Search

Reported here is a 2D, interfacial microcompartmentalization strategy governed by 3D phase separation. In aqueous polyethylene glycol (PEG) solutions doped with biotinylated polymers, the polymers spontaneously accumulate in the interfacial layer between the oil‐surfactant‐water interface and the adjacent polymer phase. In aqueous two‐phase systems, these polymers first accumulated in the interfacial layer separating two polymer solutions and then selectively migrated to the oil‐PEG interfacial layer. By using polymers with varying photopolymerizable groups and crosslinking rates, kinetic control and capture of spatial organisation in a variety of compartmentalized macroscopic structures, without the need of creating barrier layers, was achieved. This selective interfacial accumulation provides an extension of 3D phase separation towards synthetic compartmentalization, and is also relevant for understanding intracellular organisation., The phenomenon selective interfacial accumulation (SIA) is reported for an aqueous system. Based on interfacial migration, kinetic control and capture of the spatial organisation in a variety of compartmentalized macroscopic structures, without the need to create barrier layers between compartments, is possible. SIA opens an avenue for 3D phase separation approaches towards synthetic compartmentalized systems, and it is also relevant to understanding and mimicking intracellular organisation.

Properties such as shear modulus, gelation time, structure of supramolecular hydrogels are strongly dependent on self‐assembly, gelation triggering mechanism and processes used to form the gel. In our work we extend reported rheology analysis methodologies to pH‐triggered supramolecular gels to understand structural insight using a model system based on N−N’ Dibenzoyl‐L‐Cystine pH‐triggered hydrogelator and Glucono‐δ‐Lactone as the trigger. We observed that Avrami growth model when applied to time‐sweep rheological data of gels formed at lower trigger concentrations provide estimates of fractal dimension which agree well compared with visualization of the microstructure as seen via Confocal Laser Scanning Microscopy, for a range of gelator concentrations., Unlocking microstructure via the mechanical properties of hydrogels: Using rheology, mathematical models and confocal laser scanning microscopy, the gelation of a pH‐triggered low molecular weight gelator is studied using an acid trigger. For a range of gelator and trigger concentrations, Avrami model predictions agree with confocal micrographs. The work helps extend models created on temperature‐triggered gelators to chemically‐triggered systems.

The adhesiveness of biological micropatterned adhesives primarily relies on their geometry (e.g., feature size, architecture) and material properties (e.g., stiffness). Over the last few decades, researchers have been mimicking the geometry and material properties of biological micropatterned adhesives. The performance of these biomimetic micropatterned adhesives is usually tested on hard substrates. Much less is known about the effect of geometry, feature size, and material properties on the performance of micropatterned adhesives when the substrate is deformable. Here, micropatterned adhesives of two stiffness degrees (Young’s moduli of 280 and 580 kPa) were fabricated from poly(dimethylsiloxane) (PDMS) and tested on soft poly(vinyl alcohol) (PVA) substrates of two stiffness degrees (12 and 18 kPa), and on hard glass substrates as a reference. An out-of-the-cleanroom colloidal lithographic approach was successfully expanded to fabricate adhesives with two geometries, namely dimples with and without a terminal layer. Dimples without a terminal layer were fabricated on two length scales, namely with sub-microscale and microscale dimple diameters. The cross section of samples with a terminal layer showed voids with a spherical shape, separated by hourglass-shaped walls. These voids penetrate the terminal layer, resulting in an array of holes at the surface. We found that on soft substrates, generally, the size of the dimples did not affect pull-off forces. The positive effects of sub-microscale features on pull-off and friction forces, such as defect control and crack trapping, as reported in the literature for hard substrates, seem to disappear on soft substrates. The dimple geometry with a terminal layer generated significantly higher pull-off forces compared to other geometries, presumably due to interlocking of the soft substrate into the holes of the terminal layer. Pull-off from soft substrates increased with the substrate stiffness for all tested geometries. Friction forces on soft substrates were the highest for microscale dimples without a terminal layer, likely due to interlocking of the soft substrate between the dimples.

