Search

Fine control over the mechanical properties of thin sheets underpins transcytosis, cell shape, and morphogenesis. Applying these principles to artificial, liquid-based systems has led to reconfigurable materials for soft robotics, actuation, and chemical synthesis. However, progress is limited by a lack of synthetic two-dimensional membranes that exhibit tunable mechanical properties over a comparable range to that seen in nature. Here, we show that the bending modulus, B, of thin assemblies of nanoparticle surfactants (NPSs) at the oil-water interface can be varied continuously from sub-kBT to 106kBT, by varying the ligands and particles that comprise the NPS. We find extensive departure from continuum behavior, including enormous mechanical anisotropy and a power law relation between B and the buckling spectrum width. Our findings provide a platform for shape-changing liquid devices and motivate new theories for the description of thin-film wrinkling.

To understand and control the behavior of electrochemical systems, including batteries and electrocatalysts, we seek molecular-level details of the charge transfer mechanisms at electrified interfaces. Recognizing some key limitations of standard equilibrium electronic structure methods to model materials and their interfaces, we propose applying charge constraints to effectively separate electronic and nuclear degrees of freedom, which are especially beneficial to the study of conversion electrodes, where electronic charge carriers are converted to much slower polarons within a material that is nonmetallic. We demonstrate the need for such an approach within the context of sulfur cathodes and the arrival of Li ions during discharge of a Li-S cell. The requirement that electronic degrees of freedom are arrested is justified by comparison with real-time evolution of the electronic structure. Long-lived metastable configurations provide plenty of time for nuclear dynamics and relaxation in response to the electrification of the interface, a process that would be completely missed without applying charge constraints. This approach will be vital to the study of dynamics at electrified interfaces which may be created deliberately, adding charge to the electrode, or spontaneously, due to finite temperature dynamics in the electrolyte.

Plasmonic metal oxide nanocrystals are interesting electrochromic materials because they display high modulation of infrared light, fast switching kinetics, and durability. Nanocrystals facilitate ...

The self-assembly of nanoscale materials at the liquid-liquid interface allows for fabrication of three-dimensionally structured liquids with nearly arbitrary geometries and tailored electronic, optical, and magnetic properties. Two-dimensional (2D) materials are highly anisotropic, with thicknesses on the order of a nanometer and lateral dimensions upward of hundreds of nanometers to micrometers. Controlling the assembly of these materials has direct implications for their properties and performance. We here describe the interfacial assembly and jamming of Ti3C2Tx MXene nanosheets at the oil-water interface. Planar, as well as complex, programmed three-dimensional all-liquid objects are realized. Our approach presents potential for the creation of all-liquid 3D-printed devices for possible applications in all-liquid electrochemical and energy storage devices and electrically active, all-liquid fluidics that exploits the versatile structure, functionality, and reconfigurability of liquids.

Liquid reconfigurable ferromagnetic materials Ferromagnetic materials show a permanent magnetic dipole, whereas superparamagnetic ones only show magnetic properties under an applied field. Some materials, like ferrofluids, show liquid-like behavior but do not retain their magnetization in the absence of an applied field. Liu et al. show remnant magnetization of otherwise superparamagnetic magnetite nanoparticles at an oil-water interface of emulsion droplets (see the Perspective by Dreyfus). The permanent magnetization could be controlled by coupling and uncoupling the magnetization of individual nanoparticles, making it possible to “write and erase” shapes of the droplets or to elongate them into cylinders. Science , this issue p. 264 ; see also p. 219

Here we describe structured liquid batteries, whose membranes self-form via coacervation of polyelectrolytes. The membrane serves as an ion conductor, a physical barrier, and a structural support. Complexation of redox-active small molecules with their complementary polyelectrolyte also mitigates the crossover. The reconfigurability of liquids allows the cell to conform to prescribed patterns and the cells are rechargeable for hundreds of hours.

While not yet competitive with commodity polymers, PDKs are recycled to monomer at lower cost and emissions than virgin resins., Mechanical recycling of polymers downgrades them such that they are unusable after a few cycles. Alternatively, chemical recycling to monomer offers a means to recover the embodied chemical feedstocks for remanufacturing. However, only a limited number of commodity polymers may be chemically recycled, and the processes remain resource intensive. We use systems analysis to quantify the costs and life-cycle carbon footprints of virgin and chemically recycled polydiketoenamines (PDKs), next-generation polymers that depolymerize under ambient conditions in strong acid. The cost of producing virgin PDK resin using unoptimized processes is ~30-fold higher than recycling them, and the cost of recycled PDK resin ($1.5 kg−1) is on par with PET and HDPE, and below that of polyurethanes. Virgin resin production is carbon intensive (86 kg CO2e kg−1), while chemical recycling emits only 2 kg CO2e kg−1. This cost and emissions disparity provides a strong incentive to recover and recycle future polymer waste.

