Search

Scanning tunneling microscopy was used to study the surfaces of 20-100 nm thick FeGe films grown by molecular beam epitaxy. An average surface lattice constant of ∼6.8 Å, in agreement with the bulk value, was observed via scanning tunneling microscopy, low energy electron diffraction, and reflection high energy electron diffraction. Each of the four possible chemical terminations in the FeGe films were identified by comparing atomic-resolution images, showing distinct contrast with simulations from density functional theory calculations. A detailed study of the atomic layering order and registry across step edges allows us to uniquely determine the grain orientation and chirality in these noncentrosymmetric films.

Skyrmion imaging and electrical detection via topological Hall (TH) effect are two primary techniques for probing magnetic skyrmions, which hold promise for next-generation magnetic storage. However, these two kinds of complementary techniques have rarely been employed to investigate the same samples. We report the observation of nanoscale skyrmions in SrIrO3/SrRuO3 (SIO/SRO) bilayers in a wide temperature range from 10 to 100 K. The SIO/SRO bilayers exhibit a remarkable TH effect, which is up to 200% larger than the anomalous Hall (AH) effect at 5 K, and zero-field TH effect at 90 K. Using variable-temperature, high-field magnetic force microscopy (MFM), we imaged skyrmions as small as 10 nm, which emerge in the same field ranges as the TH effect. These results reveal a rich space for skyrmion exploration and tunability in oxide heterostructures.

Ferrimagnetic insulators capped with a heavy metal are becoming an increasingly interesting materials system in spintronics due to their unique ability for electrical manipulation and detection of magnetic states and spin textures via spin-orbit torques. The ability to engineer magnetic anisotropy is a powerful tool for tuning the recently discovered phenomena in these bilayers such as electrical switching or the stabilization of topological magnetic textures. We observe large shifts in the magnetic anisotropy in ${\mathrm{Tm}}_{3}{\mathrm{Fe}}_{5}{\mathrm{O}}_{12}$ and ${\mathrm{Y}}_{3}{\mathrm{Fe}}_{5}{\mathrm{O}}_{12}$ thin films due to heavy-metal capping layers, which strongly depends on the orientation of the substrate and therefore the orientation of the epitaxial films. This work suggests large Rashba spin-orbit coupling at the metal/ferrimagnetic-insulator interface, which can be engineered in spintronic devices that utilize spin-orbit torques for electrical control of the magnetization in magnetic insulators.

Interfacial magnetic anisotropy in magnetic insulators has been largely unexplored. Recently, interface-induced skyrmions and electrical control of magnetization have been discovered in insulator-based heterostructures, which demand a thorough understanding of interfacial interactions in these materials. We observe a substantial, tunable interfacial magnetic anisotropy between Tm_{3}Fe_{5}O_{12} epitaxial thin films and fifteen nonmagnetic materials spanning a significant portion of the periodic table, which we attribute to Rashba spin-orbit coupling. Our results show a clear distinction between nonmagnetic capping layers from the d block and the p block. This work offers a new path for controlling magnetic phases in magnetic insulators for low-loss spintronic applications.

The interfacial Dzyaloshinskii-Moriya interaction (DMI) is responsible for the emergence of topological spin textures such as skyrmions in layered structures based on metallic and insulating ferromagnetic films. However, there is active debate on where the interfacial DMI resides in magnetic insulator systems. We investigate the topological Hall effect, which is an indication of spin textures, in Tm_{3}Fe_{5}O_{12} films capped with various metals. The results reveal that Pt, W, and Au induce strong interfacial DMI and topological Hall effect, while Ta and Ti cannot. This study also provides insights into the mechanism of electrical detection of spin textures in magnetic insulator heterostructures.

Aseptic loosening is the main reason for revision of total hip arthroplasty, and relative micromotions between cementless acetabular cups and bone play an important role regarding their comparatively high loosening rate. Therefore, the aim of the present study was to analyze the influence of resulting frictional torques on the primary stability of press-fit acetabular cups subjected to two different bearing partners. A cementless press-fit cup was implanted in bone-like foam. Primary stability of the cup was analyzed by determining spatial total, translational, and rotational interface micromotions by means of an eddy current sensor measuring system. Torque transmission into the cup was realized by three synchronous servomotors considering resultant friction torques based on constant friction for ceramic-on-ceramic (CoC: μ = 0.044; max. resultant torque: 1.5 Nm) and for ceramic-on-polyethylene (CoP: μ = 0.063; max. resultant torque: 1.9 Nm) bearing partners. Rotational micromotion of CoC was 8.99 ± 0.85 µm and of CoP 13.39 ± 1.43 µm. Translational micromotion of CoC was 29.93 ± 1.44 μm and of CoP 39.91 ± 2.25 μm. Maximum total relative micromotions were 37.10 ± 1.07 μm for CoC and 51.64 ± 2.18 μm for CoP. Micromotions resulting from CoC were statistically lower than those resulting from CoP (p

