Search

Modern development of flexible electronics has made use of bioelectronic materials as artificial tissue in vivo. As hydrogels are more similar to nerve tissue, functional hydrogels have become a promising candidate for bioelectronics. Meanwhile, interfacing functional hydrogels and living tissues is at the forefront of bioelectronics. The peripheral nerve injury often leads to paralysis, chronic pain, neurologic disorders, and even disability, because it has affected the bioelectrical signal transmission between the brain and the rest of body. Here, a kind of light-stimuli-responsive and stretchable conducting polymer hydrogel (CPH) is developed to explore artificial nerve. The conductivity of CPH can be enhanced when illuminated by near-infrared light, which can promote the conduction of the bioelectrical signal. When CPH is mechanically elongated, it still has high durability of conductivity and, thus, can accommodate unexpected strain of nerve tissues in motion. Thereby, CPH can better serve as an implant of the serious peripheral nerve injury in vivo, especially in the case that the length of the missing nerve exceeds 10 mm.

Lithium dendrite related problems form a major barrier that limits the application of lithium metal anode for Li-ion batteries. Here a copper coated 3D soft fabric anode was developed to show superior battery performance under an optimized mechanical stress for the lithium metal anode application. A scalable two-step dip-coating method was applied to coat Cu onto various insulating cloth fabrics, making them electrically conductive. In our battery tests, the 3D soft conductive fabric contributes to a more uniform lithium deposition during the battery cycling, which works for more than 1000 h. The mechanism for suppressing lithium dendrite growth by the mechanical interaction with 3D Cu-fabric was also revealed by a combination of microscopy characterization, electrochemical test and theoretical modeling, which provides the design principle for their future applications in lithium metal anode batteries.

The rapid growth of miniaturized electronic devices has raised the demand for compact, flexible, wearable, and non-volatile memory units. However, integration into nanoelectronic devices requires a scaled-down data-storage component, but this often results in the deterioration of the ferroelectric switching performance. Herein, we demonstrate a simple and scalable fabrication of poly (vinylidene fluoride trifluoroethylene) [P(VDF-TrFE)] film with graphene oxide (GO) nanosheets. Using piezoresponse force microscopy (PFM), the storage features of this multilayer film were investigated, including establishment of two stable memory states, ferroelectric switching dynamics in the point-polarization and linear-polarization modes, and time and thermal stability of information storage. Remarkably, the GO-P(VDF-TrFE) film favored formation of low-temperature (LT) ferroelectric phase with much more ordered sequences of trans conformations relative to pristine P(VDF-TrFE) due to the presence of electrostatic interaction between GO nanosheets and C F dipoles of P(VDF-TrFE), thus affording improved ferroelectric properties. The GO-P(VDF-TrFE) film showed several excellent storage features, such as ultra-high density of more than 300 Gbits in−2, good writing & erasing repeatability, long data retention time, and elevated device operation temperature. In-depth understanding and utilization of the excellent non-volatile memory performance of this new GO-ferroelectric system will open new avenues for the next generation of nanoelectronic devices.

In this study, we design a compact sensor with high sensitivity for refractive index change. A pulley-type metallic microring to produce surface plasmon polariton is proposed. The light is coupled onto the metallic microring using a dielectric waveguide. The 2-D finite-difference time-domain method is used to determine the optimal radius of the metallic microring. We also investigate the relation between the radius of the metallic microring and the sensitivity of the refractive index change. The highest sensitivity of 602.69 nm/RIU can be obtained at the resonance wavelength of 1536.7 nm. Keywords: Sensor, Ring resonator, Surface plasmon polariton

The degeneration of dopaminergic neurons is a major contributor to the pathogenesis of mid-brain disorders. Clinically, cell therapeutic solutions, by increasing the neurotransmitter dopamine levels in the patients, are hindered by low efficiency and/or side effects. Here, a strategy using electromagnetized nanoparticles to modulate neural plasticity and recover degenerative dopamine neurons in vivo is reported. Remarkably, electromagnetic fields generated by the nanoparticles under ultrasound stimulation modulate intracellular calcium signaling to influence synaptic plasticity and control neural behavior. Dopaminergic neuronal functions are reversed by upregulating the expression tyrosine hydroxylase, thus resulting in ameliorating the neural behavioral disorders in zebrafish. This wireless tool can serve as a viable and safe strategy for the regenerative therapy of the neurodegenerative disorders.

