Search

We report the first experimental characterizations of the coupling efficiencies of a series of e-beam fabricated focusing non-uniform grating couplers interfaced with a horizontal fiber coupling-scheme and designed for multiple Silicon-On-Insulator thicknesses, spanning between the 220 and 340 nm standard platforms. The design of nonuniform grating couplers is tackled either from an engineering perspective focused on to the optimization of the structures for this particular coupling-scheme; and a physics perspective related to the investigation of the scattering process of each structure for a complete comprehension of its performance in support to the experimental findings. Measured coupling efficiencies, up to 83% for the 340 nm platform at 1550 nm, are reported showing to be in excellent agreement with the theoretical findings. The physics behind the scattering process of each structure is investigated taking advantage of the Finite Difference Time Domain method to obtain a deeper understating of the coupling efficiencies. Consequently, a new parameter, the integrated leakage factor, together with the variation of the effective refractive index, across the local pitches, are calculated. Our belief is that any coupling structure for grating coupling can benefit from the proposed designed approach, as a widely applicable technique.

In this work we experimentally demonstrate a fully packaged one-dimensional beam steering system that is based on a fully CMOS compatible silicon photonics platform. This configuration enables multi-wavelength operation and is suitable for short-wavelength infrared (SWIR) applications from light detection and ranging (LIDAR) to telecommunication and sensing applications. The switching fabric in this system employs a 1x9 array of add/drop ring resonators that are fed by a common waveguide through a single etch input grating. The switching fabric re-directs the resonance wavelengths at each drop waveguide to the output facet at the edge of the chip and into free space. The divergent beams that exit the waveguides along the output facet are then collimated and magnified using an array of micro-lenses (pitch = 750 μm, Diameter = 700 μm) in addition to a two lens afocal system in order to enhance the fill factor and diminish any blind zones between adjacent beams. Each one of these drop waveguides is used to address portion of the steering aperture. Combined together they enable steering across the entire aperture. Multi-wavelength operation is obtained by placing individual titanium tungsten alloy (TiW) heaters on top of each ring resonator to enable wavelength tuning.

Recent advances in the nanofabrication and modeling of metasurfaces have shown the potential of these systems in providing unprecedented control over light–matter interactions at the nanoscale, enabling immediate and tangible improvement of features and specifications of photonic devices that are becoming always more crucial in enhancing everyday life quality. In this work, we theoretically demonstrate that metasurfaces made of periodic and non-periodic deterministic assemblies of vertically aligned semiconductor nanowires can be engineered to display a tailored effective optical response and provide a suitable route to realize advanced systems with controlled photonic properties particularly interesting for sensing applications. The metasurfaces investigated in this paper correspond to nanowire arrays that can be experimentally realized exploiting nanolithography and bottom-up nanowire growth methods: the combination of these techniques allow to finely control the position and the physical properties of each individual nanowire in complex arrays. By resorting to numerical simulations, we address the near- and far-field behavior of a nanowire ensemble and we show that the controlled design and arrangement of the nanowires on the substrate may introduce unprecedented oscillations of light reflectance, yielding a metasurface which displays an electromagnetic behavior with great potential for sensing. Finite-difference time-domain numerical simulations are carried out to tailor the nanostructure parameters and systematically engineer the optical response in the VIS-NIR spectral range. By exploiting our computational-methods we set-up a complete procedure to design and test metasurfaces able to behave as functional sensors. These results are especially encouraging in the perspective of developing arrays of epitaxially grown semiconductor nanowires, where the suggested design can be easily implemented during the nanostructure growth, opening the way to fully engineered nanowire-based optical metamaterials.

Fluorescence spectroscopy has been extensively investigated for disease diagnosis. In this framework, optical tissue phantoms are widely used for validating the biomedical device system in a laboratory environment outside of clinical procedures. Moreover, it is fundamental to consider that there are several scattering components and chromophores inside biological tissues and the interplay between scattering and absorption may result in a distortion of the emitted fluorescent signal. In this work, the photophysical behaviour of a set of liquid, tissue-like phantoms containing different compositions was analysed: phosphate buffer saline (PBS) was used as the background medium, low fat milk as a scatterer, Indian ink as an absorber and protoporphyrin IX (PpIX) dissolved in dimethyl formamide (DMF) as a fluorophore. We examined the collected data in terms of the impact of surfactant Tween-20 on the background medium, scattering effects and combination of scattering and absorption within a luminescent body on PpIX. The results indicated that the intrinsic emission peaks are red shifted by the scattering particles or surfactant, whilst the scattering agent and the absorbent can alter the emission intensity substantially. We corroborated that phantoms containing higher surfactant content (>0.5% Tween 20) are essential to prepare stable aqueous phantoms.