Gelled lyotropic liquid crystals (LLCs) are highly tunable multi-component materials. By studying a selection of low molecular weight gelators (LMWGs), we find gelators that form self-assembled gels in LLCs without influencing their phase boundaries. We studied the system H2O/NaCl-Genapol LA070 in the presence of (a) the organogelators 12-hydroxyoctadecanoic acid (12-HOA) and 1,3:2,4-dibenzylidene-d-sorbitol (DBS) and (b) the hydrogelators N,N'-dibenzoyl-l-cystine (DBC) and a tris-amido-cyclohexane derivative (HG1). Visual phase studies and oscillation shear frequency sweeps confirmed that 12-HOA acts as co-surfactant (stabilizing the lamellar Lα phase and destabilizing the hexagonal H1 phase), thus preventing gelation. Conversely, DBS was a potent gelator for LLCs, with the phase boundaries un-influenced by the presence of DBS; gelled lamellar Lα, and softly-gelled hexagonal H1 phases are formed. For the hydrogelator DBC, the LLC phase boundaries were only slightly altered, but no gelled LLCs were formed. For the hydrogelator HG1, however, the phase boundaries were unaffected while gelled lamellar Lα and softly-gelled hexagonal H1 phases were formed. Temperature-dependent rheology measurements demonstrated that by changing the DBS or the HG1 concentration, the sol-gel transition temperature of the gelled lamellar Lα phase can be adjusted such that (a) Tsol-gel is below the Lα-isotropic phase transition (DBS, HG1 mass fraction η = 0.0075) and (b) Tsol-gel is above the gelled Lα-isotropic phase transition (DBS, HG1 η = 0.015). This opens the possibility of temporal materials control by addressing phase transitions in different orders. As this system contains oil and water, both the organogelator DBS and the hydrogelator HG1 can gel these LLCs, but this clearly does not apply to all organogelators/hydrogelators. The study indicates that careful optimization of LMWGs is required to avoid interaction with the surfactant layer and to optimize the Tsol-gel value, which is important for the application of LMWGs in gelled LLCs.

Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self‐orientation of crescent‐shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as micro‐buckets to carry living cells. In aqueous solution, the microparticles spontaneously rotated to a preferred orientation with the cavity facing up. We developed a geometric model that explains the self‐orienting behavior of crescent‐shaped particles by minimizing the potential energy of this specific morphology. Finally, we selectively modified the particles’ cavities with RGD peptide and exploited their preferred orientation to load them with living cells. Cells could adhere, proliferate, and be transported and released in vitro. These micro‐buckets hold a great potential for applications in smart materials, cell therapy, and biological engineering.

While the formation of (tri)block copolymer hydrogels has been extensively investigated, such studies mostly focused on equilibrium self-assembling whereas the use of preformed structures as building blocks such as out of equilibrium, quenched, nanofibrillar micelles is still a challenge. Here, we demonstrate that quenched, ultralong polystyrene-b-poly(ethylene oxide) (PS-b-PEO) micelles can be used as robust precursors of hydrogels. Two cross-linking strategies, (i) thermal fusion of micellar cores and (ii) chemical cross-linking of preformed micellar coronas were studied. The gelation process and the structure of the micellar networks were investigated by in situ rheological measurements, confocal microscopy and transmission electron microscopy. Direct observation of core fusion of preformed quenched micelles is provided validating this method as a robust gelation route. Using time sweep rheological experiments, it was found for both cross-linking methods that these 3D "mikado" gels are formed in three different stages, containing (1) initiation, (2) transition (growth), and (3) stabilization regimes.

Self-assembly provides access to a variety of molecular materials, yet spatial control over structure formation remains difficult to achieve. Here we show how reaction–diffusion (RD) can be coupled to a molecular self-assembly process to generate macroscopic free-standing objects with control over shape, size, and functionality. In RD, two or more reactants diffuse from different positions to give rise to spatially defined structures on reaction. We demonstrate that RD can be used to locally control formation and self-assembly of hydrazone molecular gelators from their non-assembling precursors, leading to soft, free-standing hydrogel objects with sizes ranging from several hundred micrometres up to centimeters. Different chemical functionalities and gradients can easily be integrated in the hydrogel objects by using different reactants. Our methodology, together with the vast range of organic reactions and self-assembling building blocks, provides a general approach towards the programmed fabrication of soft microscale objects with controlled functionality and shape.