A high-optical-resolution artificial retina system that accurately communicates with the optic nerve is the main challenge in the modern biological science and bionic field. Here, we developed a bionic artificial retina possessing phototransduction "cells" with measurements even smaller than that of the neural cells. Using the technique of micrometer processing, we constructed a pyramid-shape periodic microarray of a photoreceptor. Each "sensing cell" took advantage of polythiophene derivative/fullerene derivative (PCBM) as a photoelectric converter. Because folic acid played an essential role in eye growth, we particularly modified the polythiophene derivatives with folic acid tags. Therefore, the artificial retina could enlarge the contact area and even recognize the nerve cells to improve the consequence of nerve stimulation. We implanted the artificial retina into blinded rats' eyes. Electrophysiological analysis revealed its recovery of photosensitive function 3 months after surgery. Our work provides an innovative idea for fabricating a high-resolution bionic artificial retina system. It shows great potential in artificial intelligence and biomedicine.

Wireless micro- and nanorobots are biomedical devices with a potential use in high-precision minimally invasive therapies. Here, a highly integrated multifunctional soft microrobot is developed for targeted cell therapy applications, featuring targeted cell transportation and induced cell differentiation. The micromachines are made of composites consisting of a soft piezoelectric polymer matrix in which magnetic nanoparticles are dispersed. The magnetic nanoparticles serve as the component for the device's magnetic actuation, while the piezoelectric polymer acts as both a steerable scaffold and an acoustically responsive cell electrostimulation platform. With the application of a rotating magnetic field, the microrobots swim in a corkscrew motion in different liquid environments that mimic human body fluids. When the swimmers are subjected to acoustic waves, their piezoelectric body is electrically polarized which induces cell differentiation of neuron-like PC12 cells loaded on the swimmers surface. This combinatorial technique may open up new avenues for bioelectronic therapies., Materials Horizons, 6 (7)

Herein, the crystallization behavior, thermal stability, phase composition, and magnetic properties of Co66.5Si15.5B12Fe4Ni2 amorphous alloy were determined via differential scanning calorimetry, X-ray diffraction analysis, and vibrating sample magnetometry. The heating rate was found to strongly affect the glass-transition and crystallization behavior of Co66.5Si15.5B12Fe4Ni2 solidified ribbon. Based on the crystallization behavior, the relationship between the glass-transition temperature (Tg) and the heating rate (lnβ) was derived as Tg = 6lnβ + 709 and the glass-transition activation energy, initial crystallization activation energy, first crystallization peak activation energy, and the second crystallization peak activation energy were also calculated. Based on the results, the nucleation mechanism of the crystallization of Co66.5Si15.5B12Fe4Ni2 amorphous alloy and the crystallization products of the annealing crystallization process were discussed. The phase composition after short-term annealing at a low temperature was found to be β-Co + α-Co + Ni3Fe + Ni4B + Ni2Si. Following high-temperature, long-term annealing, Ni2Si disappeared completely and a new phase, FeSi, was formed. By studying the coercivity, remanence, saturation magnetization, and magnetic anisotropy of the alloy, we obtained the best processing parameters for comprehensive soft magnetic properties. The results provide guidance on the development of new soft magnetic materials.

Marine biofouling can be better governed by using super-hydrophobic and lubricant leaching behavior. It was prepared for a long time super-hydrophobic fouling release coating with the incorporation of phenylmethylsilicone oil as lubricant. With the reasonable control of the mass ratio of mixed nano-particles (hydroxylated multi-walled carbon nanotube and nano-magnetite), prepared reinforced coating has excellent super-hydrophobicity and lubricant leaching efficiency. Comparable studies with reported FR coating and commercial silicone coating, it exhibits excellent anti-biofilm adhesion performance with up to 98 % of biofilm adhesion removal rate. More beneficial, the isolation layer composed of the leached phenylmethylsilicone oil can make a good buffer effect for the reinforced coating surface, alleviating the deformation or damage caused by the friction between sand and the reinforced coating surface, effectively. This work is establishing new investments in environment-friendly fouling release coatings.