Footwear, carpet, soft furnishings, automotive interiors, and multi-layer packaging are examples of products manufactured from several types of polymers whose inextricability poses significant challenges for recycling at end-of-life. Here, we show that chemical circularity in mixed-polymer recycling becomes possible by controlling the rates of depolymerization of polydiketoenamines (PDKs) over several orders of magnitude through molecular engineering. Stepwise deconstruction of mixed-PDK composites, laminates, and assemblies is chemospecific, allowing a prescribed subset of monomers, fillers, and additives to be recovered in pristine condition at each stage of the recycling process. We provide a theoretical framework to understand PDK depolymerization via acid-catalyzed hydrolysis and experimentally validate trends predicted for the rate-limiting step. The control achieved by PDKs in managing thermal and materials entropy points to new opportunities for pairing circular design with sustainable manufacturing.

Microemulsions, mixtures of oil, water, and surfactant, are thermodynamically stable. Unlike conventional emulsions, microemulsions form spontaneously, have a monodisperse droplet size that can be controlled by adjusting the surfactant concentration, and do not degrade with time. To make microemulsions, a judicious choice of surfactant molecules must be made, which significantly limits their potential use. Nanoparticle surfactants, on the other hand, are a promising alternative because the surface chemistry needed to make them bind to a liquid–liquid interface is both well flexible and understood. Here, we derive a thermodynamic model predicting the conditions in which nanoparticle surfactants drive spontaneous emulsification that agrees quantitatively with experiments using Noria nanoparticles. This new class of microemulsions inherits the mechanical, chemical, and optical properties of the nanoparticles used to form them, leading to novel applications.

Direct observation of nanoparticle adsorption to the water-oil interface captures early attachment and jamming., Electrostatic interactions between nanoparticles (NPs) and functionalized ligands lead to the formation of NP surfactants (NPSs) that assemble at the water-oil interface and form jammed structures. To understand the interfacial behavior of NPSs, it is necessary to understand the mechanism by which the NPSs attach to the interface and how this attachment depends on the areal coverage of the interface. Through direct observation with high spatial and temporal resolution, using laser scanning confocal microscopy and in situ atomic force microscopy (AFM), we observe that early-stage attachment of NPs to the interface is diffusion limited and with increasing areal density of the NPSs, further attachment requires cooperative displacement of the previously assembled NPSs both laterally and vertically. The unprecedented detail provided by in situ AFM reveals the complex mechanism of attachment and the deeply nonequilibrium nature of the assembly.

Dendrite formation during electrodeposition while charging lithium metal batteries compromises their safety. Although high-shear-modulus (Gs) solid-ion conductors (SICs) have been prioritized to resolve the pressure-driven instabilities that lead to dendrite propagation and cell shorting, it is unclear whether these or alternatives are needed to guide uniform lithium electrodeposition, which is intrinsically density-driven. Here, we show that SICs can be designed within a universal chemomechanical paradigm to access either pressure-driven dendrite-blocking or density-driven dendrite-suppressing properties, but not both. This dichotomy reflects the competing influence of the SIC's mechanical properties and the partial molar volume of Li+ ([Formula: see text]) relative to those of the lithium anode (GLi and VLi) on plating outcomes. Within this paradigm, we explore SICs in a previously unrecognized dendrite-suppressing regime that are concomitantly 'soft', as is typical of polymer electrolytes, but feature an atypically low [Formula: see text] that is more reminiscent of 'hard' ceramics. Li plating (1 mA cm-2; T = 20 °C) mediated by these SICs is uniform, as revealed using synchrotron hard X-ray microtomography. As a result, cell cycle life is extended, even when assembled with thin Li anodes (~30 µm) and either high-voltage NMC-622 cathodes (1.44 mAh cm-2) or high-capacity sulfur cathodes (3.02 mAh cm-2).

Author(s): Nugent, P; Prendergast, D | Abstract: We employed ab-initio simulations and quantum chemical calculations to develop a computational framework for simulating the microscopic structure and mechanical properties of novel polymer membranes used in lithium sulfur batteries. To meet industry targets, next generation batteries with high specific energy (Wh/kg) are essential. Efforts to commercialize light-weight, energy-dense lithium-sulfur secondary batteries (2510 Wh/kg) have been stalled by ongoing problems with the battery’s separator membrane, which should prevent cross-over of active material from cathode to anode that, if unchecked, limits cycle-life. However, Sepion Technologies’ polymer membranes yield long-lasting lithium-sulfur cells. Advancing to 10 Ah battery prototypes, Sepion faces challenges in membrane manufacturing related to polymer processing and the molecular basis for membrane performance and durability. High performance computing offers critical new insight into these phenomena, which in turn will accelerate product entry into the market.

