Search

Here, we adapt the catalytically self-threading polyrotaxane synthesis for the construction of two-dimensional polymeric thin films using a water−oil interfacial polymerization method. In this method, the polymerization and the rotaxane formation take place simultaneously at the interface because of the presence of catalytically active cucurbit[6]uril (CB6) that can facilitate 1,3-dipolar cycloaddition reaction between alkyne and azide to form polytriazoles. By varying the concentration of the monomers, reaction time, and the size of the reaction vessel, it is possible to control the thickness and the lateral dimensions of the film. The as-synthesized film is free-floating, transparent, and robust enough to be transferred to any substrates. It contains photoactive porphyrin units which are quite appealing as a photosensitizer because of their capability to produce reactive oxygen species in high yield upon visible light irradiation. By taking advantage of these aforementioned features, this film was employed as a broad-spectrum photo-antimicrobial agent whose activity was switched on by light excitation against both Gram-negative and Gram-positive bacterial strains and switched off in the dark.

Antibacterial surfaces coated with nanomaterials, including silver nanoparticles, are considered effective alternative antimicrobial agents that can be used instead of antibiotics and chemical agents. However, reports of the potential toxicity of these materials raise questions about the safety of their use in biomedical applications. The objective of this research was to reduce the human cell cytotoxicity of silver nanoparticle-coated polyurethane foils by complexing silver nanoparticles with graphene oxide. The antimicrobial activity of nanoplatforms coated with silver nanoparticles, graphene oxide and the composite of silver nanoparticles and graphene oxide was assessed with Salmonella enteritidis. Cytotoxicity was analysed by an analysis of the viability and morphology of human fibroblasts, human umbilical vein endothelial cells (HUVECs) and chicken embryo chorioallantoic membrane. Additionally, the synthesis level of inflammatory proteins was examined for fibroblasts cultured on different nanoplatforms. The nanoplatform coated with the silver nanoparticles and graphene oxide composite showed strongest antibacterial properties, although nanoplatforms coated with only silver nanoparticles or graphene oxide also resulted in decreased S. enteritidis growth. Furthermore, a nanoplatform coated with silver nanoparticles and graphene oxide composite showed limited immunological stimulation and significantly reduced cytotoxicity towards fibroblasts, HUVECs and chicken embryo chorioallantoic membrane in comparison to the nanoplatform coated only with silver nanoparticles, due to the higher stability of the nanomaterials in the nanocomposite.

In this study, assessment of the antimicrobial activity of a novel, plasma-cured 2.5% (w/v) Cu(NO3)2-containing sol–gel surface was performed. In contrast to state-of-the-art sol–gel coatings, the plasma curing led to a gradient in cross-linking with the highest values at the top of the coating. As a result, the coating behaved simultaneously hard, scratch-resistant, and tough, the latter due to the more flexible bulk of the coating toward the substrate. Further, the diffusion and permeation through the coating also increased toward the substrate. In our study, tests according to ISO 22196 showed antibacterial activity of the 2.5% (w/v) Cu(NO3)2-containing sol–gel surface against all bacterial strains tested, and we expanded the testing further using a “dry” evaluation without an aqueous contact phase, which confirmed the antimicrobial efficacy of the 2.5% (w/v) Cu(NO3)2-containing sol–gel surface. However, further investigation under exposure to soiling with the addition of 0.3% albumin, used to simulate organic load, led to a significant impairment in the antibacterial effect under both tested conditions. Furthermore, re-testing of the surface after disinfection with 70% ethanol led to a total loss of antibacterial activity. Our results showed that besides the mere application of an antimicrobial agent to a surface coating, it is also necessary to consider the future use of these surfaces in the experimental phase combining industry and science. Therefore, a number of tests corresponding to the utilization of the surface should be obligative on the basis of this assessment.

