Search

Most research on the electrochemical dynamics in materials for high-energy Li-ion batteries has focused on the global behavior of the electrode. This approach is susceptible to misleading analyses resulting from idiosyncratic kinetic conditions, such as surface impurities inducing an apparent two-phase transformation within LiNi0.8Co0.15Al0.05O2. Here, nano-focused X-ray probes are used to measure delithiation operando at the scale of secondary particle agglomerates in layered cathode materials during charge. After an initial latent phase, individual secondary particles undergo rapid, stochastic, and largely uniform delithiation, which is in contrast with the gradual increase in cell potential. This behavior reproduces across several layered oxides. Operando X-ray microdiffraction ((Formula presented.) -XRD) leverages the relationship between Li content and lattice parameter to further reveal that rate acceleration occurs between Li-site fraction (xLi) ≈0.9 and ≈0.5 for LiNi0.8Co0.15Al0.05O2. Physics-based modeling shows that, to reproduce the experimental results, the exchange current density (i0) must depend on xLi, and that i0 should increase rapidly over three orders of magnitude at the transition point. The specifics and implications of this jump in i0 are crucial to understanding the charge-storage reaction of Li-ion battery cathodes.

Oxygen participation, arising from increased transition metal-oxygen covalency during delithiation, is considered essential for the description of charge compensation in conventional layered oxides. The advent of high-resolution mapping of the O K-edge resonant inelastic X-ray scattering (RIXS) provides an opportunity to revisit the onset and extent of oxygen participation. Combining RIXS with an array of structural and electronic probes for the family of Ni-rich LiNi0.8Co0.2-yAlyO2cathodes, we identify common charge compensation regimes that are assigned to formal transition metal redox (4.25 V). From O K-edge RIXS maps, we find the emergence of a sharp RIXS feature in these systems when approaching full delithiation, which has previously been associated with lattice oxidized oxygen in alkali-rich systems. The lack of transition metal redox signatures and strong covalency at these high degrees of delithiation suggest this RIXS feature is similarly attributed to lattice oxygen charge compensation as in the alkali-rich systems. The RIXS feature's evolution with state of charge in conventional layered oxides is evidence that this feature reflects the depopulation of occupied O 2p states associated with oxygen participation.

Resonant inelastic X-ray scattering (RIXS) at the O K-edge is considered a prime technique to identify bulk oxidized oxygen formation, but its fundamental interpretation is not straightforward. In this study, we intentionally induce RIXS signatures of oxidized oxygen upon beam exposure in LiAlO2 polymorphs that are easily distinguished because of their wide band gaps. After careful consideration of beam exposure effects on Li[Li0.144Ni0.136Mn0.544Co0.136]O2 (LR-NMC), we conclude that oxidized oxygen features are inherent at high states of charge and are lost upon aggressive beam exposure. The extracted oxidized oxygen line shapes from our X-ray irradiation studies for both LiAlO2 (induced) and LR-NMC (inherent) are found to have an additional oxidized oxygen RIXS feature not observed in O2 gas studies. This study highlights the unique insight of O K-edge RIXS into determining the nature and stability of oxidized oxygen states.

Aluminum is a common dopant across oxide cathodes for improving the bulk and cathode-electrolyte interface (CEI) stability. Aluminum in the bulk is known to enhance structural and thermal stability, yet the exact influence of aluminum at the CEI remains unclear. To address this, we utilized a combination of X-ray photoelectron and absorption spectroscopy to identify aluminum surface environments and extent of transition metal reduction for Ni-rich LiNi0.8Co0.2-yAlyO2 (0%, 5%, or 20% Al) layered oxide cathodes tested at 4.75 V under thermal stress (60 °C). For these tests, we compared the conventional LiPF6 salt with the more thermally stable LiBF4 salt. The CEI layers are inherently different between these two electrolyte salts, particularly for the highest level of Al-doping (20%) where a thicker (thinner) CEI layer is found for LiPF6 (LiBF4). Focusing on the aluminum environment, we reveal the type of surface aluminum species are dependent on the electrolyte salt, as Al-O-F- and Al-F-like species form when using LiPF6 and LiBF4, respectively. In both cases, we find cathode-electrolyte reactions drive the formation of a protective Al-F-like barrier at the CEI in Al-doped oxide cathodes.

Enabling practical utilization of layered R3̅m positive electrodes near full delithiation requires an enhanced understanding of the complex electrode-electrolyte interactions that often induce failure. Using Li[Ni0.8Co0.15Al0.05]O2 (NCA) as a model layered compound, the chemical and structural stability in a strenuous thermal and electrochemical environment was explored. Operando microcalorimetry and electrochemical impedance spectroscopy identified a fingerprint for a structural decomposition and transition-metal dissolution reaction that occurs on the positive electrode at full delithiation. Surface-sensitive characterization techniques, including X-ray absorption spectroscopy and high-resolution transmission electron microscopy, measured a structural and morphological transformation of the surface and subsurface regions of NCA. Despite the bulk structural integrity being maintained, NCA surface degradation at a high state of charge induces excessive transition-metal dissolution and significant positive electrode impedance development, resulting in a rapid decrease in electrochemical performance. Additionally, the impact of electrolyte salt, positive electrode surface area, and surface Li2CO3 content on the magnitude and character of the dissolution reaction was studied.