Search

Infrared spectroscopy is typically not used to establish the oxidation state of metal-based catalysts. In this work, we show that the baseline of spectra collected in diffuse reflectance mode of a series of Pd/Al2O3 samples of increasing Pd content varies significantly and reversibly under alternate pulses of CO or H2 and O2. Moreover, these baseline changes are proportional to the Pd content in Pd/Al2O3 samples exhibiting comparable Pd particle size. Similar measurements by X-ray absorption spectroscopy on a different 2 wt.% Pd/Al2O3 confirm that the baseline changes reflect the reversible reduction-oxidation of Pd. Hence, we demonstrate that changes in oxidation state of metal-based catalysts can be determined using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and that this behavior is part of the spectral changes that are returned by experiments under operando conditions.

Palladium-based catalysts are exploited on an industrial scale for the selective hydrogenation of hydrocarbons. The formation of palladium carbide and hydride phases under reaction conditions changes the catalytic properties of the material, which points to the importance of operando characterization for determining the relation between the relative fractions of the two phases and the catalyst performance. We present a combined time-resolved characterization by X-ray absorption spectroscopy (in both near-edge and extended regions) and X-ray diffraction of a working palladium-based catalyst during the hydrogenation of ethylene in a wide range of partial pressures of ethylene and hydrogen. Synergistic coupling of multiple techniques allowed us to follow the structural evolution of the palladium lattice as well as the transitions between the metallic, hydride and carbide phases of palladium. The nanometric dimensions of the particles resulted in the considerable contribution of both surface and bulk carbides to the X-ray absorption spectra. During the reaction, palladium carbide is formed, which does not lead to a loss of activity. Unusual contraction of the unit cell parameter of the palladium lattice in the spent catalyst was observed upon increasing hydrogen partial pressure.

This work is focused on the determination of the most likely border morphologies in the H-terminated graphenic domains that constitute activated carbons, focusing on four different carbons and six supported-metal catalysts. Among the available characterization techniques, Inelastic Neutron Scattering spectroscopy provides detailed vibrational spectra containing the fingerprint of the terminal C-H groups of carbon materials. From the experimental spectra, we observed clear differences among carbons having different origin, and a systematic decrease in the integrated area upon metal deposition that linearly scales with the nanoparticles dispersion. Density Functional Theory simulations are fundamental to assign the experimental bands to specific species. Thus, an extended simulation work on both regular and defective aromatic models was carried out, providing the inelastic neutron scattering fingerprint of a large number of different C-H terminations. By fitting the experimental spectra with a linear combination of the simulated spectra, it was possible to quantify the concentration of each terminal C-H geometry in the samples, and to identify the species most affected by the metal nanoparticles deposition. Specific benzene rings exposing a single C-H group appear to have a decisive role in the interaction with the metal nanoparticles and their deposition procedure.

We report the series of Pd K-edge X-ray absorption spectra collected during hydrogenation of ethylene with variable ethylene/hydrogen ratio over carbon supported palladium nanoparticles. The data presented in this article includes normalized X-ray absorption spectra, k2-weighted oscillatory χ(k) functions extracted from the extended X-ray absorption fine structure (EXAFS) and k2-weighted Fourier-transformed EXAFS data, χ(R). Each spectrum is reported together with the hydrogen, ethylene and helium flow rates, adjusted during its collection. In addition, time evolution of the ratio of m/Z signals of 30 and 28 registered by online mass spectrometer is presented. The data analysis is reported in Bugaev et al., Catal. Today, 2019 [1].

Palladium-based catalysts are widely applied for the selective hydrogenation of acetylene in acetylene/ethylene mixtures. Under reaction conditions, palladium hydride or carbide phases can be formed, which change the catalytic properties of material. In the current work, we focus on the process of carbide phase formation in supported palladium nanoparticles (NPs) exposed to acetylene and ethylene at 100 °С. The evolution of carbide phase was monitored in situ by X-ray absorption near edge structure (XANES) spectroscopy, extended X-ray absorption fine structure (EXAFS) spectroscopy and X-ray powder diffraction (XRPD). The degree of the lattice expansion determined by XRPD and EXAFS was extrapolated to obtain the saturated values, which were found to be similar for ethylene- and acetylene-exposed samples, while the rate of carbide formation was higher in the case of acetylene.