A bioinspired photodetector with signal transmissible to neuron cells is fabricated. Photoisomerization of the dye molecules embedded in the ferroelectric polymer membrane achieves electric polarization change under visible light. The photodetector realizes high sensitivity, color recognition, transient response, and 3D visual detection with resolution of 25 000 PPI, and, impressively, directly transduces the signal to neuron cells.

Ferroelectric polymers are of interest as most promising electroactive materials. Flexible transducers from ferroelectric polymer thin film with underneath semiconducting polymer active layer for high sensitive and versatile detection of physiological signals are described. When attached directly on the wrist, the flexible transducers can distinguish the transient pulse waves non-invasively and in situ, due to their fast response (milliseconds) and high sensitivity (down to several Pascal) to instantaneous change of blood pressure. High-resolution picture of one pulse wave is available to provide two most common parameters for arterial stiffness diagnosis. The transducers are also suitable for dynamic recognizing physiological signals under both physical exercise and medicine treatment, demonstrating their enormous potential for warning the risk of cardiovascular disease, and evaluating the efficacy of heart medicines. The transducers are easy to carry around with an operating voltage of 1 V and the power consumption less than 1 μW. Thus, they are valuable for applications like electronic skin and mobile health monitoring.

Phase structures and transitions of a series of biphenyl containing side-chain liquid crystalline polyacetylenes (SCLCPAs) with different length of spacer and alkyl tail, poly((m + 2)-{[(4′-alkyloxy-4-biphenylyl)carbonyl]oxy}-1-yne) [P-m,7 (m = 4, 5, 8), P-m,5 (m = 9), P-m,5L (m = 3, 9), m is the number of methylene units in the spacer], were studied by differential scanning calorimeter, polarized light microscopy, one- and two-dimensional wide-angle X-ray diffraction. It is revealed that phase structures of the samples are strongly dependent on the lengths of spacer and alkyl tail. The samples with short spacer (m ≤ 4) render the molecular shape of sheet-like due to the strong coupling between the backbone and the biphenyl groups on side-chains. They form highly ordered smectic phase with an additional ordering on the subnanometer scale (SmXo) at low temperatures. For m > 5, P-m,7 exhibits the low-temperature phase of smectic B (SmB), while P-9,5 and P-9,5L form smectic E (SmE). As the long spacers adopt...

Through utilizing individual nanodots, as smallest memory units, to convert stress into readable electronic information, we report force-induced high-density data storage in the periodic nanostructure of ferroelectric polymer fabricated by nanoimprinting lithography. The nanostructure is ideal for the stress concentration and increasing the non-uniformity of strains, thus leading to strain gradients inversely proportional to the feature size. A force as low as 400 nN is applied to generate the internal electric field in response to strain gradients and switch polarization state of each memory unit. It can achieve storage density theoretically up to TB/inch2 with the up-to-date nanofabrication technology to miniaturize the unit size.

The phase structures and transition behaviors of a series of side-chain liquid crystalline (LC) polymethacrylates based on p-methoxyazobenzene (PMnAzs, n ¼ 6, 8, 10, 12) were studied using differential scanning calorimetry, one- and two-dimensional (1D and 2D) wide-angle X-ray diffraction, and Fourier transform infrared spectroscopic experiments. The LC phase transition of PMnAz follows the sequence of smectic A (SmA)4 nematic (N)4 isotropic (I). For PM10Az and PM12Az, the transition of SmA-to-N is not complete upon heating. In the low-temperature SmA phase, the polymers adopt a fully interdigitated side-chain packing with the smectic layer period almost identical to the side-chain length. For all the four samples, the first-order diffraction of the SmA structure only renders when the temperature approaches the transition of SmA 4 N, with the intensity much lower than that of the second-order diffraction. The absence of the first-order diffraction at low temperatures is ascribed to the possible matching of the electron densities between the center portion of the side-chain sublayer and the main-chain sublayer of the SmA structure. Since only the mesogens from the same main-chain sublayer can stack parallel together, the distribution of the azobenzene domains may cause some sort of density undulation within the smectic layer. Among the samples, PM6Az presents the strongest undulation with some additional orders. We also examined the annealing effect on the H-aggregation of PMnAzs. It is found that isothermal annealing at a temperature slightly higher than the T g of PM8Az and PM10Az can significantly enhance