Search

We report the synthesis method and dimension-dependent magnetic properties of CoFe/Au barcode nanowire arrays. Well-separated multisegment nanowire arrays are synthesized by a pulsed electrodeposition process in a single bath. Samples with four different aspect ratios defined as the CoFe thicknesses to the nanowire diameter are prepared to investigate dimensional effects on the magnetic properties. It is evident except for very low aspect ratio case that each hysteresis loop shows a soft magnetic characteristic with an easy axis parallel to the nanowire axis. Magnetic reversal in most samples is primarily dominated by a transverse domain wall mode.

A Lightly Doped Drain (LDD) structure is known to be very effective in preventing hot electrons in modern NMOS transistors. In this work, the lightly doped region was formed in poly TFT by using a separate LDD mask aligned to a gate mask. The misalignment can be calculated to be about 1.5 microm, and depending on the location of the V(d) application between the source and drain, an LDD or Lightly Doped Source (LDS) structure can be realized on the same TFT. In this way, we can make a perfect comparison between these two structures. It turned out that the LDD is mainly responsible for the low leakage current, and no more than 0.5 microm of the lightly doped region is necessary to lower the leakage current down to less than 5 x 10(-11) amps at V(d) = 10 volts. Typically, the on-current of MILC TFT is more than 10(-4) amps, but 2.5 microm LDS decreases it to below 10(-7) amps.

Nanobarcodes consisting of multicomponents and multisegments have gained attention lately because they can offer multiple functionalities. Here, we report the structure, composition, and magnetic properties of CoFe/Au nanobarcodes fabricated by a pulsed electrodeposition method in one solution bath. The nanobarcodes with three different compositions in magnetic segments including Co68Fe32 (Co-rich), Co50Fe50 (equiatomic), and Co35Fe65 (Fe-rich) exhibit different magnetic characteristics as a result of compositional variation. The highest saturation magnetization value of 1739 emu/cm3 was observed in the Fe-rich case.

NiFe/Au barcode nanowires were synthesized by pulsed electrodeposition using anodic aluminum oxide nanotemplate, comprising magnetic, catalytic, and optical segments, respectively. The self-powered motion of the BNWs due to the catalytic reaction was observed in aqueous H2O2. The approach demonstrates how sophistication in barcode nanoarchitecture can be used to synthesize a wide range of hybrid materials.