Background: Infection that is related to implanted biomaterials is a serious issue in the clinic. Antimicrobial peptides (AMPs) have been considered as an ideal alternative to traditional antibiotic drugs, for the treatment of infections, while some problems, such as aggregation and protein hydrolysis, are still the dominant concerns that compromise their antimicrobial efficiency in vivo. Methods: In this study, antimicrobial peptides underwent self-assembly on gold substrates, forming good antibacterial surfaces, with stable antibacterial behavior. The antimicrobial ability of AMPs grafted on the surfaces, with or without glycine spaces or a primer layer, was evaluated. Results: Specifically, three Pac-525 derivatives, namely, Ac-CGn-KWRRWVRWI-NH2 (n = 0, 2, or 6) were covalently grafted onto gold substrates via the self-assembling process for inhibiting the growth of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Furthermore, the alkanethiols HS(CH)10SH were firstly self-assembled into monolayers, as a primer layer (SAM-SH) for the secondary self-assembly of Pac-525 derivatives, to effectively enhance the bactericidal performance of the grafted AMPs. The -(CH)10-S-S-G6Pac derivative was highly effective against S. aureus and E. coli, and reduced the viable amount of E. coli and S. aureus to 0.4% and 33.2%, respectively, after 24 h of contact. In addition, the immobilized AMPs showed good biocompatibility, promoting bone marrow stem cell proliferation. Conclusion: the self-assembled monolayers of the Pac-525 derivatives have great potential as a novel therapeutic method for the treatment of implanted biomaterial infections.

International audience; Sodium chloride (NaCl) is commonly found in physiological buffers. This study found out its additional but important role in antibacterial efficiency test by better corroding metallic copper surface. Combined with multiple characterisation methods including scanning electron microscopy, grazing incidence X-ray diffractometry, and inductively coupled plasma mass spectrometry, 0.9% saline was observed to cause localised corrosion attacks on copper surface, enhancing release of copper content. The 1 h killing rate against Escherichia coli was thus promoted from 22% (when re-suspended in pure water) to 98%. By a long-term observation (3-week), residual NaCl crystals on 0.9% saline treated copper surface were found partially disappeared in atmospheric environment, contributing to an additional Cu2O layer forming above the treated surface. Besides, formation of oxygen-containing species was observed on fresh copper surface exposed by focused ion beam after saline treatment, suggesting a chloride-assisted atmospheric corrosion process.

Made available in DSpace on 2019-10-06T17:00:56Z (GMT). No. of bitstreams: 0 Previous issue date: 2019-03-15 Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) Fundação de Apoio ao Desenvolvimento do Ensino, Ciência e Tecnologia do Estado de Mato Grosso do Sul This work describes the morphology, corrosion resistance, and antibacterial performance of copper coating deposited onto carbon steel by cold gas spray (CGS). Cross-sectional images of the coating showed a dense microstructure, with porosity lower than 1%. XRD analysis revealed no oxides or phases different to pure copper. The results of electrochemical tests demonstrated the efficient barrier properties and the compact microstructure of the coating, which protected the substrate against corrosion in chloride solution for >1000 h. The copper coating was effective as an antimicrobial agent for inhibiting the growth of Staphylococcus aureus, with bacterial growth being completely inhibited after 10 min of direct contact between the bacteria and the coating surface. UNESP - São Paulo State University Institute of Chemistry, Rua Prof. Francisco Degni, 55, P.O. Box 355 Barcelona University CPT, Martí I Franqués 1 Federal University of Mato Grosso do Sul, P.O. Box 549 UNESP - São Paulo State University Institute of Chemistry, Rua Prof. Francisco Degni, 55, P.O. Box 355 CNPq: 153177/2014-4 CNPq: 201325/2014-4 Fundação de Apoio ao Desenvolvimento do Ensino, Ciência e Tecnologia do Estado de Mato Grosso do Sul: 59/300.490/2016