Supramolecular assemblies are promising building blocks for the fabrication of functional soft devices for high-tech applications. However, there is a lack of effective methods for large-scale manipulation and integration of nano-sized supramolecular structures on soft substrate. Now, functional soft devices composed of micellar filaments and hydrogels can be created through a versatile approach involving guided dewetting, transfer-printing, and laser-assisted patterning. Such an approach enables unprecedented control over the location and alignment of the micellar filaments on hydrogel substrates. As examples, freely suspended micellar fishnets immobilized on hydrogels are formed, showing the capability of trapping and releasing micro-objects and the piconewton force sensitivity. By incorporating responsive moieties into hydrogels, shape-morphing actuators with micelle-controlled rolling directionality are constructed.

Controlled localization of platinum nanoparticles (Pt NPs) at a solid support assisted by a polarized liquid-liquid interface is reported. Electrocatalytic water oxidation resulted in local pH modulation followed by the directed self-assembly of a dibenzoyl-l-cystine hydrogelator forming a structured hydrogel retaining the shape of the Pt NP deposit.

Transient materials that function out-of-equilibrium have been of great interest due to their unique properties that are rarely observed in thermodynamically stable occasions. However, the current advances are still limited to supramolecular objects, and the applications using this transient nature remain largely unexplored. Herein we report on chemical fuel powered transient polymer hydrogels for controlled formation and free release of pharmaceutical crystals. The transient polymer hydrogels with highly tunable stiffness and lifetime were created by chemical fuel powered crosslinking, which can be well regenerated without obvious deteriorations by simply refueling. On the basis of these properties, especially the transient nature, these hydrogels can serve as novel reusable platforms to control the pharmaceutical crystallization, more importantly, freely release the obtained crystals, which is inaccessible by conventional static gels. This work is expected to serve as an example to accelerate the development of more advanced out-of-equilibrium materials and exploitations of their high-tech applications.

To examine the mechanism of the network formation of silk fibroin (SF), monodispersed colloidal particles (MDCPs) are used as well defined foreign substrates to quantify their effect on the primary nucleation of β-crystallites in molecular networks (silk nanofibrils) and the hierarchical network formation of SF. It follows that MDCPs are capable of accelerating the SF gelation by reducing the multistep nucleation barrier, which gives rise to a high density of silk fibril domain networks due to the increase of primary nucleation sites. Consequently, through governing the change in the hierarchical mesoscopic structure, the macroscopic performance of silk materials (e.g., the rheological properties of SF hydrogels and the tensile stress of fibers) can be controlled directly. As SF hydrogels represent a typical example of weak fibril domain–domain network interactions, the increase of fibril domain density leads to weaker gels. On the other hand, SF fibers correspond to strong fibril domain–domain network interactions, the increase of fibril domain density ends up with much tougher fibers. The knowledge obtained provides a facile strategy in controlling the complex hierarchical structure and macroscopic performance of SF materials, and offers useful routes for general design and functionalization of soft materials.

This work describes a facile approach allowing Dibenzoyl- l -Cystine (DBC) based hydrogel controlled deposition and controlled detachments over a conducting support. The method itself is an electrochemically assisted approach, where the water oxidation at the electrode surface results in a local pH drop inducing DBC gelation and hydrogel formation. We have comprehensively described the possibility of the hydrogel shaping by alternating the anodic deposition potential, DBC concentration and finally the working electrode geometry. The latter includes macro-electrodes in a form of platinum discs having diameter equal to 200 and 500 μm; hexagonal arrays of circular platinum microelectrodes with a diameter of a single electrode equal to 5 or 10 μm and custom made platinum microelectrodes, having the shape of circles, triangles and squares, that are used to shape the microgels. Over the course of our work we were able to define the conditions to form a number of different hydrogel shapes such as: (i) flat and planar deposits; (ii) hemispherical deposits with an oxygen bubble pocket; (iii) spongy hydrogel structures or (iv) hemispherical micro-cups build from radially oriented DBC fibres directionally growing from the support. Furthermore, we were also able to remotely form and then detach the hydrogel deposit in the initial formulation solution using only an electrochemical trigger. Our work represents a solid proof of concept and opens a number of new avenues for the electrochemically assisted soft matter fabrication down to micrometre scale.