To suppress dendrite formation in lithium metal batteries, high cation transference number electrolytes that reduce electrode polarization are highly desirable, but rarely available using conventional liquid electrolytes. Here, we show that liquid electrolytes increase their cation transference numbers (e.g., ∼0.2 to >0.70) when confined to a structurally rigid polymer host whose pores are on a similar length scale (0.5-2 nm) as the Debye screening length in the electrolyte, which results in a diffuse electrolyte double layer at the polymer-electrolyte interface that retains counterions and reject co-ions from the electrolyte due to their larger size. Lithium anodes coated with ∼1 μm thick overlayers of the polymer host exhibit both a low area-specific resistance and clear dendrite-suppressing character, as evident from their performance in Li-Li and Li-Cu cells as well as in post-mortem analysis of the anode's morphology after cycling. High areal capacity Li-S cells (4.9 mg cm-2; 8.2 mAh cm-2) implementing these high transference number polymer-hosted liquid electrolytes were remarkably stable, considering ∼24 μm of lithium was electroreversibly deposited in each cycle at a C-rate of 0.2. We further identified a scalable manufacturing path for these polymer-coated lithium electrodes, which are drop-in components for lithium metal battery manufacturing.

Natural and man-made robotic systems use the interfacial tension between two fluids to support dense objects on liquid surfaces. Here, we show that coacervate-encased droplets of an aqueous polymer solution can be hung from the surface of a less dense aqueous polymer solution using surface tension. The forces acting on and the shapes of the hanging droplets can be controlled. Sacs with homogeneous and heterogeneous surfaces are hung from the surface and, by capillary forces, form well-ordered arrays. Locomotion and rotation can be achieved by embedding magnetic microparticles within the assemblies. Direct contact of the droplet with air enables in situ manipulation and compartmentalized cascading chemical reactions with selective transport. Applications including functional microreactors, motors, and biomimetic robots are evident.

Batteries assembled with lithium metal anodes and high-capacity cathodes—including air, sulfur, and lithium-rich transition metal oxides—have higher energy density than conventional Li-ion counterparts. Unfortunately, the lifetime of lithium metal cells is typically short, owing to the formation of dendrites on charging, which eventually shorts the cells. Short cycle life is also observed when lithium deposits with a “mossy” morphology; the high surface area of mossy deposits increases the rate of electrolyte degradation, eventually drying out the cells. Here we show that a lithium-ion-conducting, architected macroporous polyelectrolyte (AMP-1) serves as a long-lasting host for uniform and dense lithium–metal electrodeposits. High Coulombic efficiencies indicate the low occurrence of parasitic reactions with the electrolyte. Galvanostatic discharge experiments indicate that AMP-1 suppresses dendrite formation, extending over 2-fold the short-circuit time at high current density. Our success opens new dire...

Interfacial assemblies of nanoparticles can stabilize liquid-liquid interfaces. Due to the interactions between functional groups on nanoparticles dispersed in one liquid and polymers having complementary end-functionality dissolved in a second immiscible fluid, the anchoring of a well-defined number of polymer chains onto the nanoparticles leads to the formation of NP-surfactants that assemble at the interface and reduce the interfacial energy. We have developed droplet interfaces covered with elastic, responsive monolayers of NP-surfactants. Due to the presence of an elastic layer at the interface, the droplets offer a greater resistance to coalescence and can prevent the exchange of materials across interfaces. Our results show the successful encapsulation of nanoparticles, dyes, and proteins with diameters in the 2.4-30 nm range. Further, we show that stable water-in-oil droplets can be generated for various combinations of polymer ligands and nanoparticles bearing complementary functionalities. These NP-surfactant-stabilized microfluidic emulsions would enable applications requiring liquid-liquid interfaces that can adapt and respond to external stimuli and whose mechanical properties can be easily tailored.

Polymer binders in battery electrodes may be either active or passive. This distinction depends on whether the polymer influences charge or mass transport in the electrode. Although it is desirable to understand how to tailor the macromolecular design of a polymer to play a passive or active role, design rules are still lacking, as is a framework to assess the divergence in such behaviors. Here, we reveal the molecular-level underpinnings that distinguish an active polyelectrolyte binder designed for lithium-sulfur batteries from a passive alternative. The binder, a cationic polyelectrolyte, is shown to both facilitate lithium-ion transport through its reconfigurable network of mobile anions and restrict polysulfide diffusion from mesoporous carbon hosts by anion metathesis, which we show is selective for higher oligomers. These attributes allow cells to be operated for >100 cycles with excellent rate capability using cathodes with areal sulfur loadings up to 8.1 mg cm[superscript -2]., United States. Department of Energy. Office of Basic Energy Sciences (Joint Center for Energy Storage Research)

Despite the availability of chemistries to tailor the pore architectures of microporous polymer membranes for chemical separations, trade-offs in permeability and selectivity with functional group manipulations nevertheless persist, which ultimately places an upper bound on membrane performance. Here we introduce a new design strategy to uncouple these attributes of the membrane. Key to our success is the incorporation of phase-change metal-organic frameworks (MOFs) into the polymer matrix, which can be used to increase the solubility of a specific gas in the membrane, and thereby its permeability. We further show that it is necessary to scale the size of the phase-change MOF to nanoscopic dimensions, in order to take advantage of this effect in a gas separation. Our observation of an increase in solubility and permeability of only one of the gases during steady-state permeability measurements suggests fast exchange between free and chemisorbed gas molecules within the MOF pores. While the kinetics of this exchange in phase-change MOFs are not yet fully understood, their role in enhancing the efficacy and efficiency of the separation is clearly a compelling new direction for membrane technology.

