of textured silicon on the perovskite layers with high-resolution 3D mapping. This approach can potentially be applied to any type of layer on any type of substrate. The efficiency of perovskite/silicon tandem solar cells is affected by silicon surface texture, however fabrication processes in solution limit surface studies. Here a perovskite layer on textured silicon is formed through a dry two-step conversion process with lead oxide sputtering and direct contact with methyl ammonium iodide.

The angle-variable tunable optical filter was strictly fabricated by two strategies of nanoimprint-coupled metal nanopatterning with improved cost-effectiveness and accessibility. The tunable optical properties and the performances of two strategies were experimentally examined and turned out to be well matched to numerical results. Tunable properties are obtained by three factors: size of fabricated Ag nanodisks, incident illumination angle, and fabrication strategies. The resonant extinction peak shifts were identified to show a large increase along with the increase in fabricated Ag disk size and increase in the incidence angle of illumination. When comparing a fabrication strategy, it was confirmed that the sample fabricated by the strip-off method has better stability on color changes with a consistent dependency on the incident angle. The presented strategies of fabrication are technically viable for obtaining well-defined plasmonic nanostructures so that it has the feasibility to apply for fascinating optical applications including display or tunable optical filters.

Radio frequency (RF) magnetron-sputtered TiO2 (RS-TiO2) is investigated as a hole-blocking layer for perovskite solar cells. RS-TiO2 shows conformal, dense, and efficiently electron transferable pr...

This paper investigates the correlation between the random lasing properties of organic waveguides made by poly-(9-9dioctylfluorene) (PFO) thin films and the morphology of wrinkled corrugated substrates. The capability to individually control the wrinkle wavelength, shape, and height allows us to separately investigate their role on the sample emission properties. We demonstrate that the main parameter determining the presence of coherent random lasing is the substrate roughness and that, contrary to what could be qualitatively expected, as the roughness increases, coherent random lasing is progressively reduced. Coherent random lasing is observed only for a substrate roughness below 33 nm, while higher roughness leads to amplified spontaneous emission (up to 70 nm) or to the absence of light amplification in the film (above 70 nm). We demonstrate that this result is due to a progressive reduction of the light amplification efficiency in the PFO film, evidencing that coherent random lasing can be obtained only with a right interplay between light amplification and scattering. Besides clarifying the basic aspects of random lasing in organic waveguides, our work opens the way to the realization of organic random lasers with predictable emission properties, thanks to the high control level of the scattering properties of the wrinkled corrugated surfaces.

Correction to: Communications Chemistry https://doi.org/10.1038/s42004-020-0283-4, published online 25 March 2020. The original version of this Article incorrectly designated Yoonmook Kang as a corresponding author and listed their e-mail address in error. This has now been corrected in the PDF and HTML versions of the Article.

We demonstrate a fiber delay line-based direct comb-line stabilization with 6X10-15 frequency instability within 1 s. Two combs could be simultaneously stabilized to a single fiber delay-line with ~1-Hz relative linewidth and ~20-Hz absolute linewidth.

We investigated strontium oxide (SrO) as an interlayer material to enhance the UV stability of a CH3NH3PbI3 perovskite solar cell. Moisture and over 400 nm wavelength of light were excluded to investigate the effect of UV light only. Two different interlayer fabrication processes were examined to optimize the performance of this solar cell. Devices fabricated by dipping for 30 min in SrO solution exhibited photoconversion efficiencies of 15.5%, whereas those fabricated with 60-min dipping showed photoconversion efficiencies of 15% and exhibited local Sr agglomeration. Devices with SrO displayed lower initial efficiencies than those without any SrO layer (17.6%), However, a device without SrO retained only 34.4% of its initial efficiency after 100 h of UV exposure. In contrast, SrO-incorporated devices retained almost 60.0% of their initial efficiency. Severe μ-PL mapping intensity degradation was observed in devices that did not include the interlayer, but no degradation was observed in those with the SrO interlayer. This can be attributed to the passivation of the degradation sites by SrO.

