Search

The dissolution behaviors of various minerals in the tellurium–bismuth ore during oxidic–acidic leaching were investigated systematically in this work. The Te–Bi phase in the ore distributes in network shape, triangular shape, tree shape, strip shape, bulk shape, sparse granule, flake shape, crescent, etc., which are closely intercalated with FeS, FeS2, and CaCO3·(Mg,Fe,Mn)CO3. Under suitable conditions, 95.61% Te and 95.77% Bi can be recovered. Within 20 min of the initial leaching, most of dolomite and Te–Bi phase dissolve rapidly. With the extension of leaching time, a large amount of rod-shape CaSO4 particles form, attach on the surface of the tellurium–bismuth ore particles, and then grow and coarsen. The (Mg,Fe,Al)(Si,Al)Ox(OH)y phase dissolves mainly within 60 min. Fe–S phase can be corroded but cannot dissolve completely. SiO2 cannot dissolve at all. Besides, H2SO4 and Fe3+ play a significant role on the dissolution of various minerals in the ore. Without Fe3+ or H2SO4 in immersion liquid, Te and Bi are difficult to be leached into the lixivium from the tellurium–bismuth ore. As H2SO4 concentration and Fe3+ concentration increase, Te–Bi phase and Fe–Mg–Al–Si–O phase gradually dissolve, the Fe–S phase can be corroded obviously but cannot dissolve, and the Si–O phase has no change. The dissolution of dolomite is mainly controlled by H2SO4. The dissolution behaviors of various minerals in the tellurium–bismuth ore during oxidic–acidic leaching were investigated systematically. Most of dolomite and Te–Bi phase dissolve rapidly. A large amount of rod-shape CaSO4 particles form, attach on the surface of the tellurium–bismuth ore particles, and then grow and coarsen. H2SO4 and Fe3+ play a significant role on the dissolution of various minerals in the ore.

Based on two considerations of making full use of the residual heat of vanadium slag and exploring a novel green vanadium extraction process, this article employs vanadium slag with high MgO content as raw material, blowing oxygen into the molten vanadium slag and using the residual heat of the vanadium slag to carry out high-temperature roasting experiments. XRD and SEM/EDS were used to characterize the phase evolution and morphology of vanadium slag with high MgO content during oxidation. The results show that at a high temperature of 1723 K, the trivalent vanadium in vanadium slag can be partly transformed into acid-soluble pentavalent vanadium. Titanium-bearing spinel was oxidized into a large amount of strip pseudobrookite Fe2TiO5. After oxidation, vanadium existed in the form of the solid solution of magnesium pyrovanadate (Mg, Mn, Ca)2V2O7. The leaching rate of roasted vanadium slag with high MgO content is significantly higher than that of industrial vanadium slag. With the increase of oxygen blowing time from 10 to 30 minutes, the leaching rate of roasted vanadium slag with high MgO content increases from 23.19 to 53.69 pct.

This article investigated the saturated solubility of MgO in converter vanadium slag and its influencing factors. The experimental results of MgO dissolution equilibrium are consistent with the theoretical calculation results. The results show that in MgO saturated vanadium slag, MgO mainly exists in MgV2O4 and MgSiO3. The increase of V2O3 content or the decrease of the FeO/SiO2 ratio is beneficial to increasing the saturated solubility of MgO in the FeO-SiO2-V2O3 slag system. The saturated solubility of MgO in vanadium slag increases from 7.5 to 8.0 wt.% when the temperature increases from 1633 to 1753 K. In addition, the solubility of MgO also increases with the increase of TiO2 and Al2O3 content and decreases with the increase of MnO content.

Aiming at the high-efficiency utilization of vanadium–titanium magnetite with high chromium content, a slag formation path in the converter smelting process of semi-steel containing chromium was pr...

This paper investigated the non-isothermal crystallization kinetics of the spinel crystals in vanadium slags containing high CaO content. Experiments were performed in combination with theoretical calculation to address this issue, and statistical analyses based on the Crystal Size Distribution theory. The results indicate that low cooling rate and high CaO content benefit the growth of spinel crystals. The growth mechanism is revealed to be controlled by interface reactions and diffusion at the cooling rates of 5 K/min and 15 K/min, respectively. However, at higher temperatures (>1673 K), the growth of spinel crystals is controlled by nucleation. While the temperature is decreased to 1523 K at the cooling rate of 5 K/min, the mean diameter of spinel crystals could reach 36.44 μm. Experimental results combining with theoretical reveal that low cooling rate benefits spinels growth, especially for the interval of 1523 K–1200 K.