Background The resultant hip force causes a varus torque which must be compensated by a shear force couple depending on the stem alignment of the prosthesis. Since the prosthesis is substantially less flexible than the bone, the interior of the femur is stiffened over the entire prosthesis length. The present study thus aims at analyzing short-stem prostheses for its elastic bending characteristics, considering inappropriate valgus alignment of the prosthetic stem. Methods Five short stem prostheses were implanted each in synthetic femora in a standardized manner – in neutral and valgus stem alignments. Bending movements were recorded applying a tilting torque MX of ±3.5 Nm in medio-lateral direction. Variance analyses and Friedman tests were used. A P-value Findings Bending movements b1-b6 showed significant differences (P Interpretation Regarding the elastic bending behavior we see a relevant influence of the stems´ design. We conclude that the short-stem principle does not necessarily require the shortest possible prosthesis but rather a long and thin extending stem tip to optimize the lever ratios, ensuring a more physiological bending behavior of the femur. In addition, without sufficient anchoring of the prosthesis, the valgus stem alignment could favor tilting of the implant and should therefore be avoided.

The quality of the tunnel barrier at the ferromagnet/graphene interface plays a pivotal role in graphene spin valves by circumventing the impedance mismatch problem, decreasing interfacial spin dephasing mechanisms and decreasing spin absorption back into the ferromagnet. It is thus crucial to integrate superior tunnel barriers to enhance spin transport and spin accumulation in graphene. Here, we employ a novel tunnel barrier, strontium oxide (SrO), onto graphene to realize high quality spin transport as evidenced by room-temperature spin relaxation times exceeding a nanosecond in graphene on silicon dioxide substrates. Furthermore, the smooth and pinhole-free SrO tunnel barrier grown by molecular beam epitaxy (MBE), which can withstand large charge injection current densities, allows us to experimentally realize large spin accumulation in graphene at room temperature. This work puts graphene on the path to achieve efficient manipulation of nanomagnet magnetization using spin currents in graphene for logic and memory applications.

Skyrmions are localized magnetic spin textures whose stability has been shown theoretically to depend on material parameters including bulk Dresselhaus spin orbit coupling (SOC), interfacial Rashba SOC, and magnetic anisotropy. Here, we establish the growth of a new class of artificial skyrmion materials, namely B20 superlattices, where these parameters could be systematically tuned. Specifically, we report the successful growth of B20 superlattices comprised of single crystal thin films of FeGe, MnGe, and CrGe on Si(111) substrates. Thin films and superlattices are grown by molecular beam epitaxy and are characterized through a combination of reflection high energy electron diffraction, x-ray diffraction, and cross-sectional scanning transmission electron microscopy (STEM). X-ray energy dispersive spectroscopy (XEDS) distinguishes layers by elemental mapping and indicates good interface quality with relatively low levels of intermixing in the [CrGe/MnGe/FeGe] superlattice. This demonstration of epitaxial, single-crystalline B20 superlattices is a significant advance toward tunable skyrmion systems for fundamental scientific studies and applications in magnetic storage and logic., Comment: 16 pages, 7 figures

Layered Zintl phase van der Waals (vdW) materials are of interest due to their strong spin-orbit coupling and potential for high mobility. Here, we report the successful growth of large area CaGe 2 films, as a model of layered Zintl phase materials, on atomically flat Ge(111) substrates by molecular beam epitaxy (MBE) using an alternating layer growth (ALG) protocol. Reflection high energy electron diffraction (RHEED) patterns of the Ge buffer layer and CaGe 2 indicate high quality two dimensional surfaces, which is further confirmed by atomic force microscopy (AFM), showing atomically flat and uniform CaGe 2 films. The appearance of Laue oscillations in X-ray diffraction (XRD) and Kiessig fringes in the X-ray reflectivity (XRR), which are absent in co-deposited CaGe 2 , confirms the uniformity of the CaGe 2 film and the smoothness of the interface. These results demonstrate a novel method of deposition of CaGe 2 that could be also applied to other layered Zintl phase vdW materials. Also, the high quality of the CaGe 2 film is promising for the exploration of novel properties of germanane.