One of the most interesting topics in physical science and materials science is the creation of complex wrinkled structures on thin-film surfaces because of their several advantages of high surface area, localized strain, and stress tolerance. In this study, a significant step was taken toward solving limitations imposed by the fabrication of previous artificial wrinkles. A universal method for preparing hierarchical three-dimensional wrinkle structures of thin films on a multiple scale (e.g., nanometers to micrometers) by sequential wrinkling with different skin layers was developed. Notably, this method was not limited to specific materials, and it was applicable to fabricating hierarchical wrinkles on all of the thin-film surfaces tested thus far, including those of metals, two-dimensional and one-dimensional materials, and polymers. The hierarchical wrinkles with multiscale structures were prepared by sequential wrinkling, in which a sacrificial layer was used as the additional skin layer between sequences. For example, a hierarchical MoS2 wrinkle exhibited highly enhanced catalytic behavior because of the superaerophobicity and effective surface area, which are related to topological effects. As the developed method can be adopted to a majority of thin films, it is thought to be a universal method for enhancing the physical properties of various materials.

Nanostructured surfaces with quasi-random geometries can manipulate light over broadband wavelengths and wide ranges of angles. Optimization and realization of stochastic patterns have typically relied on serial, direct-write fabrication methods combined with real-space design. However, this approach is not suitable for customizable features or scalable nanomanufacturing. Moreover, trial-and-error processing cannot guarantee fabrication feasibility because processing-structure relations are not included in conventional designs. Here, we report wrinkle lithography integrated with concurrent design to produce quasi-random nanostructures in amorphous silicon at wafer scales that achieved over 160% light absorption enhancement from 800 to 1,200 nm. The quasi-periodicity of patterns, materials filling ratio, and feature depths could be independently controlled. We statistically represented the quasi-random patterns by Fourier spectral density functions (SDFs) that could bridge the processing-structure and structure-performance relations. Iterative search of the optimal structure via the SDF representation enabled concurrent design of nanostructures and processing.

We characterize wrinkling on the surfaces of prestrained polystyrene sheets coated with thin polytetrafluoroethylene skins using a combination of mechanical strain measurements and 3D finite element simulations. The simulations show that wrinkle wavelength increases with skin thickness, in agreement with a well-known continuum model and recent experiments. The wrinkle amplitudes also increase with strain. Nanoinclusions, such as holes and patterned lines, influence wrinkle patterns over limited distances, and these distances are shown to scale with the wrinkle wavelengths. Good agreement between experimental and simulated influence distances is observed. The inclusions provide strain relief, and they behave as if they are attracting adjacent material when the sheets are under strain. The wrinkles have stiffnesses in much the same way as do polymers (but at different length scales), a property that is quantified for polymers using persistence lengths. We show that the concept of persistence length can be useful in characterizing the wrinkle properties that we have observed. However, the calculated persistence lengths do not vary systematically with thickness and strain, as interactions between neighboring wrinkles produce confinement that is analogous to the kinetic confinement of polymers.

We show that submicron-sized patterns can be imprinted into soft, recombinant-engineered protein hydrogels (here elastin-like proteins, ELP) by transferring wavy patterns from polydimethylsiloxane (PDMS) molds. The high-precision topographical tunability of the relatively stiff PDMS is translated to a bio-responsive, soft material, enabling topographical cell response studies at elastic moduli matching those of tissues. Aligned and unaligned wavy patterns with mold periodicities of 0.24-4.54 μm were imprinted and characterized by coherent anti-Stokes Raman scattering and atomic force microscopy. The pattern was successfully transferred down to 0.37 μm periodicity (width in ELP: 250 ± 50 nm, height: 70 ± 40 nm). The limit was set by inherent protein assemblies (diameter: 124-180 nm) that formed due to lower critical solution temperature behavior of the ELP during molding. The width/height of the ELP ridges depended on the degree of hydration; from complete dehydration to full hydration, ELP ridge width ranged from 79 ± 9% to 150 ± 40% of the mold width. The surface of the ridged ELP featured densely packed protein aggregates that were larger in size than those observed in bulk/flat ELP. Adipose-derived stem cells (ADSCs) oriented along hydrated aligned patterns with periodicities ≥0.60 μm (height ≥170 ± 100 nm), while random orientation was observed for smaller distances/amplitudes, as well as flat and unaligned wavy ELP surfaces. Hence, micro-molding of ELP is a promising approach to create tissue-mimicking, hierarchical architectures composed of tunable micron-sized structures with nano-sized protein aggregates, which opens the way for orthogonal screening of cell responses to topography and cell-adhesion ligands at relevant elastic moduli.