Metasurfaces made of arrays of vertically aligned semiconductor nanowires are suitable platforms for light management in optical and photonic applications. Here we report a design approach aimed at engineering the optical behavior of semiconductor nanowire ensembles randomly displaced on the substrate, in order to enhance modulation effects in their optical reflectance response. By resorting to analytical and numerical simulations we demonstrate that the combined implementation of a multi-shell layering together with a tapered designing on the individual nanowire offer new opportunities to tailor the optical reflectance oscillations in this kind of architectures. The simulation insights were compared to experimental results reported for self-assembled GaAs nanowires and GaAs/AlGaAs core-shell nanowires. The proposed approach is especially promising for epitaxially grown semiconductor nanowires, where the suggested design modifications can be easily implemented during the nanostructure growth.

Fluorescence spectroscopy has been extensively investigated for disease diagnosis. In this framework, optical tissue phantoms are widely used for validating the biomedical device system in laboratory environment outside clinical procedures. Moreover, it is fundamental to consider that there are several scattering components and chromophores inside biological tissues and the interplay between scattering effects and absorption can result in a distortion of the emitted fluorescence signal. In this work, the photophysical behaviour of a set of liquid tissue like phantoms containing different compositions was analysed: phosphate buffer saline (PBS) was used as background medium, low fat milk as a scatterer, India ink as an absorber and PpIX dissolved in dimethyl formamide (DMF) as fluorophore. We examined the collected data in terms of the impact of surfactant Tween-20 on the background medium, scattering effects and combination of scattering and absorption within a luminescent body on PpIX. The results indicated that the intrinsic emission peaks are red-shifted by the scattering particles or surfactant, whilst the scatterer and absorber can alter the emission intensity substantially. We corroborated that phantoms containing higher surfactant content (< 0.5% Tween 20) are essential to prepare a stable aqueous phantoms.

Random assemblies of vertically aligned core&ndash, shell GaAs&ndash, AlGaAs nanowires displayed an optical response dominated by strong oscillations of the reflected light as a function of the incident angle. In particular, angle-resolved specular reflectance measurements showed the occurrence of periodic modulations in the polarization-resolved spectra of reflected light for a surprisingly wide range of incident angles. Numerical simulations allowed for identifying the geometrical features of the core&ndash, shell nanowires leading to the observed oscillatory effects in terms of core and shell thickness as well as the tapering of the nanostructure. The present results indicate that randomly displaced ensembles of nanoscale heterostructures made of III&ndash, V semiconductors can operate as optical metamirrors, with potential for sensing applications.

We compare the simulated optical insertion-losses and fabrication-tolerances of a micro-optical bench (MOB) for laser hybrid-integration on the 220nm Silicon-on-Insulator (SOI) photonic-platform to standard fiber-to-grating coupling. Our millimeter-scale two-dimensional finite difference time domain (2D-FDTD) simulation captures (i) aberration, (ii) reflection, (iii) diffraction, and (iv) wave-guiding effects in a single-shot and completely self-consistent way, indicating that light from a laser-diode can be coupled to the SOI photonic integrated circuit (PIC) with a 2.8dB insertion-loss at 1550nm. This insertion loss is just 1.0dB higher than for a standard Fiber-to-PIC grating-coupler, and is due to a combination of interface-reflections and aberration-effects from the micro-optical elements in the MOB. We use further 2D-FDTD simulations to investigate the alignment and manufacturing tolerances of the MOB, and show that these are compatible with practical photonic-packaging processes for mass-manufacture.

Subwavelength nanostructured surfaces are realized with self-assembled vertically-aligned InAs nanowires, and their functionalities as optical reflectors are investigated. In our system, polarization-resolved specular reflectance displays strong modulations as a function of incident photon energy and angle. An effective-medium model allows one to rationalize the experimental findings in the long wavelength regime, whereas numerical simulations fully reproduce the experimental outcomes in the entire frequency range. The impact of the refractive index of the medium surrounding the nanostructure assembly on the reflectance was estimated. In view of the present results, sensing schemes compatible with microfluidic technologies and routes to innovative nanowire-based optical elements are discussed.

Grating couplers are widely used optical interfaces in integrated photonics, especially on the Silicon-On-Insulator (SOI) platform. Their design has been optimized for coupling light between a Photonic Integrated Circuit (PIC) and a single-mode fiber, a µlens for free space transport, or even a second PIC in the same SOI platform. In this work, we co-design matching pairs of grating-couplers on distinct SOI and InP photonic platforms for optimized PIC-to-PIC coupling. By matching the scattering strengths of the two grating-couplers, we show that a PIC-to-PIC insertion loss of 3dB can be achieved. We also investigate how the design parameters impact the coupling efficiency and the bandwidth, ending up with a tolerance analysis. The proposed coupling approach between two different waveguide materials has prospective applications for the hybrid-integration of SOI and InP photonic platforms for communication technologies.

An all-polymer photonic structure constituted by a distributed Bragg reflector topped with an ultrathin fluorescent polymer film has been studied. A Bloch surface wave resonance has been exploited to improve pumping efficiency. A strongly polarization and angle dependent fluorescence signal is found with respect to the light pumping beam and the emitted wavelength. Matching the most favorable condition for the pump coupling and the collection geometry, the signal obtained from the structure appears to be two orders of magnitude larger than the one of the bare emitting film.