Controlled diffusion, reaction and assembly of hydrogelator precursors can be used to create soft hydrogel objects of defined shape and size. In this study we show that controlling local reaction kinetics by means of pH, diffusion length and the concentrations of reactants allows control over the dimensions of formed supramolecular structures. By correlating a reaction diffusion model to experimental results, we show that the influence of all these control parameters can be unified using the Damko hler number, thus providing an easy-to-use relation between experimental parameters and structure dimensions. Finally, our study suggests that control over concentration gradients and chemical reactivity in combination with supramolecular chemistry is a promising platform for the design of soft matter objects of defined sizes, a concept that has received little attention up until now.

Herein, the micropatterning of supramolecular gels with oriented growth direction and controllable spatial dimensions by directing the self-assembly of small molecular gelators is reported. This process is associated with an acid-catalyzed formation of gelators from two soluble precursor molecules. To control the localized formation and self-assembly of gelators, micropatterned poly(acrylic acid) (PAA) brushes are employed to create a local and controllable acidic environment. The results show that the gel formation can be well confined in the catalytic surface plane with dimensions ranging from micro- to centimeter. Furthermore, the gels show a preferential growth along the normal direction of the catalytic surface, and the thickness of the resultant gel patterns can be easily controlled by tuning the grafting density of PAA brushes. This work shows an effective "bottom-up" strategy toward control over the spatial organization of materials and is expected to find promising applications in, e.g., microelectronics, tissue engineering, and biomedicine.

A novel and facile approach to fabricating well-organized macroscopic 2D networks of cylindrical micelles is reported, based on transfer printing and thermal welding of aligned supramolecular micelles of block copolymers. This versatile approach provides a new strategy for fabricating functional 2D superstructures with a higher level of order.

The work presented here shows that the growth of supramolecular hydrogel fibers can be spatially directed at the nanoscale by catalytic negatively charged nanoparticles (NCNPs). The NCNPs with surfaces grafted with negatively charged polymer chains create a local proton gradient that facilitates an acid-catalyzed formation of hydrogelators in the vicinity of NCNPs, ultimately leading to the selective formation of gel fibers around NCNPs. The presence of NCNPs has a dominant effect on the properties of the resulting gels, including gelation time, mechanical properties, and network morphology. Interestingly, local fiber formation can selectively entrap and precipitate out NCNPs from a mixture of different nanoparticles. These findings show a new possibility to use directed molecular self-assembly to selectively trap target nano-objects, which may find applications in therapy, such as virus infection prevention, or engineering applications, like water treatment and nanoparticle separation.

The use of dissipative self-assembly driven by chemical reaction networks for the creation of unique structures is gaining in popularity. In dissipative self-assembly, precursors are converted into self-assembling building blocks by the conversion of a source of energy, typically a photon or a fuel molecule. The self-assembling building block is intrinsically unstable and spontaneously reverts to its original precursor, thus giving the building block a limited lifetime. As a result, its presence is kinetically controlled, which gives the associated supramolecular material unique properties. For instance, formation and properties of these materials can be controlled over space and time by the kinetics of the coupled reaction network, they are autonomously self-healing and they are highly adaptive to small changes in their environment. By means of an example of a biological dissipative self-assembled material, the unique concepts at the basis of these supramolecular materials will be discussed. We then review recent efforts towards man-made dissipative assembly of structures and how their unique material properties have been characterized. In order to help further the field, we close with loosely defined design rules that are at the basis of the discussed examples.

This protocol details the preparation of low-molecular-weight hydrogels (LMWGs) in which the gelation time and mechanical stiffness of the final gel can be tuned with the concentration of the catalyst used in the in situ formation of the hydrogelator. By altering the rate of formation of the hydrazone-based gelator from two water-soluble compounds--an oligoethylene functionalized benzaldehyde and a cyclohexane-derived trishydrazide--in the presence of acid or aniline as catalyst, the kinetics of gelation can be tuned from hours to minutes. The resulting materials display controllable stiffness in the 5-50 kPa range. This protocol works at ambient temperatures in water, at either neutral or moderately acidic pH (phosphate buffer, pH 5) depending on the catalyst used. The hydrazide and aldehyde precursors take a total of 5 d to prepare. The final gel is prepared by mixing aqueous solutions of the two precursors and can take between minutes and hours to set, depending on the catalytic conditions. We also describe analysis of the hydrogels by critical gel concentration (CGC) tests, rheology and confocal laser-scanning microscopy (CLSM).