Fabricating perovskite on textured silicon surface is important for maximizing current density and the power conversion efficiency (PCE) of perovskite/silicon tandem solar cells. However, producing conformal perovskite on textured silicon surface is difficult because most of high efficiency perovskite solar cells have been produced by solution based process. Herein, we investigated possibility of producing perovskite solar cells on textured silicon surface by dry two-step conversion process and analyzing them with periodically patterned texture and photoluminescence mapping. Thickness scale difference between perovskite and silicon substrate have induced focusing problems.

International audience; There is an increasing demand for precise molecular spectroscopy, in particular in the mid-infrared fingerprint window that hosts a considerable number of vibrational signatures, whether it be for modeling our atmosphere, interpreting astrophysical spectra or testing fundamental physics. We present a high-resolution mid-infrared spectrometer traceable to primary frequency standards. It combines a widely tunable ultra-narrow Quantum Cascade Laser (QCL), an optical frequency comb and a compact multipass cell. The QCL frequency is stabilized onto a comb controlled with a remote near-infrared ultra-stable laser, transferred through a fiber link. The resulting QCL frequency stability is below 10-15 from 0.1 to 10s and its frequency uncertainty of 4×10-14 is given by the remote frequency standards. Continuous tuning over ~400 MHz is reported. We use the apparatus to perform saturated absorption spectroscopy of methanol in the low-pressure multipass cell and demonstrate a statistical uncertainty at the kHz level on transition center frequencies, confirming its potential for driving the next generation technology required for precise spectroscopic measurements.

A new clock laser system using an optical cavity with $4.8 \times 10^-17$ thermal noise limit has been developed for rapid evaluation of ytterbium lattice clocks. This was realized by using a 30-cm-long ULE cavity, fused-silica mirror substrates, and crystalline mirror coatings. The frequency stability of the beating signal between the new clock laser and the old clock laser was limited by the latter. The linewidth and the frequency stability of the new clock laser will be measured by comparing the frequency between two similar systems.

A telecommunication optical fiber can stabilize the comb-line frequencies of ultrashort pulse lasers to the quadrillionth level., Frequency-stabilized optical frequency combs have created many high-precision applications. Accurate timing, ultralow phase noise, and narrow linewidth are prerequisites for achieving the ultimate performance of comb-based systems. Ultrastable cavity-based comb-noise stabilization methods have enabled sub–10−15-level frequency instability. However, these methods are complex and alignment sensitive, and their use has been mostly confined to advanced metrology laboratories. Here, we have established a simple, compact, alignment-free, and potentially low-cost all-fiber photonics-based stabilization method for generating multiple ultrastable combs. The achieved performance includes 1-femtosecond timing jitter, few times 10−15-level frequency instability, and

This paper describes how delamination-free, hierarchical patterning of graphene can be achieved on prestrained thermoplastic sheets by surface wrinkling. Conformal contact between graphene and the substrate during strain relief was maintained by the presence of a soft skin layer, resulting in the uniform patterning of three-dimensional wrinkles over large areas (>cm2). The graphene wrinkle wavelength was tuned from the microscale to the nanoscale by controlling the thickness of the skin layer with 1 nm accuracy to realize a degree of control not possible by crumpling, which relies on delamination. Hierarchical patterning of the skin layers with varying thicknesses enabled multiscale graphene wrinkles with predetermined orientations to be formed. Significantly, hierarchical graphene wrinkles exhibited tunable mechanical stiffness at the nanoscale without compromising the macroscale electrical conductivity.