We developed an easy and reproducible synthetic method to graft a monolayer of copper sulfide nanoparticles (CuS NP) on glass and exploited their particular antibacterial features. Samples were fully characterized showing a good stability, a neat photo-thermal effect when irradiated in the Near InfraRed (NIR) region (in the so called &ldquo, biological window&rdquo, ), and the ability to release controlled quantities of copper in water. The desired antibacterial activity is thus based on two different mechanisms: (i) slow and sustained copper release from CuS NP-glass samples, (ii) local temperature increase caused by a photo-thermal effect under NIR laser irradiation of CuS NP&ndash, glass samples. This behavior allows promising in vivo applications to be foreseen, ensuring a &ldquo, static&rdquo, antibacterial protection tailored to fight bacterial adhesion in the critical timescale of possible infection and biofilm formation. This can be reinforced, when needed, by a photo-thermal action switchable on demand by an NIR light.

Nanostructured surfaces can be engineered to kill bacteria in a contact-dependent manner. The study of bacterial interactions with a nanoscale topology is thus crucial to developing antibacterial surfaces. Here, a systematic study of the effects of nanoscale topology on bactericidal activity is presented. We describe the antibacterial properties of highly ordered and uniformly arrayed cotton swab-shaped (or mushroom-shaped) nanopillars. These nanostructured surfaces show bactericidal activity against Staphylococcus aureus and Pseudomonas aeruginosa. A biophysical model of the cell envelope in contact with the surface, developed ab initio from the infinitesimal strain theory, suggests that bacterial adhesion and subsequent lysis are highly influenced by the bending rigidity of the cell envelope and the surface topography formed by the nanopillars. We used the biophysical model to analyse the influence of the nanopillar cap geometry on the bactericidal activity and made several geometrical alterations of the nanostructured surface. Measurement of the bactericidal activities of these surfaces confirms model predictions, highlights the non-trivial role of cell envelope bending rigidity, and sheds light on the effects of nanopillar cap architecture on the interactions with the bacterial envelope. More importantly, our results show that the surface nanotopology can be rationally designed to enhance the bactericidal efficiency. ispartof: Microorganisms vol:8 issue:2 ispartof: location:Switzerland status: published

A novel biscarbazol triphenylamine end-capped dendrimeric zinc(II) porphyrin (DP 5) was synthesized by click chemistry. This compound is a cruciform dendrimer that bears a nucleus of zinc(II) tetrapyrrolic macrocycle substituted at the meso positions by four identical substituents. These are formed by a tetrafluorophenyl group that possesses a triazole unit in the para position. This nitrogenous heterocyclic is connected to a 4,4′-di(N-carbazolyl)triphenylamine group by means of a phenylenevinylene bridge, which allows the conjugation between the nucleus and this external electropolymerizable carbazoyl group. In this structure, dendrimeric arms act as light-harvesting antennas, increasing the absorption of blue light, and as electroactive moieties. The electrochemical oxidation of the carbazole groups contained in the terminal arms of the DP 5 was used to obtain novel, stable, and reproducible fully π-conjugated photoactive polymeric films (FDP 5). First, the spectroscopic characteristics and photodynamic properties of DP 5 were compared with its constitutional components derived of porphyrin P 6 and carbazole D 7 moieties in solution. The fluorescence emissions of the dendrimeric units in DP 5 were more strongly quenched by the tetrapyrrolic macrocycle, indicating photoinduced energy transfer. In addition, FDP 5 film showed the Soret and Q absorption bands and red fluorescence emission of the corresponding zinc(II) porphyrin. Also, FDP 5 film was highly stable to photobleaching, and it was able to produce singlet molecular oxygen in both N,N-dimethylformamide (DMF) and water. Therefore, the porphyrin units embedded in the polymeric matrix of FDP 5 film mainly retain the photochemical properties. Photodynamic inactivation mediated by FDP 5 film was investigated in Staphylococcus aureus and Escherichia coli. When a cell suspension was deposited on the surface, complete eradication of S. aureus and a 99% reduction in E. coli survival were found after 15 and 30 min of irradiation, respectively. Also, FDP 5 film was highly effective to eliminate individual bacteria attached to the surface. In addition, photodynamic inactivation (PDI) sensitized by FDP 5 film produced >99.99% bacterial killing in biofilms formed on the surface after 60 min irradiation. The results indicate that FDP 5 film represents an interesting and versatile photodynamic active material to eradicate bacteria as planktonic cells, individual attached microbes, or biofilms. Fil: Heredia, Daniel Alejandro. Universidad Nacional de Río Cuarto. Instituto para el Desarrollo Agroindustrial y de la Salud. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto para el Desarrollo Agroindustrial y de la Salud; Argentina Fil: Martinez, Sol Romina. Universidad Nacional de Río Cuarto. Instituto para el Desarrollo Agroindustrial y de la Salud. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto para el Desarrollo Agroindustrial y de la Salud; Argentina Fil: Durantini, Andres Matías. Universidad Nacional de Río Cuarto. Instituto para el Desarrollo Agroindustrial y de la Salud. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto para el Desarrollo Agroindustrial y de la Salud; Argentina Fil: Pérez, María Eugenia. Universidad Nacional de Río Cuarto. Instituto para el Desarrollo Agroindustrial y de la Salud. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto para el Desarrollo Agroindustrial y de la Salud; Argentina Fil: Mangione, Maria Ines. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario. Instituto de Química Rosario. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas. Instituto de Química Rosario; Argentina Fil: Durantini, Javier Esteban. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; Argentina Fil: Gervaldo, Miguel Andres. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; Argentina Fil: Otero, Luis Alberto. Universidad Nacional de Río Cuarto. Facultad de Ciencias Exactas Fisicoquímicas y Naturales. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Investigaciones en Tecnologías Energéticas y Materiales Avanzados; Argentina Fil: Durantini, Edgardo Néstor. Universidad Nacional de Río Cuarto. Instituto para el Desarrollo Agroindustrial y de la Salud. - Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto para el Desarrollo Agroindustrial y de la Salud; Argentina