© 2017 Macmillan Publishers Limited, part of Springer Nature. All rights reserved. Bicontinuous jammed emulsions (or bijels) are tortuous, interconnected structures of two immiscible liquids, kinetically trapped by colloidal particles that are irreversibly bound to the oil-water interface. A wealth of applications has been proposed for bijels in catalysis, energy storage and molecular encapsulation, but large domain sizes (on the order of 5 μm or larger) and difficulty in fabrication pose major barriers to their use. Here, we show that bijels with sub-micrometre domains can be formed via homogenization, rather than spinodal decomposition. We achieve this by using nanoparticle surfactants: polymers and nanoparticles of complementary functionality (for example, ion-pairing) that bind to one another at the oil-water interface. This allows the stabilization of the bijel far from the demixing point of the liquids, with interfacial tensions on the order of 20 mN m-1. Furthermore, our strategy is extremely versatile, as solvent, nanoparticle and ligand can all be varied.

The controlled structuring of liquids into arbitrary shapes can be achieved in biphasic liquid media using the interfacial assemblies of nanoparticle surfactants (NP-surfactants), that consist of a polar nanoparticle "head group" bound to one or more hydrophobic polymer "tails". The nonequilibrium shapes of the suspended liquid phase can be rendered permanent by the jamming of the NP-surfactants formed and assembled at the interface between the liquids as the system attempts to minimize the interfacial area between the liquids. While critical to the structuring process, little is known of the dynamic mechanical properties of the NP-surfactant monolayer at the interface as it is dictated by the characteristics of the component, including NP size and concentration and the molecular weight and concentration of polymers bound to the NPs. Here we provide the first comprehensive understanding of the dynamic mechanical character of two-dimensional NP-surfactant assemblies at liquid/liquid interfaces. Our results indicate that the dynamics of NP-polymer interactions are self-regulated across multiple time scales and are associated with specific mesoscale interactions between self-similar and cross-complementary components. Furthermore, the mechanical properties of the NP-surfactant monolayer are tunable over a broad range and deterministic on the basis of those component inputs. This control is key to tailoring the functional attributes of the reconfigurable structured liquids to suit specific applications.

Structured liquids, whose 3-D morphology can adapt and respond to external stimuli, represent a revolutionary materials platform for next-generation energy technologies, such as batteries, photovoltaics, and thermoelectrics. Structured liquids can be crafted by the jamming of interfacial assemblies of nanoparticle (NP) surfactants. Due to the interactions between functional groups on nanoparticles dispersed in one liquid and polymers having complementary end-functionality dissolved in a second immiscible fluid, the anchoring of a well-defined number of polymer chains onto the NPs leads to the formation of NP surfactants that assemble at the interface and reduce the interfacial energy. Microfluidic techniques provide a simple and versatile route to produce one liquid phase in a second where the shape of the dispersed liquid phase can range from droplets to tubules depending on the flow conditions and the interfacial energies. In this study, the effect of NP surfactants on Plateau-Rayleigh (PR) instabilities of a free-falling jet of an aqueous dispersion of carboxylic acid functionalized silica NPs into a toluene phase containing amine-terminated polydimethylsiloxane (PDMS-NH

Spinodal decomposition is not the only way to make a bijel. Indeed, while spinodal decomposition produces structures with a potentially useful morphology, it can be challenging to make bijels using this method and the resulting systems can be hard to process and manipulate. Furthermore, exploiting the functional properties of the assembled particle monolayer is extremely challenging. In this chapter, we show how the assembly of nanoparticle surfactants at the liquid–liquid interface can be used to kinetically trap liquids into a wealth of complex structures without using spinodal decomposition. We apply liquid three-dimensional printing and moulding methods, along with patterned substrates with controllable wetting properties, to build all-liquid devices with applications in chemical synthesis, separation, and purification. The functional properties of the assembled nanomaterials can be exploited to produce interfacially structured liquids that are plasmonically and magnetically responsive. Finally, we conclude by arguing that, while the field shows great promise, efforts need to be made to translate liquid bicontinuous systems out of the laboratory and into meaningful, real-world applications, as well applications in more ‘exotic’ disciplines, such as synthetic biology.

Control of equilibrium and non-equilibrium thermomechanical behavior of poly(diketoenamine) vitrimers is shown by incorporating linear polymer segments varying in molecular weight (MW) and conformational degrees of freedom into the dynamic covalent network. While increasing MW of linear segments yields a lower storage modulus at the rubbery plateau after softening above the glass transition (Tg ), both Tg and the characteristic time of stress relaxation are independently governed by the conformational entropy of the embodied linear segments. Activation energies for bond exchange in the solid state are lower for networks incorporating flexible chains; the network topology freezing temperature decreases with increasing MW of flexible linear segments but increases with increasing MW of stiff segments. Vitrimer reconfigurability is therefore influenced not only by the energetics of bond exchange for a given network density, but also the entropy of polymer chains within the network.