Nanoscale wrinkling on the surfaces of polymer-based materials can be precisely controlled by depositing thin metal films of varying thicknesses. The deposition of these films fundamentally alters the mechanical properties of the substrates in ways that are not simply described using traditional continuum mechanical frameworks. In particular, we find, by modeling within a finite element analysis approach, that the very act of depositing a metal film may alter the Young's modulus of the polymer substrate to depths of up to a few hundred nanometers, creating a modified interfacial skin layer. We find that simulated wrinkle patterns reproduce the experimentally observed features only when the modulus of this surface layer varies by more than ∼500 nm and is described using a sigmoidal gradient multiplier.

An experimental method is developed for the robust frequency stabilization using a high-finesse cavity when the laser exhibits large intermittent frequency jumps. This is accomplished by applying an additional slow feedback signal from Doppler-free fluorescence spectroscopy in an atomic beam with increased frequency locking range. As a result, a stable and narrow-linewidth 556 nm laser maintains the frequency lock status for more than a week, and contributes to more accurate evaluation of the Yb optical lattice clock. In addition, the reference optical cavity is supported at vibration-insensitive points without any vibration isolation table, making the laser setup more simple and compact., Comment: 7 pages, 6 figures

In this study, perovskite thin films (PFs) were conformally deposited on 100 cm2 textured silicon substrates using a two-step vacuum process. The PFs were fabricated by converting thin films of a sputtered-PbO precursor using the chemical vapor deposition process. The conversion of PbO thin films into PFs was confirmed by X-ray diffractometry. The uniformity of reflectance and thickness was higher than 86% and 92%, respectively, on 100 cm2 textured substrate. We appliedmethylammoniumvapor treatment for complete conversion without residual layer and the power conversion efficiency was 10.2% on a glass/FTO/TiO2/MAPbI3/Spiro-MeOTAD/Au structure.

Three-dimensional (3D) hierarchical wrinkles can be generated on prestrained thermoplastic substrates by sequential cycles of skin layer growth followed by the release of prestrain. However, no mechanics models have explained the formation of multigenerational nanostructures using this nanofabrication process. This article describes an analytical model that can represent multiscale wrinkles with arbitrary numbers of generations. Structural features including wrinkle wavelengths and amplitudes on the nanoscale that are predicted by minimizing the total deformation energy of the system. The calculated wavelengths in each generation are in good agreement with experiment. Our mathematical approach provides design principles for achieving multigenerational hierarchical structures.

We are stabilizing the frequency of a mid-infrared quantum cascade lasers (QCLs) to an optical frequency comb itself stabilized to an ultra-stable near-infrared reference signal at $\pmb{1.5\mu} \mathbf{m}$ transferred from SYRTE to LPL using an optical link. The reference stability is copied to the QCL and we benefit from the traceability to the primary standards of SYRTE. The stabilized QCL can be scanned by scanning the near-IR reference with an electro-optic modulator. We use this ultrastable spectrometer to carry out saturated absorption spectroscopy of methanol. A detailed analysis of the frequency measurement uncertainty will be presented.

This paper reports a robust and stretchable nanolaser platform that can preserve its high mode quality by exploiting hybrid quadrupole plasmons as an optical feedback mechanism. Increasing the size of metal nanoparticles in an array can introduce ultrasharp lattice plasmon resonances with out-of-plane charge oscillations that are tolerant to lateral strain. By patterning these nanoparticles onto an elastomeric slab surrounded by liquid gain, we realized reversible, tunable nanolasing with high strain sensitivity and no hysteresis. Our semiquantum modeling demonstrates that lasing build-up occurs at the hybrid quadrupole electromagnetic hot spots, which provides a route toward mechanical modulation of light-matter interactions on the nanoscale.