AKTAS, SITKI/0000-0002-9143-6752; yalcin, emine/0000-0002-5280-5375; DURDU, SALIH/0000-0002-6288-0926; Aktug, Salim Levent/0000-0001-7755-0279 WOS: 000488409900006 Ag (silver)-based bioceramic coatings were fabricated on AZ31 Mg alloy by combining the MAO (micro-arc oxidation) and PVD (physical vapor deposition) methods. As a first step, AZ31 Mg surfaces were coated using MAO using a solution consisting of sodium silicate and potassium hydroxide. As a second step, an Ag layer was accumulated on the MAO surfaces using the PVD method. The XRD patterns thus obtained demonstrated the presences of Mg (magnesium), Si (silicon), M2SiO4 (forsterite) and MgO (periclase) on the Ag-deposited MAO surfaces. The elemental or compound structures of Ag were not detected due to the homogeneous distribution of a trace amount of Ag on the surfaces. Both coatings' surfaces were porous due to the existence of discharge channels. All elements were found to be uniformly distributed across the entirety of the surfaces. The Ag-deposited MAO surfaces were found to have hydrophobic properties with respect to plain MAO surfaces. Newly formed layers consisted of Ca-15(SiO4)(6)(PO4)(2) (calcium silicate phosphate), Ca-3(PO4)(2) (tuite) and Ca-10(PO4)(6)(OH)(2) (hydroxyapatite) as produced on plain MAO and Ag-deposited MAO surfaces by immersion in SBF (simulated body fluid); these layers were more homogeneous on Ag-deposited MAO coatings than ones on plain MAO. Also, for E. coli (Escherichia coli) and S. murus (Staphylococcus moms) bacteria, the numbers of active bacterial colonies on Ag-deposited MAO surfaces were significantly reduced with respect to plain MAO surfaces.