Palladium nanoparticles (NPs) find numerous applications as catalysts for hydrogenation of hydrocarbons. Under reaction conditions, formation of palladium hydrides and carbides may occur, which affects the catalytic properties of the catalyst. Unlike pure hydride phase, whose phase diagram is well-studied, conditions of formation of palladium carbides and mixed hydride/carbide structures in Pd NPs is poorly investigated. We present an operando study of a supported Pd/C catalyst during ethylene hydrogenation reaction in a variable C2H4/H2 ratio. By simultaneous analysis of the extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) spectra, we demonstrated an irreversible behavior in the catalyst structure explained by carbide phase formation even in the instant excess of molecular hydrogen with respect to molecular ethylene in the gas feed. The relevant role of the carbide phase was demonstrated by correlations between the carbide phase amount and ethylene conversion. An interesting behavior of the atomic structure of the Pd NPs has been observed upon periodic variation of the amount of ethylene in the reaction mixture. The obtained results provide significant information about the structural evolution of Pd NPs during ethylene hydrogenation reaction and highlight the importance of operando XANES spectroscopy for characterization of the working catalysts.

The formation of palladium hydride and carbide phases in palladium-based catalysts is a critical process that changes the catalytic performance and selectivity of the catalysts in important industrial reactions, such as the selective hydrogenation of alkynes or alkadienes. We present a comprehensive study of a 5 wt% carbon supported Pd nanoparticle (NP) catalyst in various environments by using in situ and operando X-ray absorption spectroscopy and diffraction, to determine the structure and evolution of palladium hydride and carbide phases, and their distribution throughout the NPs. We demonstrate how the simultaneous analysis of extended X-ray absorption fine structure (EXAFS) spectra and X-ray powder diffraction (XRPD) patterns allows discrimination between the inner “core” and outer “shell” regions of the NP during hydride phase formation at different temperatures and under different hydrogen pressures, indicating that the amount of hydrogen in the shell region of the NP is lower than that in the core. For palladium carbide, advanced analysis of X-ray absorption near-edge structure (XANES) spectra allows the detection of Pd–C bonds with carbon-containing molecules adsorbed at the surface of the NPs. In addition, H/Pd and C/Pd stoichiometries of PdHx and PdCy phases were obtained by using theoretical modelling and fitting of XANES spectra. Finally, the collection of operando time-resolved XRPD patterns (with a time resolution of 5 s) allowed the detection, during the ethylene hydrogenation reaction, of periodic oscillations in the NPs core lattice parameter, which were in phase with the MS signal of ethane (product) and in antiphase with the MS signal of H2 (reactant), highlighting an interesting direct structure–reactivity relationship. The presented studies show how a careful combination of X-ray absorption and diffraction can differentiate the structure of the core, shell and surface of the palladium NPs under working conditions and prove their relevant roles in catalysis.

The effect of a graphitization treatment on the phyisico-chemical properties of an activated carbon have been studied by means of multi-technical approach. Inelastic neutron scattering and DRIFT spectroscopy revealed the modifications occurring at the material borders, involving H-containing species and O-containing functional groups. Information on the structural modifications were obtained by means of Raman spectroscopy and X-Ray Powder Diffraction.

We looked for the active hydrogen species in a highly dispersed and very homogeneous 5 wt% Pt/C industrial catalyst (Pt particle mean diameter of 2.0 ± 0.5 nm) for hydrogenation reactions, by coupling H2 adsorption measurements with Inelastic Neutron Scattering (INS). Taking advantage of the enormous progress undergone by INS instruments, we succeeded in collecting INS spectra of unprecedented quality that allowed us to: (1) demonstrate that the Pt nanoparticles are mainly located at the regular edges of the sp2 graphitic domains on the activated carbon; (2) validate that most of the H2 physisorbed on the carbon is side-on adsorbed; (3) detect for the first time H2 molecules adsorbed on hydride-covered Pt nanoparticles; (4) observe Pt-hydrides (on the Pt/C catalyst with the lowest Pt loading among those investigated by INS so far) and (5) provide evidence for the occurrence of spillover of atomic hydrogen from the Pt surface to unsaturated reactive sites located at the irregular borders of the sp2 domains on the activated carbon.

Nanoparticles research represents one of the most active fields in science due to the importance of nanosized materials in a wide variety of applications. Their characterization needs the comparison of data coming from different experimental techniques, but the peculiar properties of the nanosystem that each technique points out are not always properly taken into account and misleading results have been often reported. In this work, we generated transmission electron microscopy like (TEM-like) data to predict the extended X-ray absorption fine structure (EXAFS) and chemisorption-like typical outputs as the average coordination numbers up to fourth shell of the particles distribution and the surface area. The aim of the simulations is to explore the dependence of the calculated average coordination number (ACN) and average dispersion (AD) values from each parameter characterizing a particle size distribution (PSD), as the mean diameter, the width, the shape, and the profile, and shows that a range of distr...

In a number of hydrogenation reactions, palladium nanoparticles may undergo a transition to the hydride or the carbide phase, which affects the catalytic properties. In the current work, we determine the structural evolution of an industrial Pd/C catalyst in the presence of hydrogen and acetylene by means of in situ X-ray absorption spectroscopy and X-ray powder diffraction. We observe reversible hydride phase formation and irreversible formation of the carbide phase. The near-edge structure of the absorption spectra (XANES) plays the key role in distinguishing between hydride and carbide phases. We show that the presence of hydrogen and carbon atoms have a direct effect on the near-edge region which is reproduced by theoretical simulations performed in the Monte-Carlo approach.