Ultrathin films of silica realized by sol-gel synthesis and dip-coating techniques were successfully applied to predefined metal/polymer plasmonic nanostructures to spectrally tune their resonance modes and to increase their sensitivity to local refractive index changes. Plasmon resonance spectral shifts up to 100 nm with slope efficiencies of ∼8 nm/nm for increasing layer thickness were attained. In the ultrathin layer regime (

The development of a new surface plasmon resonance (SPR) imaging biosensor is reported. The biosensor exploits the optical properties of a nano-structured gold-polymer chip, which allows for the coupling of the SPR with the incident light. The spectral characterization of the chip permits to analyze the plasmonic response to a refractive index change near its free surface. The nano-structured surface features are presented together with an exemplifying biological tests which demonstrate the multiplexing label-free detection capability of the proposed device.

Biosensing technologies based on plasmonic nanostructures have recently attracted significant attention due to their small dimensions, low-cost and high sensitivity but are often limited in terms of affinity, selectivity and stability. Consequently, several methods have been employed to functionalize plasmonic surfaces used for detection in order to increase their stability. Herein, a plasmonic surface was modified through a controlled, silica platform, which enables the improvement of the plasmonic-based sensor functionality. The key processing parameters that allow for the fine-tuning of the silica layer thickness on the plasmonic structure were studied. Control of the silica coating thickness was achieved through a combined approach involving sol–gel and dip-coating techniques. The silica films were characterized using spectroscopic ellipsometry, contact angle measurements, atomic force microscopy and dispersive spectroscopy. The effect of the use of silica layers on the optical properties of the plasmonic structures was evaluated. The obtained results show that the silica coating enables surface protection of the plasmonic structures, preserving their stability for an extended time and inducing a suitable reduction of the regeneration time of the chip.

Plasmonics has recently received considerable interest due to its potentiality in many fields as well as in nanobio-technology applications. In this regard, various strategies are required for modifying the surfaces of plasmonic nanostructures and to control their optical properties in view of interesting application such as bio-sensing, We report a simple method for depositing silica layers of controlled thickness on planar plasmonic structures. Tetraethoxysilane (TEOS) was used as silica precursor. The control of the silica layer thickness was obtained by optimizing the sol-gel method and dip-coating technique, in particular by properly tuning different parameters such as pH, solvent concentration, and withdrawal speed. The resulting films were characterized via atomic force microscopy (AFM), Fourier-transform (FT) spectroscopy, and spectroscopic ellipsometry (SE). Furthermore, by performing the analysis of surface plasmon resonances before and after the coating of the nanostructures, it was observed that the position of the resonance structures could be properly shifted by finely controlling the silica layer thickness. The effect of silica coating was assessed also in view of sensing applications, due to important advantages, such as surface protection of the plasmonic structure.

We report on the development of a plasmonic-photonic coupled platform based on a plasmonic periodic nanostructure and a host matrix for active media in the visible-near infrared range, constituted by a thin film of sol-gel glass. Here, we report on preliminary results about two main tasks of the research work. On one side, we have studied and optimized the surface that supports plasmonic resonances with tunable wavelengths. On the other side, we focused on improving the sol-gel techniques to form and deposit thin films appropriate for covering the previous surface as well as to protect it (i.e. for sensing applications), embed suitable fluorophores (for active device applications) while avoiding metal-induced radiative emission quenching. Besides structural and optical characterization of the considered structures and films, finite-difference time-domain numerical simulations have been performed, in order to give a feedback on the structure features and thereby interpret its optical response.

We report successful tuning of laser wavelength from ∼420 nm to ∼600 nm in epitaxially aligned nanofibers grown by periodic deposition of para-sexiphenyl (p6P) and sexithiophene (6T) on p-6P/muscovite mica templates. The nanofibers were photoexcited by subpicosecond pulses tuned to the lowest p6P absorption band, and the emission of 6T, whose coverage was kept in the submonolayer regime, was efficiently sensitized through resonance energy transfer (RET).The 6T lasing was achieved at room temperature with threshold fluences as low as 10 μJ/cm2 per pulse. Transient photoluminescence measurements, with picosecond resolution, showed that at these pump fluences the decay dynamics of 6T emission is independent of the excitation density, thereby demonstrating the attainment of room-temperature monomolecular lasing from epitaxially oriented 6T submonolayer aggregates. Main lasing properties remained unaltered upon direct photoexcitation of 6T below the p6P absorption edge.

We report on the study of a plasmonic nanostructure that could be adopted as platform for emitting and sensing applications. Several devices have been prepared and characterized by atomic force microscopy (AFM) and Fourier transform micro-reflectance (FT- pR) techniques. In addition, a modelling via finite-difference time-domain (FDTD) simulations have been developed in order to interpret the morphological shape and the optical response of the considered structures. Until now, remarkable performances as surface plasmon resonance (SPR) based optical sensor have been founded. Moreover, we are performing preliminary trials in order to establish a coupling between photoluminescence (PL) features of suitable emitters with respect to the plasmonic resonances.