In this work, laser micropolishing (LμP) was employed to reduce the surface roughness and waviness of cold-rolled AISI 304 stainless steel sheets. A pulsed fibre laser operating in the ns regime was used and the influence of laser parameters in a N2-controlled atmospheres was evaluated. In the optimal conditions, the surface remelting induced by the process allowed to reduce the surface roughness by closing cracks and defects formed during the rolling process. Other conditions that did not improve the surface quality were analysed for defect typology. Moreover, laser treatments allowed the production of more hydrophobic surfaces, and no surface chemistry modification was identified. Surface cleanability was investigated with Escherichia coli (E. coli), evaluating the number of residual bacteria adhering to the substrate after a washing procedure. These results showed that LμP is a suitable way to lower the average surface roughness by about 58% and average surface waviness by approximately 38%. The LμP process proved to be effective on the bacteria cleanability as approximately five times fewer bacteria remained on the surfaces treated with the optimized LμP parameters compared to the untreated surfaces.

The effective and widely tested biocides: Benzalkonium chloride, bronopol, chitosan, chlorhexidine and irgasan were added in different concentrations to atelocollagen matrices. In order to assess how these antibacterial agents influence keratinocytes cell growth, cell viability and proliferation were determined by using MTT assay. Acquired data indicated a low toxicity by employing any of these chemical substances. Furthermore, cell viability and proliferation were comparatively similar to the samples where there were no biocides. It means that regardless of the agent, collagen-cell-attachment properties are not drastically affected by the incorporation of those biocides into the substrate. Therefore, these findings suggest that these atelocollagen substrates enhanced by the addition of one or more of these agents may render effectiveness against bacterial stains and biofilm formation, being the samples referred to herein as "antimicrobial substrates" a promising view in the design of novel antimicrobial biomaterials potentially suitable for tissue engineering applications., European Regional Development Fund (ERDF)European Commission; national budget of Czech Republic [CZ.1.05/2.1.00/03.0111]; Advanced Theoretical and Experimental Studies of Polymer Systems [CZ.1.07/2.3.00/20.0104]

A physico-chemical approach to modify surfaces not only for use in medicine, but also for preservation of food is nowadays widely studied to lower the risks of increased number of bacterial pathogens that are in a direct contact with people. Food safety is very important part of preserving sustainability during crises, especially after the enterohaemorrhagic Escherichia coli outbreak in Europe in 2011. One of the possibility how we can protect food against various pathogens is the modification of packing materials that are directly in contact with preserved food. This contribution deals with the characterization of modified surfaces with antibacterial properties via Terahertz spectroscopy. For the purpose of this paper, three monomers were used for grafting onto air radiofrequency plasma activated low density polyethylene surface, which created a brush-like structure. Next, the antibacterial agents, Irgasan and Chlorhexidine, were anchored to these surfaces. These antibacterial agents were selected for supposed effect on two most frequently occurring bacterial strains - Escherichia coli and Staphylococcus aureus. Materials were further tested for the presence of antibacterial agent molecules, in our case by means of terahertz spectroscopy. Each material was tested on two spectroscopes - the SPECTRA and the OSCAT terahertz instruments.

International audience; A new antibacterial material has been elaborated by grafting mesoarylporphyrin on cotton fabric by the means of cellulose azidation followed by "Click-Chemistry" reaction with acetylenic porphyrin. Azidation and functionalization have been checked by ATR-FTIR spectroscopy. Under irradiation with visible light, this material displayed an antibacterial activity against representative strains of Escherichia coli and Staphylococcus aureus. This new photobactericidal textile has potential for industrial, medical, and household applications.

In this work laser micro polishing (LMP) of cold rolled 0.3 mm thick 304 stainless steel with a pulsed fibre laser is studied, for applications where antibacterial properties are required. Due to its production method, the initial surface roughness of the tested material was considerably low (Sa=85.3±2.8 μm), rendering a demanding case for the laser polishing process. Accordingly, process feasibility under three different atmospheric conditions, namely ambient, Ar and N 2 atmosphere, was investigated. A large set of process parameter combinations was tested and initial analysis was carried out to identify the polishing feasibility by inspection under an optical microscope. Once the feasibility window was determined, a primary characterization was made on selected surfaces for roughness and waviness. Results show that in some process conditions belonging to the explored feasibility range, surface roughness could be decreased by 50%.