This paper describes how a memory-based, sequential wrinkling process can transform flat polystyrene sheets into multiscale, three-dimensional hierarchical textures. Multiple cycles of plasma-mediated skin growth followed by directional strain relief of the substrate resulted in hierarchical architectures with characteristic generational (G) features. Independent control over wrinkle wavelength and wrinkle orientation for each G was achieved by tuning plasma treatment time and strain-relief direction for each cycle. Lotus-type superhydrophobicity was demonstrated on three-dimensional G1-G2-G3 hierarchical wrinkles as well as tunable superhydrophilicity on these same substrates after oxygen plasma. This materials system provides a general approach for nanomanufacturing based on bottom-up sequential wrinkling that will benefit a diverse range of applications and especially those that require large area (cm(2)), multiscale, three-dimensional patterns.

We design and develop a new clock laser system for the second Yb optical lattice clock (OLC) at KRISS with the targeted uncertainty of 10−18 level. With a longer ULE cavity, the fused silica substrates, and the crystalline mirror coatings, the overall thermal limit is expected to be 4.3×10−17. The rapid evaluation of the systematic uncertainties of the second OLC will be possible with this new clock laser system.

We present a frequency comb-assisted experimental setup which enables us to both coherently transfer the stability and accuracy of a remote near-infrared (NIR) ultrastable laser to a mid-infrared (MIR) quantum cascade laser (QCL), and widely tune the QCL frequency for spectroscopic applications. The QCL is stabilized at the level of 2×10−15 from 1 to 100 s, with an accuracy of 10−14 after 100 s. The achievable frequency tuning paves the way for high-resolution saturated absorption spectroscopy of molecular transitions, in particular in spectral regions that were previously inaccessible with standard stabilized MIR lasers. Preliminary results show a sensitivity at the kHz level on transition center frequencies.

Quasi-random nanostructured material systems (NMSs) are emerging engineered material systems via cost-effective, scalable bottom-up processes, such as the phase separation of polymer mixtures or the mechanical self-assembly based on thin-film wrinkling. Current development of functional quasi-random NMSs mainly follows a sequential strategy without considering the fabrication conditions in nanostructure optimization, which limits the feasibility of the optimized design for large-scale, parallel nanomanufacturing using bottom-up processes. We propose a novel design methodology for designing quasi-random NMSs that employs spectral density function (SDF) to concurrently optimize the nanostructure and design the corresponding nanomanufacturing conditions of a bottom-up process. Alternative to the well-known correlation functions for characterizing the structural correlation of NMSs, the SDF provides a convenient and informative design representation to bridge the gap between processing-structure and structure-performance relationships, to enable fast explorations of optimal fabricable nanostructures, and to exploit the stochastic nature of manufacturing processes. In this paper, we first introduce the SDF as a non-deterministic design representation for quasi-random NMSs, compared with the two-point correlation function. Efficient reconstruction methods for quasi-random NMSs are developed for handling different morphologies, such as the channel-type and particle-type, in simulation-based design. The SDF based computational design methodology is illustrated by the optimization of quasi-random light-trapping nanostructures in thin-film solar cells for both channel-type and particle-type NMSs. Finally, the concurrent design strategy is employed to optimize the quasi-random light-trapping structure manufactured via scalable wrinkle nanolithography process.

Soft skin layers on elastomeric substrates are demonstrated to support mechano-responsive wrinkle patterns that do not exhibit cracking under applied strain. Soft fluoropolymer skin layers on pre-strained poly(dimethylsiloxane) slabs achieved crack-free surface wrinkling at high strain regimes not possible by using conventional stiff skin layers. A side-by-side comparison between the soft and hard skin layers after multiple cycles of stretching and releasing revealed that the soft skin layer enabled dynamic control over wrinkle topography without cracks or delamination. We systematically characterized the evolution of wrinkle wavelength, amplitude, and orientation as a function of tensile strain to resolve the crack-free structural transformation. We demonstrated that wrinkled surfaces can guide water spreading along wrinkle orientation, and hence switchable, anisotropic wetting was realized.