Catalyst-assisted self-assembly is widespread in nature to achieve spatial control over structure formation. Reported herein is the formation of hydrogel micropatterns on catalytic surfaces. Gelator precursors react on catalytic sites to form building blocks which can self-assemble into nanofibers. The resulting structures preferentially grow where the catalyst is present. Not only is a first level of organization, allowing the construction of hydrogel micropatterns, achieved but a second level of organization is observed among fibers. Indeed, fibers grow with their main axis perpendicular to the substrate. This feature is directly linked to a unique mechanism of fiber formation for a synthetic system. Building blocks are added to fibers in a confined space at the solid–liquid interface.

This work examines the self-collimation effect of silk materials on fluorescence emission/detection. A macroscopic regulation strategy, coupled with meso-reconstruction and meso-functionalization, is adopted to amplify the fluorescence emission of organic fluorescent dyes (i.e., Rhodamine 6G (R6G)) using silk photonic crystal (PC) films. The fluorescence emission can be linearly enhanced or inhibited by a PC as a result of the photonic bandgap coupling with the excitation light and/or emission light. Depending on the design of the silk fluorescence collimator, the emission can reach 49.37 times higher than the control. The silk fluorescence collimator can be applied to achieve significant benefits: for instance, as a humidity sensor, it provides good reproducibility and a sensitivity of 28.50 a.u./% relative humidity, which is 80.78 times higher than the sensitivity of the control, and as a novel curtain, it raises the energy conversion efficiency of the semitransparent dye-sensitized solar cells (DSSCs) by 16%.

The use of polymeric crosslinkers is an attractive method to modify the mechanical properties of supramolecular materials, but their effects on the self-assembly of the underlying supramolecular polymer networks are poorly understood. Modulation of the gelation pathway of a reaction-coupled low molecular weight hydrogelator is demonstrated using (bio)polymeric crosslinkers of disparate physicochemical identities, providing a handle for control over materials properties.

We report the continuous production of microcapsules composed of an aqueous core and permeable hydrogel shell, made stable by the controlled photo-cross-linking of the shell of an all-aqueous double emulsion. While most previous work on water-based emulsions focused on active droplet formation, here double emulsion droplets were spontaneously generated at a three-dimensional flow-focusing junction through the break-up of a double jet formed by immiscible aqueous solutions of polyethylene glycol and cross-linkable dextrans. The capsules obtained with this lipid-free, organic-solvent-free, and surfactant-free approach displayed excellent stability under a variety of harsh conditions (3

We demonstrate and investigate how a propagating acidic wave in a solution of dibenzoyl-L-cystine (DBC) can lead to the orientation and alignment of self-assembled fibers constituting a hydrogel. Taking advantage of its pH-induced self-assembly, a hydrogel composed of parallel fibers can be formed by propagating a pH gradient front from one part of a cell to the other. The diffusing species (typically the ion pair H+–Cl−) control the velocity of the pH-gradient front and, therefore, their diffusion rate should match the gelation rate so as to attain complete orientation.

In recent years, we have developed a low molecular weight hydrogelator system that is formed in situ under ambient conditions through catalysed hydrazone formation between two individually non-gelating components. In this contribution, we describe a molecular toolbox based on this system which allows us to (1) investigate the limits of gel formation and fine-tuning of their bulk properties, (2) introduce multicolour fluorescent probes in an easy fashion to enable high-resolution imaging, and (3) chemically modify the supramolecular gel fibres through click and non-covalent chemistry, to expand the functionality of the resultant materials. In this paper we show preliminary applications of this toolbox, enabling covalent and non-covalent functionalisation of the gel network with proteins and multicolour imaging of hydrogel networks with embedded mammalian cells and their substructures. Overall, the results show that the toolbox allows for on demand gel network visualisation and functionalisation, enabling a wealth of applications in the areas of chemical biology and smart materials.

