Search

Neutral silicon vacancy (SiV^{0}) centers in diamond are promising candidates for quantum networks because of their excellent optical properties and long spin coherence times. However, spin-dependent fluorescence in such defects has been elusive due to poor understanding of the excited state fine structure and limited off-resonant spin polarization. Here we report the realization of optically detected magnetic resonance and coherent control of SiV^{0} centers at cryogenic temperatures, enabled by efficient optical spin polarization via previously unreported higher-lying excited states. We assign these states as bound exciton states using group theory and density functional theory. These bound exciton states enable new control schemes for SiV^{0} as well as other emerging defect systems.

Nitrogen-vacancy (NV) centers in diamond can be used for nanoscale sensing with atomic resolution and sensitivity; however, it has been observed that their properties degrade as they approach the diamond surface. Here we report that in addition to degraded spin coherence, NV centers within nanometers of the surface can also exhibit decreased fluorescence contrast for optically detected electron spin resonance (OD-ESR). We demonstrate that this decreased OD-ESR contrast arises from charge state dynamics of the NV center, and that it is strongly surface-dependent, indicating that surface engineering will be critical for nanoscale sensing applications based on color centers in diamond.

In search of the right diamond defect Certain defects in diamond are among the most promising physical implementations of qubits, the building blocks of quantum computers. However, identifying a defect with balanced properties is tricky: Nitrogen vacancy centers have a long lifetime but comparatively poor optical properties, whereas negatively charged silicon vacancy centers have the opposite characteristics. Rose et al. used careful materials engineering to stabilize the neutral charge state of silicon vacancy centers and found that they combine long coherence times with excellent optical properties. Science , this issue p. 60

Er3+ ions in crystals are promising for quantum networks. We demonstrate ion implantation of Er3+ into TiO2, a potential low-noise host material, with narrow optical and spin linewidths and high implantation yield.

The nitrogen vacancy (NV) center in diamond exhibits spin-dependent fluorescence and long spin coherence times under ambient conditions, enabling applications in quantum information processing and sensing. NV centers near the surface can have strong interactions with external materials and spins, enabling new forms of nanoscale spectroscopy. However, NV spin coherence degrades within 100 nanometers of the surface, suggesting that diamond surfaces are plagued with ubiquitous defects. Prior work on characterizing near-surface noise has primarily relied on using NV centers themselves as probes; while this has the advantage of exquisite sensitivity, it provides only indirect information about the origin of the noise. Here we demonstrate that surface spectroscopy methods and single spin measurements can be used as complementary diagnostics to understand sources of noise. We find that surface morphology is crucial for realizing reproducible chemical termination, and use these insights to achieve a highly ordered, oxygen-terminated surface with suppressed noise. We observe NV centers within 10 nm of the surface with coherence times extended by an order of magnitude.

Atomic and atom-like defects in the solid-state are widely explored for quantum computers, networks and sensors. Rare earth ions are an attractive class of atomic defects that feature narrow spin and optical transitions that are isolated from the host crystal, allowing incorporation into a wide range of materials. However, the realization of long electronic spin coherence times is hampered by magnetic noise from abundant nuclear spins in the most widely studied host crystals. Here, we demonstrate that Er$^{3+}$ ions can be introduced via ion implantation into TiO$_2$, a host crystal that has not been studied extensively for rare earth ions and has a low natural abundance of nuclear spins. We observe efficient incorporation of the implanted Er$^{3+}$ into the Ti$^{4+}$ site (40% yield), and measure narrow inhomogeneous spin and optical linewidths (20 and 460 MHz, respectively) that are comparable to bulk-doped crystalline hosts for Er$^{3+}$. This work demonstrates that ion implantation is a viable path to studying rare earth ions in new hosts, and is a significant step towards realizing individually addressed rare earth ions with long spin coherence times for quantum technologies.

Integrating atomic quantum memories based on color centers in diamond with on-chip photonic devices would enable entanglement distribution over long distances. However, efforts towards integration have been challenging because color centers can be highly sensitive to their environment, and their properties degrade in nanofabricated structures. Here, we describe a heterogeneously integrated, on-chip, III-V diamond platform designed for neutral silicon vacancy (SiV0) centers in diamond that circumvents the need for etching the diamond substrate. Through evanescent coupling to SiV0 centers near the surface of diamond, the platform will enable Purcell enhancement of SiV0 emission and efficient frequency conversion to the telecommunication C-band. The proposed structures can be realized with readily available fabrication techniques.