Electrical detection of topological magnetic textures such as skyrmions is currently limited to conducting materials. While magnetic insulators offer key advantages for skyrmion technologies with high speed and low loss, they have not yet been explored electrically. Here, we report a prominent topological Hall effect in Pt/Tm$_3$Fe$_5$O$_{12}$ bilayers, where the pristine Tm$_3$Fe$_5$O$_{12}$ epitaxial films down to 1.25 unit cell thickness allow for tuning of topological Hall stability over a broad range from 200 to 465 K through atomic-scale thickness control. Although Tm$_3$Fe$_5$O$_{12}$ is insulating, we demonstrate the detection of topological magnetic textures through a novel phenomenon: 'spin-Hall topological Hall effect' (SH-THE), where the interfacial spin-orbit torques allow spin-Hall-effect generated spins in Pt to experience the unique topology of the underlying skyrmions in Tm$_3$Fe$_5$O$_{12}$. This novel electrical detection phenomenon paves a new path for utilizing a large family of magnetic insulators in future skyrmion technologies.

For preclinical statements about the anchoring behavior of prostheses, the primary stability of the prosthesis is of special importance. It was the aim of this study to examine and compare the relevant relative micromotions of three different acetabulum prostheses by introducing three-dimensional torques.The cups were implanted under standard conditions into an anatomical artificial bone model. Three-dimensional torques were applied to the acetabular cups. Taking into account the resulting frictional moments of two different bearing couples, ceramic-on-ceramic and ceramic-on-polyethylene, the relative micromotions of the cups were recorded as maximum total micromotion, translational and rotational micromotion, and the primary stability values of the three cups were compared.Relative micromotion of all cup models was always significantly smaller with the CoC bearing couples than with the CoP bearing couples (p 0.001). The rotational micromotion was always lower (p 0.001) than the translational micromotion, and the rotational as well as the translational micromotions were each always lower than the maximum total micromotion (p 0.001, p 0.010). The thinnest-walled cup system always showed the largest relative micromotions.The results of our study can be interpreted as indicating that the low relative micromotions of all cups - irrespective of the use of CoC or CoP bearing couples - are within an acceptable range favoring secondary osseointegration of the implants. Furthermore, we were able to show that the cup wall thickness and the surface quality of the cup systems have an influence on the primary stability and the elastic deformability of the examined cup systems.

We report the successful growth of high-quality SrO films on highly-ordered pyrolytic graphite (HOPG) and single-layer graphene by molecular beam epitaxy. The SrO layers have (001) orientation as confirmed by x-ray diffraction (XRD) while atomic force microscopy measurements show continuous pinhole-free films having rms surface roughness of, 23 pages, 8 figures

Revision surgery of joint replacements is increasing and raises the demand for allograft bone since restoration of bone stock is crucial for longevity of implants. Proceedings of bone grafts influence the biological and mechanic properties differently. This study examines the effect of thermodisinfection on mechanic properties of cancellous bone. Bone cylinders from both femoral heads with length 45 mm were taken from twenty-three 6–8 months-old piglets, thermodisinfected at 82.5 °C according to bone bank guidelines and control remained native. The specimens were stored at −20 °C immediately and were put into 21 °C Ringer’s solution for 3 h before testing. Shear and pressure modulus were tested since three point bending force was examined until destruction. Statistical analysis was done with non-parametric Wilcoxon, t test and SPSS since p

We report experimental and theoretical evidence for the formation of chiral bobbers - an interfacial topological spin texture - in FeGe films grown by molecular beam epitaxy (MBE). After establishing the presence of skyrmions in FeGe/Si(111) thin film samples through Lorentz transmission electron microscopy and topological Hall effect, we perform magnetization measurements that reveal an inverse relationship between film thickness and the slope of the susceptibility (d\c{hi}/dH). We present evidence for the evolution as a function of film thickness, L, from a skyrmion phase for L < LD/2 to a cone phase with chiral bobbers at the interface for L > LD/2, where LD ~ 70 nm is the FeGe pitch length. We show using micromagnetic simulations that chiral bobbers, earlier predicted to be metastable, are in fact the stable ground state in the presence of an additional interfacial Rashba Dzyaloshinskii-Moriya interaction (DMI)., accepted to Phys. Rev. Materials

The magnetic proximity effect (MPE) is an important phenomenon for spin manipulation in spintronic devices, but to this date, researchers have been unable to demonstrate MPE using spinel ferrites, a versatile class of ferrimagnetic insulators with high Curie temperatures. In this study, magnetotransport measurements on platinum-cobalt ferrite bilayers demonstrate the presence of MPE, which results in induced ferromagnetic order in the platinum films. In contrast to earlier studies, the entire structure is grown by molecular beam epitaxy, which ensures the cleanest possible interfaces. These results enable the use of spinel ferrites for spin manipulation in future spin-logic devices.