Molecular patterning has received a lot of attention in the past decade; however, the functionalization of these surface-confined 2D patterns on the nanoscale level remains a challenge. Assembling 2D patterns from oligomeric foldamers turns out to be an interesting approach to accomplishing the controlled positioning of functional elements. We designed a family of peptidomimetic foldamers bearing a 2D turn element folding at the liquid/solid interface. The turning element was developed while studying derivatives with one turning unit. Furthermore, folding was found to be induced by the confinement of the surface. This achievement paves the way for the design of foldamers with multiple turns, providing a higher versatility in the functionalization of nanopatterns.

This paper presents a method to form micron-sized droplets in an aqueous two-phase system (ATPS) and to subsequently polymerize the droplets to produce hydrogel beads. Owing to the low interfacial tension in ATPS, droplets do not easily form spontaneously. We enforce the formation of drops by perturbing an otherwise stable jet that forms at the junction where the two aqueous streams meet. This is done by actuating a piezo-electric bending disc integrated in our device. The influence of forcing amplitude and frequency on jet breakup is described and related to the size of monodisperse droplets with a diameter in the range between 30 and 60 μm. Rapid on-chip polymerization of derivatized dextran inside the droplets created monodisperse hydrogel particles. This work shows how droplet-based microfluidics can be used in all-aqueous, surfactant-free, organic-solvent-free biocompatible two-phase environment.

Synthetic self-assembly has long been recognized as an excellent approach for the formation of ordered structures on the nanoscale. Although the development of synthetic self-assembling materials has often been inspired by principles observed in nature (e.g., the assembly of lipids, DNA, proteins), until recently the self-assembly of synthetic molecules has mainly been investigated ex vivo. The past few years however, have witnessed the emergence of a research field in which synthetic, self-assembling systems are used that are capable of operating as bioactive materials in biological environments. Here, this up-and-coming field, which has the potential of becoming a key area in chemical biology and medicine, is reviewed. Two main categories of applications of self-assembly in biological environments are identified and discussed, namely therapeutic and imaging agents. Within these categories key concepts, such as triggers and molecular constraints for in vitro/in vivo self-assembly and the mode of interaction between the assemblies and the biological materials will be discussed.

Nonequilibrium transient self-assembly In biology, the constant supply of energy can drive a system to be far from its equilibrium conditions and allow for useful work to be done. In contrast, in most synthetic systems, there is a drive toward lower energy states. Boekhoven et al. made a molecule that can switch between a nonassociating state and an associating state through the addition of a chemical fuel (see the Perspective by Van der Zwagg and Meijer). The lifetime, stiffness, and regenerative behavior of the self-assembled state could be controlled and tuned by the kinetics of fuel conversion. Science , this issue p. 1075 ; see also p. 1056

Hydrogen bonds between urea units allow self-organization of π systems in mono- and bithiophenes into fibers as shown schematically. In these fibers there is a surprisingly high mobility of charge carriers as determined by pulse-radiolysis time-resolved microwave conductivity measurements.

A central paradigm in supramolecular chemistry is that one can design supramolecular devices and materials with a desired function, by programming the assembly properties of their molecular building blocks via molecular shape and intermolecular interactions. Therefore, over and over the question arose whether it would also be possible to design new supramolecular gels with tailor-made properties, by following guidelines and principles of supramolecular chemistry. In this chapter we discuss the principles, prospects, and limitations of the various approaches towards the design of supramolecular gels: (i) property-based design, (ii) library and selection approaches for the discovery of new gelators, (iii) structure-based design, and (iv) gelator scaffolds as starting point for functional gelators.

It is generally believed that surfactant-free emulsion polymerization involves four steps: initiation, nucleation into primary particles, coagulation into secondary particles, and growth. By high resolution SEM-imaging of the intermediate polymerization products, the evolution of the morphology of the polymer particles has been followed. This allowed us, to our best knowledge for the first time, to visualize “coagulative nucleation”, which is the process where the primary nanoparticles aggregate into larger entities. The obtained visual information and data on particle size, number, and zeta potential, strongly suggest that coagulative termination is responsible for the coagulative nucleation phenomenon, resulting in a dispersion of fine, relatively uniform polymer particles.