Here we describe the use of organo ionic phosphonium salts to access a broad range of useful binary and ternary (super)-concentrated liquid electrolytes for rechargeable magnesium batteries.

Amine-functionalized polyhedral oligomeric silsesquioxane (POSS), the smallest, monodisperse cage-shaped silica cubic nanoparticle, is exceptionally interfacially active and can form assemblies that jam the toluene/water interface, locking in non-equilibrium shapes of one liquid phase in another. The packing density of the amine-functionalized POSS assembly at the water/toluene interface can be tuned by varying the concentration, the pH value, and the degree of POSS functionalization. Functionalized POSS gives a higher interface coverage, and hence a lower interfacial tension, than nanoparticle surfactants formed by interactions between functionalized nanoparticles and polymeric ligands. Hydrogen-bonded POSS surfactants are more stable at the interface, offering some unique advantages for generating Pickering emulsions over typical micron-sized colloidal particles and ligand-stabilized nanoparticle surfactants.

Here we show how to control the thermomechanical behavior of vitrimers, both in and out of equilibrium, by incorporating into the dynamic covalent network linear polymer segments varying in both molecular weight (MW = 0–12 kg mol–1) and conformational degrees of freedom. While increasing MW of linear segments predictably yields a lower storage modulus (E’) at the rubbery plateau after softening above the glass transition (Tg), due to the lower network density, we further find that both Tg and the characteristic time (t*) of stress-relaxation when deformed are independently governed by the conformational entropy of the embodied linear segments. We also find that activation energies (Ea) for vitrimer bond exchange in the solid-state are lower, by as much as 19 kJ mol−1, for networks incorporating flexible chains, and that the network’s topology freezing temperature (Tv) decreases with increasing MW of flexible linear segments, but increases with increasing MW of stiff linear segments. Therefore, the dynamics of vitrimer reconfigurability are influenced not only by the energetics of associative bond exchange for a given network density, but also foundationally by the entropy of polymer chains within the network.

Systems comprised of immiscible liquids held in non-equilibrium shapes by the interfacial assembly and jamming of nanoparticle−polymer surfactants have significant potential to advance catalysis, chemical separations, energy storage and conversion. Spatially directing functionality within them and coupling processes in both phases remains a challenge. Here, we exploit nanoclay−polymer surfactant assemblies at an oil−water interface to produce a semi-permeable membrane between the liquids, and from them all-liquid fluidic devices with bespoke properties. Flow channels are fabricated using micropatterned 2D substrates and liquid-in-liquid 3D printing. The anionic walls of the device can be functionalized with cationic small molecules, enzymes, and colloidal nanocrystal catalysts. Multi-step chemical transformations can be conducted within the channels under flow, as can selective mass transport across the liquid−liquid interface for in-line separations. These all-liquid systems become automated using pumps, detectors, and control systems, revealing a latent ability for chemical logic and learning., Non-equilibrium systems of immiscible liquids have significant potential to advance different technologies, but control over morphology or functionality remains unexplored. Here, the authors demonstrate an all-liquid fluidic device by exploiting surfactant assemblies to produce a semi-permeable membrane between the liquids.

Nonaqueous redox flow batteries (NRFBs) are attractive devices for energy storage due to an increased potential window and the manifold possibilities they offer in terms of redox-active architectures and chemistries available for increasing energy density and battery performance. Our collaborations in the context of the Joint Center for Energy Storage Research (JCESR) have shown that pairing commercial nanoporous separators with redoxmer architectures[1] such as Redox-Active Polymers (RAPs),[2] Redox-Active Colloids (RACs),[3] and Redox-Active Oligomers (RAOs),[4] effectively prevent crossover of the active component within the flow system. The choice of redoxmer size and chemical makeup impact profoundly the electrochemical dynamics of the NRFB, and it is clear that optimal performance is only attained with a balanced pairing between redoxmer and separator membrane. In this presentation, I will discuss the design principles underlying size-exclusion NRFBs and some current directions on how nanoporous separators enable new strategies for long-term performance in the flow battery. I will highlight how the progression from high polymers to oligomers modifies the charge transfer characteristics of NRFB electrolytes and the implications of the dynamics of these redoxmer solutions on the size-exclusion approach.[5] Unlike small molecules, the electrochemical reactivity of solution-phase redoxmers is strongly modulated by the properties of both surface confined and freely diffusing species. Building from this knowledge, the recent introduction of Polymers of Intrinsic Microporosity (PIM) separators[4] into the NRFB scene area allows new opportunities in the design of redoxmers with improved charge transfer characteristics and diffusivity without sacrificing their size-exclusion performance. Finally, the use of a size-exclusion approach enables advanced concepts for long-term maintenance of a battery system. I will discuss recent results where controlled de-polymerization reactions are used for maintaining the state-of-health of NRFB components, highlighting the role of component separation using our strategy. Altogether, the combination of novel structural motifs and the use of new nanoporous materials, results in new directions to make better NRFBs that exploit the versatility of a new type of reacting redoxmer fluids for energy storage. References: [1] Acc. Chem. Res. 2016, 49, 2649. [2] J. Am. Chem. Soc. 2014, 136, 16309. [3] J. Am. Chem. Soc. 2016, 138, 13230. [4] Chem. Mater. 2018, 30, 3861. [5] J. Electrochem. Soc. 2017, 164, A1688.