Defect-based color centers in wide-bandgap crystalline solids are actively being explored for quantum information science, sensing, and imaging. Unfortunately, the luminescent properties of these emitters are frequently degraded by blinking and photobleaching that arise from poorly passivated host crystal surfaces. Here, a new method for stabilizing the photoluminescence and charge state of color centers based on epitaxial growth of an inorganic passivation layer is presented. Specifically, carbon antisite-vacancy pairs (CAV centers) in 4H-SiC, which serve as single-photon emitters at visible wavelengths, are used as a model system to demonstrate the power of this inorganic passivation scheme. Analysis of CAV centers with scanning confocal microscopy indicates a dramatic improvement in photostability and an enhancement in emission after growth of an epitaxial AlN passivation layer. Permanent, spatially selective control of the defect charge state can also be achieved by exploiting the mismatch in spontaneous polarization at the AlN/SiC interface. These results demonstrate that epitaxial inorganic passivation of defect-based quantum emitters provides a new method for enhancing photostability, emission, and charge state stability of these color centers.

We investigate the neutral charge state of the interstitial silicon split-vacancy defect in diamond for use in quantum communication applications using pulsed electron spin resonance at X-Band magnetic fields (∼3500 G) and confocal microscopy.

A variety of nanoscale photonic, mechanical, electronic, and optoelectronic devices require scalable thin film fabrication. Typically, the device layer is defined by thin film deposition on a substrate of a different material, and optical or electrical isolation is provided by the material properties of the substrate or by removal of the substrate. For a number of materials this planar approach is not feasible, and new fabrication techniques are required to realize complex nanoscale devices. Here, we report a three-dimensional fabrication technique based on anisotropic plasma etching at an oblique angle to the sample surface. As a proof of concept, this angled-etching methodology is used to fabricate free-standing nanoscale components in bulk single-crystal diamond, including nanobeam mechanical resonators, optical waveguides, and photonic crystal and microdisk cavities. Potential applications of the fabricated prototypes range from classical and quantum photonic devices to nanomechanical-based sensors and actuators.

We investigated the effect of substrate-induced strain on the metal-insulator transition (MIT) in single-crystalline VO(2) nanobeams. A simple nanobeam-substrate adhesion leads to uniaxial strain along the nanobeam length because of the nanobeam's unique morphology. The strain changes the relative stability of the metal (M) and insulator (I) phases and leads to spontaneous formation of periodic, alternating M-I domain patterns during the MIT. The spatial periodicity of the M-I domains can be modified by changing the nanobeam thickness and the Young's modulus of the substrate.

We report a new approach for realizing a flexible photonic crystal (PC) cavity that enables wide-range tuning of its resonance frequency. Our PC cavity consists of a regular array of silicon nanowires embedded in a polydimethylsiloxane (PDMS) matrix and exhibits a cavity resonance in the telecommunication band that can be reversibly tuned over 60 nm via mechanical stretching-a record for two-dimensional (2D) PC structures. These mechanically reconfigurable devices could find potential applications in integrated photonics, sensing in biological systems, and smart materials.

We propose and demonstrate a new approach for achieving strong light-matter interactions with quantum emitters. Our approach makes use of a plasmon resonator composed of defect-free, highly crystalline silver nanowires surrounded by patterned dielectric distributed Bragg reflectors (DBRs). These resonators have an effective mode volume (Veff) two orders of magnitude below the diffraction limit and quality factor (Q) approaching 100, enabling enhancement of spontaneous emission rates by a factor exceeding 75 at the cavity resonance. We also show that these resonators can be used to convert a broadband quantum emitter to a narrowband single-photon source with color-selective emission enhancement.

A bulk nanomachining technique to realize suspended photonic structures in diamond is presented. The developed fabrication methodology, employs oxygen plasma etching and yields free-standing nanobeam waveguides and photonic crystal cavities.

Many advanced applications of diamond materials are now being limited by unknown surface defects, including in the fields of high power/frequency electronics and quantum computing and quantum sensing. Of acute interest to diamond researchers worldwide is the loss of quantum coherence in near-surface nitrogen-vacancy (NV) centers and the generation of associated magnetic noise at the diamond surface. Here for the first time is presented the observation of a family of primal diamond surface defects, which is suggested as the leading cause of band-bending and Fermi-pinning phenomena in diamond devices. A combination of density functional theory and synchrotron-based X-ray absorption spectroscopy is used to show that these defects introduce low-lying electronic trap states. The effect of these states is modeled on band-bending into the diamond bulk and it is shown that the properties of the important NV defect centers are affected by these defects. Due to the paramount importance of near-surface NV center properties in a growing number of fields, the density of these defects is further quantified at the surface of a variety of differently-treated device surfaces, consistent with best-practice processing techniques in the literature. The identification and characterization of these defects has wide-ranging implications for diamond devices across many fields.