Plasmonic nanostructures with enhanced localized optical fields as well as narrow linewidths have driven advances in numerous applications. However, the active engineering of ultranarrow resonances across the visible regime-and within a single system-has not yet been demonstrated. This paper describes how aluminum nanoparticle arrays embedded in an elastomeric slab may exhibit high-quality resonances with linewidths as narrow as 3 nm at wavelengths not accessible by conventional plasmonic materials. We exploited stretching to improve and tune simultaneously the optical response of as-fabricated nanoparticle arrays by shifting the diffraction mode relative to single-particle dipolar or quadrupolar resonances. This dynamic modulation of particle-particle spacing enabled either dipolar or quadrupolar lattice modes to be selectively accessed and individually optimized. Programmable plasmon modes offer a robust way to achieve real-time tunable materials for plasmon-enhanced molecular sensing and plasmonic nanolasers and opens new possibilities for integrating with flexible electronics.

We have developed a high performance liquid crystal (LC) alignment layer of ultra-thin single wall carbon nanotubes (SWNTs) and a conjugated block copolymer nanocomposite that is solution-processible for conventional twisted nematic (TN) LC cells. The alignment layer is based on the non-destructive solution dispersion of nanotubes with a poly(styrene-b- paraphenylene) (PS-b-PPP) copolymer and subsequent spin coating, followed by conventional rubbing without a post-annealing process. Topographically grooved nanocomposite films with two dimensionally (2D) networked SWNTs embedded in a block copolymer matrix were created using a rubbing process in which bundles of SWNTs on the composite surface were effectively removed. The LCs were well aligned with a stable pre-tilt angle of approximately 2° on our extremely transparent nanocomposite, which gave rise to superfast switching of the TN LC molecules that was approximately 3.8 ms, or four times faster than that on a commercial polyimide layer. Furthermore, the TN LCD cells containing our SWNT nanocomposite alignment layers exhibited low power operation at an effective switching voltage amplitude of approximately 1.3 V without capacitance hysteresis.

We analyzed frequency-domain characteristics of a femtosecond laser whose carrier-envelope phase (CEP) was stabilized by the direct locking method (DLM). To evaluate the CEP-stabilized laser with zero carrier-envelope-offset frequency (f ceo), as imposed by DLM, a self-referencing f-to-2f interferometer with a shifted frequency comb by an acousto-optic modulator was employed in an out-of-loop. The measurement of the square root of triangle variance confirmed that DLM is a phase-locking method. The tight locking was verified from a narrow bandwidth of f ceo, measured using the out-of-loop interferometer, and from a small frequency jitter measured with a frequency counter referenced to a Rb-clock. The femtosecond laser with CEP stabilized by DLM is, thus, well suited for applications in the frequency domain as well as in the time domain.

This paper presents a novel green laser sequential lateral solidification G-SLS process for AMOLED applications. G-SLS utilizes a high frequency pulsed green laser and 2D mask patterns to manipulate the microstructure of crystallize Si films. Mask patterns have been optimized to obtain uniform microstructure of the crystallized Si films at the overlap region. Thin film transistors based on G-SLS processed Si films have mobility of 150.72 cm2/V-sec and a sub-threshold swing of 0.20V/dec. 14″ qFHD AMOLEDs have been fabricated using the G-SLS process. The advantages and issues of G-SLS technology will be further discussed.

For the first time, photo sensors employing p-type Si and IGZO semiconductor (P-I-OS) have been fabricated with a sensor dimension of W/L = 1600/5. The IGZO layer was deposited using DC sputtering and replaces the conventional n+-doped cathode electrode. The P-I-OS photo sensor is more sensitive to light with shorter wavelengths, and high to low photo-current dynamic range is almost constant from −15V to −2.5V of anode bias. The P-I-OS photo sensor exhibits dynamic range of 53.3 dB under −5V of anode bias and 10,000 lx of illuminated light intensity

Vertical alignment (VA) of a liquid crystal display (LCD) device with a stable pretilt angle has been achieved on ion-bombarded silicon nitride (SiN x) surfaces. The surface energy variation of the SiN x surface with the bonding conversion achieved via ion beam bombardment makes it possible to control the liquid crystal (LC) pretilt angle. X-ray photoelectron spectroscopy revealed that the vertical orientation of the LC molecules occurs on the SiO 2 surface and that this orientation is directionally transformed upon ion bombardment of SiN x thin films. Moreover, the upgraded electro-optical characteristics of VA-LCDs showed potential for high-performance LCD applications on modified SiN x surfaces.