The energy efficiency and cycle life of electrochemical cells with dissolved active materials are inextricably tied to the stability, conductivity, and transport selectivity of the cell's membrane. Membrane design rules have been lacking for such cells operating under harsh conditions, such as high alkalinity, due to the lack of selective, stable membranes. Here, we examined several classes of membranes for three aqueous Zn-based cell chemistries. In doing so, we uncovered a simple relationship between the membrane selectivity and the cell's cycle life, such that it is now possible to predict the lifetime of the cell on the basis of its membrane properties, thus avoiding time- or resource-intensive experimentation in large-format cells. Our work should greatly accelerate the identification of membranes for long-lasting, MW-scale redox-flow, and other low-cost grid batteries, which are required to last 10–20 years., United States. Department of Energy. Office of Basic Energy Sciences (Contract DE-AC02-05CH11231)

Liquid-fluid interfaces provide a platform both for structuring liquids into complex shapes and assembling dimensionally confined, functional nanomaterials. Historically, attention in this area has focused on simple emulsions and foams, in which surface-active materials such as surfactants or colloids stabilize structures against coalescence and alter the mechanical properties of the interface. In recent decades, however, a growing body of work has begun to demonstrate the full potential of the assembly of nanomaterials at liquid-fluid interfaces to generate functionally advanced, biomimetic systems. Here, a broad overview is given, from fundamentals to applications, of the use of liquid-fluid interfaces to generate complex, all-liquid devices with a myriad of potential applications.

A framework is presented to control phase transformations in colloidal nanocrystal assemblies at liquid-liquid interfaces., Mesostructured matter composed of colloidal nanocrystals in solidified architectures abounds with broadly tunable catalytic, magnetic, optoelectronic, and energy storing properties. Less common are liquid-like assemblies of colloidal nanocrystals in a condensed phase, which may have different energy transduction behaviors owing to their dynamic character. Limiting investigations into dynamic colloidal nanocrystal architectures is the lack of schemes to control or redirect the tendency of the system to solidify. We show how to solidify and subsequently reconfigure colloidal nanocrystal assemblies dimensionally confined to a liquid-liquid interface. Our success in this regard hinged on the development of competitive chemistries anchoring or releasing the nanocrystals to or from the interface. With these chemistries, it was possible to control the kinetic trajectory between quasi–two-dimensional jammed (solid-like) and unjammed (liquid-like) states. In future schemes, it may be possible to leverage this control to direct the formation or destruction of explicit physical pathways for energy carriers to migrate in the system in response to an external field.

The material demands for metal-organic frameworks (MOFs) for next-generation energy-efficient CO2 capture technologies necessitate advances in their expedient and scalable synthesis. Toward that end, the recently discovered expanded MOF-74, or M2(dobpdc), where M = divalent metal cation and dobpdc = 4,4′-dioxido-3,3′-biphenyldicarboxylate, can now be prepared in minutes via a controlled dissolution-crystallization route from divalent metal oxides as precursors. We show that the available surface area of the metal oxide plays a critical role in the precursor dissolution, which was found to be rate-limiting. Based on this understanding of the reaction trajectory, we pushed the chemical transformation to its fringe kinetic limit by configuring the metal oxide precursors as ligand-free colloidal metal oxide nanocrystals, which allowed MOF formation in less than 1 min. MOFs prepared by this strategy were highly crystalline, with BET surface areas on par with conventional multihour syntheses from metal halide salts. This method was also applied successfully in the synthesis of M2(dobdc) MOFs, highlighting its generality. Our work challenges the conventional wisdom that plurality of steps in MOF formation is inherently time-intensive.

Many next-generation batteries, including lithium–sulfur (Li–S) and redox-flow batteries, rely on robust and selective membranes to sustainably block the crossover of active species between the negative and positive electrodes. Preventing membrane degradation is essential for long-term battery operation. Nevertheless, challenges persist in understanding how to minimize the impact of chemical or structural changes in the membrane on its performance. Here we elucidate design rules for understanding and controlling the long-term polysulfide-blocking ability of size-selective polymer membranes cast from polymers of intrinsic microporosity (PIMs). PIM-1 membranes feature electrophilic 1,4-dicyanooxanthrene moieties that are shown to be susceptible to nucleophilic attack by lithium polysulfides, which are endogenous to lithium–sulfur batteries. Once transformed, the polymer chains reconfigure by swelling with additional electrolyte and the size-selective transport ability of the membrane is compromised. These undesirable, chemically-induced changes in membrane structure and selectivity were prevented by controllably cross-linking PIM-1. In doing so, low polysulfide crossover rates were sustained for >95 h, highlighting the critical role of macromolecular membrane design in the development of next-generation battery technologies.