This paper studies the Rayleigh-Plateau instability for co-flowing immiscible aqueous polymer solutions in a microfluidic channel. Careful vibration-free experiments with controlled actuation of the flow allowed direct measurement of the growth rate of this instability. Experiments for the well-known aqueous two phase system (ATPS, or aqueous biphasic systems) of dextran and polyethylene glycol solutions exhibited a growth rate of 1 s(-1), which was more than an order of magnitude slower than an analogous experiment with two immiscible Newtonian fluids with viscosities and interfacial tension that closely matched the ATPS experiment. Viscoelastic effects and adhesion to the walls were ruled out as explanations for the observed behavior. The results are remarkable because all current theory suggests that such dilute polymer solutions should break up faster, not slower, than the analogous Newtonian case. Microfluidic uses of aqueous two phase systems include separation of labile biomolecules but have hitherto be limited because of the difficulty in making droplets. The results of this work teach how to design devices for biological microfluidic ATPS platforms.

We have investigated charge transport in ZnTPPdT–Pyr (TPPdT: 5,15-di(p-thiolphenyl)-10,20-di(p-tolyl)porphyrin) molecular junctions using the lithographic mechanically controllable break-junction (MCBJ) technique at room temperature and cryogenic temperature (6 K). We combined low-bias statistical measurements with spectroscopy of the molecular levels in the form of I(V) characteristics. This combination allows us to characterize the transport in a molecular junction in detail. This complex molecule can form different junction configurations, having an observable effect on the trace histograms and the current–voltage (I(V)) measurements. Both methods show that multiple, stable single-molecule junction configurations can be obtained by modulating the interelectrode distance. In addition we demonstrate that different ZnTPPdT–Pyr junction configurations can lead to completely different spectroscopic features with the same conductance values. We show that statistical low-bias conductance measurements should be interpreted with care, and that the combination with I(V) spectroscopy represents an essential tool for a more detailed characterization of the charge transport in a single molecule.

We demonstrate a rapid fabrication procedure for solvent-resistant microfluidic devices based on the perfluoropolyether (PFPE) SIFEL. We carefully modified the poly-dimethylsiloxane (PDMS) micromolding procedure, such that it can still be executed using the standard facilities for PDMS devices. Most importantly, devices with a thin SIFEL layer for the patterned channels and a PDMS support layer on top offered the best of two worlds in terms of chemical and mechanical stability during fabrication and use. Tests revealed that these devices overcome two important drawbacks of PDMS devices: (i) incompatibility with almost all non-aqueous solvents, and (ii) leaching of oligomer into solution. The potential of our device is shown by performing a relevant organic synthesis reaction with aggressive reactants and solvents. PFPE-PDMS devices will greatly expand the application window of micromolded devices.

Interpenetrating networks (IPN) consist of two or more networks of different components which are entangled on a molecular scale and cannot be separated without breaking at least one of the networks. They are of great technological interest because they allow the blending of two or more otherwise incompatible properties or functions, and furthermore synergistic effects might arise from the simultaneous operation of the two networks. So far, the preparation of interpenetrating network gels by self-assembly approaches was doomed to fail because the conventional polymers and surfactant building blocks either phase separate or form mixed assemblies, respectively. Here we report on self-assembled interpenetrating networks obtained by the orthogonal self-assembly of small molecular hydrogelators and surfactants. Preliminary studies on the self-assembly behaviour and viscoelastic properties of these systems revealed that these self-assembled IPN have a number of intriguing properties. For instance, the presence of two coexisting networks offers new possibilities for compartmentalization, and will allow one to adjust the viscoelastic properties between 'soft' and 'hard' gels. The non-covalent character of such IPN makes their formation fully reversible, which can be exploited for dual responsive systems. Most interestingly, self-assembled IPN can also act as a very primitive, yet unique, model for biological interpenetrating networks like the extracellular matrix and the cytoskeleton, and thereby contribute to our understanding of these very complex systems.

Newly developed conjugated terthiophene surfactants are able to aggregate in water and to act as a host for hydrophobic chromophores, creating a multiple donor-acceptor energy transfer (ET) system by self-assembly.

We present a microfluidic method to compartmentalize aqueous polymer solutions within water-in-water microdroplets, which are continuously generated without using organic solvents or surfactants. Phase separation inside the drops yields all-aqueous core-shell structures (water-in-water-in-water), as we demonstrate using the aqueous two phase system of polyethylene glycol and dextran.