Monolayer van der Waals (vdW) magnets provide an exciting opportunity for exploring two-dimensional (2D) magnetism for scientific and technological advances, but the intrinsic ferromagnetism has only been observed at low temperatures. Here, we report the observation of room temperature ferromagnetism in manganese selenide (MnSe$_x$) films grown by molecular beam epitaxy (MBE). Magnetic and structural characterization provides strong evidence that in the monolayer limit, the ferromagnetism originates from a vdW manganese diselenide (MnSe$_2$) monolayer, while for thicker films it could originate from a combination of vdW MnSe$_2$ and/or interfacial magnetism of $\alpha$-MnSe(111). Magnetization measurements of monolayer MnSe$_x$ films on GaSe and SnSe$_2$ epilayers show ferromagnetic ordering with large saturation magnetization of ~ 4 Bohr magnetons per Mn, which is consistent with density functional theory calculations predicting ferromagnetism in monolayer 1T-MnSe$_2$. Growing MnSe$_x$ films on GaSe up to high thickness (~ 40 nm) produces $\alpha$-MnSe(111), and an enhanced magnetic moment (~ 2x) compared to the monolayer MnSe$_x$ samples. Detailed structural characterization by scanning transmission electron microscopy (STEM), scanning tunneling microscopy (STM), and reflection high energy electron diffraction (RHEED) reveal an abrupt and clean interface between GaSe(0001) and $\alpha$-MnSe(111). In particular, the structure measured by STEM is consistent with the presence of a MnSe$_2$ monolayer at the interface. These results hold promise for potential applications in energy efficient information storage and processing.

Perpendicular magnetic anisotropy (PMA) in magnetic thin films with low coercivity is desirable for magnetic memory devices. It has been found that a (111)-oriented or textured Pt seed layer can enhance PMA and is, therefore, commonly utilized in spintronic structures. We grow (111)-oriented Pt epitaxial films via off-axis sputtering on various substrates and investigate the optimal substrate and orientation for high quality, epitaxial growth. Our results show that Pt(111) epitaxial films grow remarkably well on MgAl2O4(001) with an exceptionally narrow X-ray diffraction rocking curve. This high-quality seed layer is found to promote epitaxial growth of Pt/Co50Fe50/Pt trilayers with strong PMA comparable to many repeats of the magnetic multilayers reported previously. In addition, the Pt seed layer enhances the maximum thicknesses of Co50Fe50 that can still maintain PMA up to 1.07 nm.Perpendicular magnetic anisotropy (PMA) in magnetic thin films with low coercivity is desirable for magnetic memory devices. It has been found that a (111)-oriented or textured Pt seed layer can enhance PMA and is, therefore, commonly utilized in spintronic structures. We grow (111)-oriented Pt epitaxial films via off-axis sputtering on various substrates and investigate the optimal substrate and orientation for high quality, epitaxial growth. Our results show that Pt(111) epitaxial films grow remarkably well on MgAl2O4(001) with an exceptionally narrow X-ray diffraction rocking curve. This high-quality seed layer is found to promote epitaxial growth of Pt/Co50Fe50/Pt trilayers with strong PMA comparable to many repeats of the magnetic multilayers reported previously. In addition, the Pt seed layer enhances the maximum thicknesses of Co50Fe50 that can still maintain PMA up to 1.07 nm.

Two-dimensional crystals are an important class of materials for novel physics, chemistry, and engineering. Germanane (GeH), the germanium-based analogue of graphane (CH), is of particular interest due to its direct band gap and spin-orbit coupling. Here, we report the successful co-deposition growth of CaGe2 films on Ge(111) substrates by molecular beam epitaxy (MBE) and their subsequent conversion to germanane by immersion in hydrochloric acid. We find that the growth of CaGe2 occurs within an adsorption-limited growth regime, which ensures stoichiometry of the film. We utilize in situ reflection high energy electron diffraction (RHEED) to explore the growth temperature window and find the best RHEED patterns at 750 {\deg}C. Finally, the CaGe2 films are immersed in hydrochloric acid to convert the films to germanane. Auger electron spectroscopy of the resulting film indicates the removal of Ca and RHEED patterns indicate a single-crystal film with in-plane orientation dictated by the underlying Ge(111) substrate. X-ray diffraction and Raman spectroscopy indicate that the resulting films are indeed germanane. Ex situ atomic force microscopy (AFM) shows that the grain size of the germanane is on the order of a few micrometers, being primarily limited by terraces induced by the miscut of the Ge substrate. Thus, optimization of the substrate could lead to the long-term goal of large area germanane films., Comment: 20 pages, 7 figures