This paper describes polymeric nanostructures with dynamically tunable wetting properties. Centimeter-scale areas of monolithic nanoridges can be generated by strain relief of thermoplastic polyolefin films with fluoropolymer skin layers. Changing the amount of strain results in polyolefin ridges with aspect ratios greater than four with controlled feature densities. Surface chemistry and topography are demonstrated to be able to be tailored by SF6 -plasma etching to access multiple wetting states: Wenzel, Cassie-Baxter, and Cassie-impregnating states. Reversible transitions among the wetting states can be realized in a programmable manner by cyclic stretching and reshrinking the patterned substrates without delamination and cracking.

A fiber-phase-noise compensating system was constructed for a 1.4 GHz reference frequency transferred through a 13-km-long fiber spool. The transfer instability was dependent on the temperature variation of the compensating system. With the room temperature variation stabilized within 0.3℃, the transfer instability was 4.6×10

Sum frequency generation was utilized to obtain a yellow laser with the wavelength of 578.4 nm for a probe laser of an Yb lattice clock. The output of an Nd:YAG laser with wavelength of 1319 nm and that of an Yb-fiber laser with wavelength of 1030 nm were passed through a waveguided periodically-poled lithium niobate (WG-PPLN) for sum frequency generation. It is required that the probe laser has a linewidth of the order of 1 Hz to fully resolve the Yb lattice clock transition. Thus, the linewidth of the probe laser was reduced by stabilizing the frequency to a super-cavity. This was made of ULE with a low thermal expansion coefficient, and was mounted on an active vibration-isolation table at the optimal point for the reduced sensitivity to vibration. Also, this was installed in a vacuum chamber, and the temperature was stabilized to 1 mK level. This system was installed in an acoustic enclosure to block acoustic noise. The finesse of the super-cavity was measured to be 380 000 from the photon life time of the cavity.

The aligned liquid crystals (LCs) display on SiNx thin films using ion-beam (IB) irradiation was studied with controllability of pretilt angle depending on incident energies of the IB. The LCs alignment property for the SiNx thin films were observed to verify the practical application potential. A good LCs alignment of vertical alignment LCs cells on SiNx thin film surfaces irradiated with incident IB energy of 1800eV was achieved. The atomic force microscopy (AFM) images of LCs on SiNx thin film surfaces irradiated with IB energy was used for the surface analysis.

We studied liquid crystal (LCs) alignment effects on homogeneous polyimide (PI) surfaces induced by polarised UV (PUV) exposure and rubbing in different directions. We found that the LC orientation is not affected by PUV exposure times of less than 90 min after rubbing, and that PUV exposure times over 90 min after rubbing resulted in LC orientations that were more closely aligned with the direction of PUV exposure than the direction of rubbing. Short-term PUV exposure affects the variation of the pretilt angle of the PI and LC. In addition, as PUV exposure time increases, it can convert the LC alignment direction from the rubbing direction to the PUV direction.

We investigated the electrical properties of polycrystalline silicon (poly-Si) thin film transistors (TFTs) employing field-enhanced solid phase crystallization (FESPC). An n+ amorphous silicon (n+ a-Si) layer was deposited to improve the contact resistance between the active Si and source/drain (S/D) metal instead of ion doping. By using C–V measurement method, we could explain the diffused phosphorous ions (P+ ions) on the channel surface caused a negatively shifted threshold voltage (VTH) of −7.81 V at a drain bias of 0.1 V, and stretched out a subthreshold swing (S) of 1.698 V/dec. This process was almost compatible with the widely used hydrogenated amorphous silicon (a-Si:H) TFT fabrication process and also offers a better uniformity when compared to the conventional laser-crystallized poly-Si TFT process because of non-laser crystallization.