Here we show that sub-micron coatings of zeolitic imidazolate frameworks (ZIFs) and even ZIF-ZIF bilayers can be grown directly on polymers of intrinsic microporosity from zinc oxide (ZnO) nanocrystal precursor films, yielding a new class of all-microporous layered hybrids. The ZnO-to-ZIF chemical transformation proceeded in less than 30 min under microwave conditions using a solution of the imidazole ligand in N,N-dimethylformamide (DMF), water, or mixtures thereof. By varying the ratio of DMF to water, it was possible to control the morphology of the ZIF-on-polymer from isolated crystallites to continuous films. Grazing incidence X-ray diffraction was used to confirm the presence of crystalline ZIF in the thin films, and X-ray absorption spectroscopy was used to quantify film purity, revealing films with little to no residual ZnO. The role solvent plays in the transformation mechanism is discussed in light of these findings, which suggest the ZnO nanocrystals may be necessary to localize heterogeneous nucleation of the ZIF to the polymer surface.

Redox flow batteries (RFBs) present unique opportunities for multi-hour electrochemical energy storage (EES) at low cost. Too often, the barrier for implementing them in large-scale EES is the unfettered migration of redox active species across the membrane, which shortens battery life and reduces Coulombic efficiency. To advance RFBs for reliable EES, a new paradigm for controlling membrane transport selectivity is needed. We show here that size- and ion-selective transport can be achieved using membranes fabricated from polymers of intrinsic microporosity (PIMs). As a proof-of-concept demonstration, a first-generation PIM membrane dramatically reduced polysulfide crossover (and shuttling at the anode) in lithium-sulfur batteries, even when sulfur cathodes were prepared as flowable energy-dense fluids. The design of our membrane platform was informed by molecular dynamics simulations of the solvated structures of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) vs lithiated polysulfides (Li2Sx, where x = 8, 6, and 4) in glyme-based electrolytes of different oligomer length. These simulations suggested polymer films with pore dimensions less than 1.2-1.7 nm might incur the desired ion-selectivity. Indeed, the polysulfide blocking ability of the PIM-1 membrane (∼0.8 nm pores) was improved 500-fold over mesoporous Celgard separators (∼17 nm pores). As a result, significantly improved battery performance was demonstrated, even in the absence of LiNO3 anode-protecting additives.

Electron transfer in complex aqueous systems can be observed remotely with single-electron sensitivity using locally dispersed nanostructures conferred with electronic charge concentration-dependent plasmonic properties. When introduced to a system out of redox equilibrium, tin-doped indium oxide nanocrystals undergo rapid multielectron transfer until redox equilibrium is reached; this modulates their free carrier concentration and plasmonic optical properties in the spectrally isolated near-infrared. This capability is harnessed here to noninvasively track, model, and quantify electron transfer events reversibly for organic, inorganic, biogenic, and even living cells.

The influence of segmental chain motion on the gas separation performance of thermally rearranged (TR) polymer membranes is established for TR polybenzoxazoles featuring Troger's base (TB) monomer subunits as exceptionally rigid sites of contortion along the polymer backbone. These polymers are accessed from solution-processable ortho-acetate functionalized polyimides, which are readily synthesized as high-molecular-weight polymers for membrane casting. We find that thermal rearrangement leads to a small increase in d-spacing between polymer chains and a dramatic pore-network reconfiguration that increases both membrane permeability and O2 /N2 selectivity, putting its performance above the 2015 upper bound.

Many forward-looking clean-energy technologies hinge on the development of scalable and efficient membrane-based separations. Ongoing investment in the basic research of microporous materials is beginning to pay dividends in membrane technology maturation. Specifically, improvements in membrane selectivity, permeability, and durability are being leveraged for more efficient carbon capture, desalination, and energy storage, and the market adoption of membranes in those areas appears to be on the horizon. Herein, an overview of the microporous materials chemistry driving advanced membrane development, the clean-energy separations employing them, and the theoretical underpinnings tying membrane performance to membrane structure across multiple length scales is provided. The interplay of pore architecture and chemistry for a given set of analytes emerges as a critical design consideration dictating mass transport outcomes. Opportunities and outstanding challenges in the field are also discussed, including high-flux 2D molecular-sieving membranes, phase-change adsorbents as performance-enhancing components in composite membranes, and the need for quantitative metrologies for understanding mass transport in heterophasic materials and in micropores with unusual chemical interactions with analytes of interest.

