Search

The paper presents the results of basic research on the influence of the properties of sand grains on electrical properties of water glass moulding sands. It shows electrical properties of the main component – sand grains, crucial to the kinetics of moulding sands heating, such as permittivity εr and loss factor tgδ. Measurements were carried out with the use of the perturbation method for silica, chromite and olivine sands of different mineral, chemical composition and particle size distribution, as well as for moulding sands with water glass grade 145. Analysis of the results of measurements of electrical properties shows that all moulding sands are characterized by a similar permittivity εr and loss factor tgδ. It was found that the electrical properties and the quantity and quality of other components may have a decisive influence on the effectiveness and efficiency of the microwave heating of moulding sands with sand grains. In determining the ability to efficiently absorb the microwave radiation for mixtures which moulding sands are, the impact of all components influencing their individual technological parameters should be taken into account.

Presented are results of a preliminary research on determining a possibility to use microwave radiation for drying casting protective coatings applied on patterns used in the lost foam technology. Taken were measurements of permittivity ετ and loss factor tgδ at 2.45 GHz, as well as attempts were made of microwave drying of a protective coating based on aluminium silicates, applied on shapes of foamed polystyrene and rigid polymeric foam. Time and results of microwave drying were compared with the results obtained by drying at 50 °C by the traditional method commonly used for removing water from protective coatings. Analysis of the obtained drying kinetics curves demonstrated that selection of proper operation parameters of microwave equipment permits the drying time to be significantly shortened. Depending on kind of the pattern material, drying process of a protective coating runs in a different way, resulting in obtaining different quality of the dried coating.

The paper presents a research on abrasion resistance of selected construction materials designed for foundry tooling applied in the innovative microwave heating process of moulding and core sands. One of the main selection criteria of the materials for foundry tooling, in particular for models, moulding boards, moulding boxes and core boxes, is their good abrasive wear resistance. Usability of the selected polymeric materials, designed for foundry tooling used in electromagnetic field, is decided also by other evaluation criteria determined in the examinations, like thermal resistance and electrical properties. Abrasion resistance of the selected materials was determined for three grades of the moulding sand matrixes. Combined analysis of the determined abrasion resistance, considering also electrical properties and thermal resistance of the foundry tooling materials, characterising their usability for microwave heating of moulding and core sands, will make possible their systemising with respect to effectiveness and efficiency of the heating process, taking under consideration durability of such foundry tooling to be used in industrial conditions.

In the paper presented are results of a research on influence of electrical and physico-chemical properties of materials being parts of multicomponent and multimaterial systems used in foundry practice on efficiency and effectiveness of microwave heating. Effectiveness of the process was evaluated on the grounds of analysis of interaction between selected parameters of permittivity and loss factor, as well as collective index of energy absorbed, reflected and transmitted by these materials. In the examinations used was a stand of waveguide resonance cavity for determining electrical properties and a stand of microwave slot line for determining balance of microwave power emitted into selected materials. The examinations have brought closer the possibility of forecasting the behaviour of multimaterial systems like e.g. model, moulding sand or moulding box in microwave field on the grounds of various electrical and physico-chemical properties. On the grounds of analysis of the results, possible was selecting a group of materials designed for building foundry instrumentation to be effectively used in electromagnetic field.

Within the research, carried-out were examinations of foundry rejects in form of waste moulding and core sands in order to determine effectiveness of the microwave utilization process. Presented are measurements of permittivity and loss tangent that determine behaviour of materials in electromagnetic field. Measurements were performed on a stand of waveguide resonance cavity that permits precise determination of the above-mentioned parameters with the perturbation method. Examination results of five waste moulding sands confirm that effectiveness of microwave utilization depends on electrical properties of the sandmixes (permittivity and loss tangent).

The paper describes preliminary examinations on establishing usefulness criteria of foundry tooling materials in the microwave heating technology. Presented are measurement results of permittivity and loss tangent that determine behaviour of the materials in electromagnetic field. The measurements were carried-out in a waveguide resonant cavity that permits precise determination the above-mentioned parameters by perturbation technique. Examined were five different materials designed for use in foundry tooling. Determined was the loss factor that permits evaluating usefulness of materials in microwave heating technology. It was demonstrated that the selected plastics meet the basic criterion that is transparency for electromagnetic radiation.