We report an in situ, temperature and H2 pressure-dependent, characterization of (2.6 ± 0.4) nm palladium nanoparticles supported on active carbon during the process of hydride phase formation. For the first time the core–shell structure is highlighted in the single-component particles on the basis of a different atomic structure and electronic configurations in the inner “core” and surface “shell” regions. The atomic structure of these particles is examined by combined X-ray powder diffraction (XRPD), which is sensitive to the crystalline core region of the nanoparticles, and by first shell analysis of extended X-ray absorption fine structure (EXAFS) spectra, which reflects the averaged structure of both the core and the more disordered shell. In the whole temperature range (0–85 °C), XRPD analysis confirms the existence of two well-separated α- and β-hydride phases with the characteristic flat plateau in the phase transition region of the pressure-lattice parameter isotherms. In contrast, first shell in...

In this work we used several complementary techniques (TEM, TPR, CO chemisorption, EXAFS and FTIR spectroscopy) to understand the effects of the activation temperature and activation atmosphere (air or H2) on the particle size distribution, the fraction, and the type of exposed surface sites of Pd nanoparticles supported on a high surface area SiO2−Al2O3 (SA) support. Pd particle distribution has been carefully determined by a high statistic TEM study, from which the cuboctahedral-like shape of the metal particles is demonstrated. Assuming a model of perfect cuboctahedral particles, from the TEM particle size distribution we estimated the expected average Pd first shell coordination number. This value is slightly larger than that directly found by EXAFS owing to the fraction of very small Pd particles (d < 6−8 A) that basically escape TEM detection. The same geometrical model allows prediction, from TEM particle size distribution, of the metal dispersion observed by CO chemisorption (S/VChemi). The S/VChe...

International audience; Activated carbons are widely used as supports for industrial catalysts based on metal nanoparticles. The catalytic performance of carbon-supported catalysts is strongly influenced by the carbon activation method. Notwithstanding this important role, the effect induced by different activation methods has been rarely investigated in detail. This work deals with two carbons of wood origin, activated either by steam or by phosphoric acid, and the corresponding catalysts based on supported Pd nanoparticles. We demonstrate that the catalysts perform in a different way in hydrogenation reactions depending on the nature of the carbon used as a support, being the palladium dispersion the same. We propose a multi-technique approach to fully characterize both carbons and catalysts at the micro-and nanoscale. In particular, we investigate how the activation procedure influences the texture (by N-2 physisorption), the morphology (by Scanning Electron Microscopy), the structure (by Solid State Nuclear Magnetic Resonance, Raman spectroscopy and X-ray Diffraction) and the surface properties (by X-ray Photoelectron Spectroscopy, Diffuse Reflectance Infrared Spectroscopy and Inelastic Neutron Scattering) of carbons and of the related catalysts. The comprehensive characterization approach proposed in this work allows the rationalization, at least in part, of the role of activated carbons in enhancing the performance of a hydrogenation catalyst

The changes in the support morphology, at nano- and micro-scale level, have been investigated along the two-step processes involved in the preparation of a Pd supported on SiO 2 -Al 2 O 3 (SA) catalyst: Pd deposition and K 2 CO 3 doping. During the latter step part of the support dissolves and re-precipitates (partially outside the pores) covering the Pd particles. XRPD shows a significant rearrangement of the support at the long range order scale, while 29 Si and 27 Al solid-state (SS) NMR indicate that the average local environment around both Si and Al atoms remains unaltered.

The preparation by a deposition-precipitation method (using Na2PdCl4 as palladium precursor and Na2CO3 as basic agent) of Pd catalysts supported on γ-Al2O3 and on two different types of activated carbons has been studied by EXAFS and TPR as a function of Pd loading from 0.5 to 5.0 wt%. Independently from the support, neither reduced metal fraction nor crystalline phase has been observed. EXAFS shows that the Pd local environment of the final catalysts changes slightly as a function of the Pd loading from 0.5 to 2.0 wt%: at higher loadings no further modification has been observed.

International audience; Activated carbons arematerials with relevance in different industrial applications. Due to the inherent complexity and heterogeneity of their structures, an easy assignment of the species present on their surface has a challenging result. Only recently, with the possibility to collect well-resolved inelastic neutron spectra and to simulate by DFT methods more or less extended graphitic clusters, this task is starting to become feasible. Here we report our investigation on a steam activated carbon and we show that different vibrations in the region of out-of-plane C-H bending modes are specifically connected to hydrogen terminations belonging to extended and regular borders or to short and defective ones. Furthermore, simulations including heteroatoms such as oxygen allowed us to point out spectral regions with a contribution from carboxyl species