Selective ion transport across membranes is critical to the performance of many electrochemical energy storage devices. While design strategies enabling ion-selective transport are well-established, enhancements in membrane selectivity are made at the expense of ionic conductivity. To design membranes with both high selectivity and high ionic conductivity, there are cues to follow from biological systems, where regulated transport of ions across membranes is achieved by transmembrane proteins. The transport functions of these proteins are sensitive to their environment: physical or chemical perturbations to that environment are met with an adaptive response. Here we advance an analogous strategy for achieving adaptive ion transport in microporous polymer membranes. Along the polymer backbone are placed redox-active switches that are activated in situ, at a prescribed electrochemical potential, by the device’s active materials when they enter the membrane’s pore. This transformation has little influence on the membrane’s ionic conductivity; however, the active-material blocking ability of the membrane is enhanced. We show that when used in lithium–sulfur batteries, these membranes offer markedly improved capacity, efficiency, and cycle-life by sequestering polysulfides in the cathode. The origins and implications of this behavior are explored in detail and point to new opportunities for responsive membranes in battery technology development., The redox environment of an electrochemical cell chemically transforms the architecture of its membrane in situ, enhancing its ion-transport selectivity. The chemical potentials available for activation are informed by materials genomics screens.

Block copolymers serve as architecture-directing agents for the assembly of colloidal nanocrystals into a variety of mesoporous solids. Here we report the fundamental order-disorder transition in such assemblies, which yield, on one hand, ordered colloidal nanocrystals frameworks or, alternatively, disordered mesoporous nanocrystal films. Our determination of the order-disorder transition is based on extensive image analysis of films after thermal processing. The number of nearest-nanocrystal neighbours emerges as a critical parameter dictating assembly outcomes, which is in turn determined by the nanocrystal volume fraction (fNC). We also identify the minimum fNC needed to support the structure against collapse.

© 2016 American Chemical Society. π-Stacked perylene bisimide (PBI) molecules are implemented here as highly networked, redox-active supramolecular polymer binders in sulfur cathodes for lightweight and energy-dense Li-S batteries. We show that the in operando reduction and lithiation of these PBI binders sustainably reduces Li-S cell impedance relative to nonredox active conventional polymer binders. This lower impedance enables high-rate cycling in Li-S cells with excellent durability, a critical step toward unlocking the full potential of Li-S batteries for electric vehicles and aviation.

Colloidal inorganic nanocrystals are abound with magnetic, luminescent and plasmonic properties that are attractive for medical diagnostics and therapy. Our group, among others, have been interested in conferring nanocrystals, by design, with new capabilities that are not possible with conventional materials approaches. Two areas where the fruits of these efforts are paying dividends are in their implementation as in vivo imaging probes and as biosensors that dynamically respond to the local chemical or physical environment in cells and tissues. For applications in medical imaging, nanocrystal probes with unusual shapes are showing exceptional promise over existing technologies, while for environment-responsive probes, a hybrid approach involving tailored organic coatings is being implemented alongside the nanocrystals for the realization of dynamic, information-rich optical outputs.

Directed self-assembly (DSA) of block copolymers (BCPs), either by selective wetting of surface chemical prepatterns or by graphoepitaxial alignment with surface topography, has ushered in a new era for high-resolution nanopatterning. These pioneering approaches, while effective, require expensive and time-consuming lithographic patterning of each substrate to direct the assembly. To overcome this shortcoming, nanoimprint molds--attainable via low-cost optical lithography--were investigated for their potential to be reusable and efficiently template the assembly of block copolymers (BCPs) while under complete confinement. Nanoimprint directed self-assembly conveniently avoids repetitive and expensive chemical or topographical prepatterning of substrates. To demonstrate this technique for high-resolution nanofabrication, we aligned sub-10 nm resolution nanopatterns using a cylinder-forming, organic-inorganic hybrid block copolymer, polystyrene-block-polydimethylsiloxane (PS-b-PDMS). Nanopatterns derived from oxidized PDMS microdomains were successfully transferred into the underlying substrate using plasma etching. In the development phase of this procedure, we investigated the role of mold treatments and pattern geometries as DSA of BCPs are driven by interfacial chemistry and physics. In the optimized route, silicon molds treated with PDMS surface brushes promoted rapid BCP alignment and reliable mold release while appropriate mold geometries provided a single layer of cylinders and negligible residual layers as required for pattern transfer. Molds thus produced were reusable to the same efficacy between nanoimprints. We also demonstrated that shear flow during the nanoimprint process enhanced the alignment of the BCP near open edges, which may be engineered in future schemes to control the BCP microdomain alignment kinetics during DSA.

Plasmonic nanocrystals have been attracting a lot of attention both for fundamental studies and different applications, from sensing to imaging and optoelectronic devices. Transparent conductive oxides represent an interesting class of plasmonic materials in addition to metals and vacancy-doped semiconductor quantum dots. Herein, we report a rational synthetic strategy of high-quality colloidal aluminum-doped zinc oxide nanocrystals. The presence of substitutional aluminum in the zinc oxide lattice accompanied by the generation of free electrons is proved for the first time by tunable surface plasmon absorption in the infrared region both in solution and in thin films.

Through pH-tuning of electrostatic interactions between polymer ligands and nanoparticles at structured-liquid interfaces, liquid droplets can be directed between a jammed nonequilibrium state and a dynamic reconfigurable state. The nanoparticle-surfactant dynamics highly depend on the pH, so that the liquids can be structured using an external field and under variation of pH, or alternatively being realized by remote photo-triggering.