A new method for fabricating large-area well-aligned ZnMgO nanowire arrays, using radio frequency (RF) magnetron co-sputtering, is reported. ZnO nanowire arrays, prepared by metal organic chemical vapor deposition (MOCVD), were used as seed layers for ZnMgO nanowires. For the fabrication of ZnMgO nanowires, RF powers and sputtering pressure were varied to control the supersaturation condition and the kinetic energies of the sputtered materials. Vertically aligned ZnMgO nanowires with [0 0 0 1] preferred orientation were obtained at a working pressure of 20 × 10−3 Torr, RF power of 50 W and 15 W for ZnO and Mg targets, respectively. Crystallinity of the nanostructures were improved with rapid thermal annealing (RTA) at 900 °C. Furthermore, the blue shift in the near-band-edge emission of RTA-treated ZnMgO nanowires was observed during photoluminescence study.

We fabricate a low noise erbium-doped fiber ring laser that can be continuously tuned over 102 nm by insertion of the fiber Fabry–Perot tunable filter (FFP-TF) in the ring cavity with a novel cavity structure and the optimal gain medium length. As an application of this fiber ring laser, we performed the absorption spectroscopy of acetylene (13C2H2) and hydrogen cyanide (H13C14N) and measure the absorption spectra of more than 50 transition lines of these gases with an excellent signal to noise ratio (SNR). The pressure broadening coefficients of four acetylene transition lines are obtained using this fiber ring laser and an external cavity laser diode.

A new low power consumption amorphous silicon (a-Si:H) TFT level shifter is designed and verified by SPICE simulation. The a-Si:H TFT level shifter employing cascade inverters successfully shifts low voltage (5 V) to high voltage (23 V) by employing a bootstrapping method. Proposed a-Si:H TFT level shifter has considerably reduced the power consumption by 50% compared with the conventional one (8.03 mW) due to connection of clock pulse on the diode connected node and bootstrapping method. The proposed level shifter may be suitable for mobile display applications.

Highly stable voltage programmed a-Si:H TFT pixel circuit for AMOLED, which employs both Vth-compensation and negative bias annealing, is proposed and fabricated. Experimental results, after 60 hours electrical stress at elevated temperature (60°C) show that the OLED current stability in the proposed pixel is considerably improved compared with a conventional 2-TFT pixel, Vth-compensated pixel, and negative bias annealed pixel, respectively. The proposed pixel can reduce the degradation of a-Si:H TFT by employing negative bias annealing store Vth of a-Si:H TFT so that highly stable and uniform a-Si:H TFT backplane for AMOLED. Our proposed pixel may be suitable for highly stable AMOLED employing the a-Si:H TFT.

In order to establish the national frequency standards for the Korea Research Institute of Standards and Science in the 1.5-mum region, we have developed an acetylene-stabilized laser diode locked to the P(16) transition of 13C2H2. We then measured its absolute frequency using an optical-frequency comb based on a mode-locked Ti:sapphire laser whose repetition frequency and carrier-envelope offset frequency were phase locked to an H-maser. The measured absolute frequency of the laser diode locked to the P(16) transition of 13C2H2 was 194 369 569 386.0 kHz, with an uncertainty of 0.3 kHz, based on the measurements of a single system. Including the contribution of the residual offset, the uncertainty was 1.9 kHz

An L-shaped dual-gate device structure, which reduces kink current in polycrystalline silicon thin-film transistors (poly-Si TFTs), has been proposed and fabricated. In the proposed device, the poly-Si TFTs have a lateral grain growth in channels such as TFTs fabricated by sequential lateral solidification (SLS) or CW laser crystallization. The current flow of dual TFTs is strongly affected by grain boundaries showing lateral grain growth. The L-shaped dual gate structure is employed for asymmetry between dual channels. One of the channels is located in a parallel direction of grain growth and the other is located vertically. It is verified by experiment that the proposed L-shaped dual-gate TFT reduced the kink current of poly-Si TFT and showed improved reliability by fixed current flow in the saturation mode.