An effective way to decrease the dephosphorization burden in the current vanadium extraction-steelmaking process is slagging with CaO in vanadium extraction step. The phase composition of vanadium slag with different basicity and the regularities distribution of elements have been investigated by X-ray diffraction analysis and scanning electron microscopy combining with energy disperse X-ray spectrometry, respectively. The results indicate that V mainly concentrates in the spinel phases; Ca and P are rich in the silicate phases. Fe2SiO4 transform to CaFeSiO4, while the basicity of vanadium slag is 1.3. With further increase of basicity, 2CaO·SiO2 could form in the silicate phases. Moreover, the phosphorus-containing phase will transform from Ca3(PO4)2 to Ca3(PO4)2-nCa2SiO4. With the increase of P2O5 content, the crystallization rate of spinels decrease obviously. Furthermore, the peak temperature for crystallization of spinels decrease 5 K with the P2O5 content increasing 1 wt%.

In order to recover the chromium resource in chromium-containing vanadium extraction residue , a promising method is to prepare ferrochromium with the residue. The synthetic residue has been reduced under 1300, 1350 and 1400 °C at the reduction time of 1, 2 and 3 h respectively. The reduced samples have been smelted and separated by an induction furnace. The contents of chromium and iron in metallic phase have been determined by an inductively-coupled plasma spectrometer. The results indicate that chromium iron carbide (Cr, Fe)3C7 is the intermediate phase and titanium oxides have been reduced during the reduction process. While the sample has been reduced under 1400 °C for 3 h, metallic phase becomes the dominate phase and reduction reactions almost complete. Moreover, the chromium content in the metal phase reaches 10.19%.

Applied damage mechanics and coupled finite element method, to study the fatigue crack initiation life problem. Application of coupling finite element method, the damage coupling effect can be modified through the global stiffness matrix to achieve. The step length of the damage evolution is divided by the damage variable of the critical element, and then the damage evolution is analysised. The corresponding stiffness matrix and loading matrix can be obtained continually under the condition of increasing the damage evolution step of the critical element,then the equivalent stress can be calculated. The corresponding fatigue crack initiation life can be calculated by using the damage evolution equation, the progress will not stop until the damage degree of the critical element reaches to one. The fatigue crack initiation life is obtained by adding the fatigue crack initiation lives with different damage variable.

Adding CaO into the vanadium extraction converter is an effective way to decrease the dephosphorization burden in subsequent steelmaking process. The crystallisation process of spinel is one of the most decisive factors in the subsequent extraction. The theoretical calculation results show that the temperature of the peak total crystallization rate will decrease 5K with basicity increasing 0.1. The relation between cooling conditions and grain size of spinels is also discussed. It is found that low cooling rate and high basicity benefit spinel crystal growth. And the non-isothermal crystallization kinetics results indicated that the restriction factors of spinel growth is that solid crystals accept new components from liquid-solid interfacial. While the sample was cooled down to 1250°C(1523K) at cooling rate of 5K/min, the crystal growth is consistent with Ostwald coarsening grew up law, and controlled by diffusion of particle.

Inhomogeneous materials with doubly periodic non-uniform cracks under antiplane shear is dealt with. By using conformal mapping technique and elliptic function theory, the stress field and stress intensity factor at the tip of each crack are derived in closed form. Numerical examples show the influences of some microstructure parameters of crack distribution on stress intensity factor.

Applied fatigue damage mechanics and finite element method to study the fatigue crack initiation life problems of component. Fatigue crack initiation life is obtained by using the method of additional load, just a stiffness matrix calculation, greatly reducing the workload of calculation. With the damage degree of the critical element partitioning step of the damage evolution, the damage degree increases unceasingly obtains the corresponding, corresponding to the stress field, strain field and the load matrix, and then to calculate the equivalent stress, the application of damage evolution equation for calculating fatigue crack forming life corresponding. Until the damage degree of the critical element to 1 so far, the fatigue crack initiation life is obtained by adding the fatigue crack initiation lives with different damage variable.