Search

The current open-loop practices employed to render paper substrates water- and oil-repellent for packaging and non-packaging applications have generated ocean pollution and have placed daunting burdens on landfills. In this study, we report a green, unique and facile approach for the fabrication of grease- and water-resistant paper products with 100% recyclability of the paper pulp. Low surface energy polydimethylsiloxane (PDMS) was grafted onto a biobased chitosan polymer via urea linkages to prepare the graft copolymer chitosan-graft-polydimethylsiloxane (chitosan-g-PDMS). Chitosan-g-PDMS was then applied as a coating onto an unbleached Kraft paper substrate from an aqueous solution. The coated paper substrates exhibited good hydrophobic properties with a water contact angle of 120.53 ± 0.96° and a Cobb 60 value of 9.89 ± 0.32 g m−2. The coated paper substrates also showed good oil-resistance as evident from the kit rating value of 11.7/12. The tensile strength, crushing resistance, bending stiffness, and internal tearing resistance of the paper before and after coating treatment was determined. Scanning electron microscopy (SEM) analysis was used to characterize changes in the porosity of the paper before and after the coating. The pulp recyclability of the coated paper was validated by subjecting the coated paper samples to repulping and washing treatment. This novel and practical approach can provide significant environmental benefits by offering plastic-free, fluorine-free and fully-recyclable water- and grease-resistant paper; thus promoting sustainability due to its unique closed-loop nature. [ABSTRACT FROM AUTHOR]

To address the issue of marine pollution caused by microplastics, the Japanese government started charging for plastic shopping bags in July 2020 and the Plastic Resource Recycling Promotion Law (PRRPL) was passed in April 2022, thereby discouraging plastic use in Japan. However, even before these laws and regulations were established, companies and offices had begun starting to make voluntary efforts to reduce plastic use. Among these efforts, this study focused on the shift from plastic to paper materials and company efforts to lower plastic use. This study aimed to investigate the impact of the social perception of marine plastic pollution since 2018 on companies' adoption of paper materials for containers and packaging. The companies reviewed may have used up to 236,699 tons of paper materials instead of plastic since 2018. This reduction in plastic consumption is expected to decrease emissions by up to 625,424 tons of carbon dioxide (tCO2) annually, as well as external costs by up to 180.7 million yen. Hence, the shift from plastic to paper materials through firms' voluntary efforts since 2018 has helped to reduce plastic use and ameliorate the effects of global warming. [ABSTRACT FROM AUTHOR]

Owing to the increasing amount of industrial wastewater and ocean pollution, separation of water and oil from their mixtures and emulsions has been an active area in water treatment industry and in academic research. Using cellulose filter paper as the substrate, a porous superoleophobic membrane (OP) was easily prepared by immersing the paper in an acetonitrile solution of toluene diisocyanate and that of N-(2,4-diaminophenyl) maleimide, alternatively and repeatedly, coating the paper with maleimide-containing polyurea (PU). PU coated paper was then functionalized by 2-[(tris(hydroxymethyl)methyl)amino]-1-ethanesulfonic acid through aza-Michael addition. The formation of PU coating and the subsequent functionalization were confirmed by FTIR, NMR and XPS analyses. The produced OP paper was shown to be superoleophobic and had excellent performance for oil–water separation from their mixtures and emulsions. This study provides therefore a novel protocol for preparation of superoleophobic materials, featuring easy operation, low cost, and in particular, versatile applicability to different natural and synthetic materials. [ABSTRACT FROM AUTHOR]

Okadaic acid (OA), as a diarrhetic shellfish poisoning, can increase the risk of acute carcinogenic or teratogenic effects for the ingestion of OA contaminated shellfish. At present, much effort has been made to graft immunoassay onto a paper substrate to make paper-based sensors for rapid and simple detection of shellfish toxin. However, the complicated washing steps and low protein fixation efficiency on the paper substrate need to be further addressed. A novel paper-tip immunosensor for detecting OA was developed combined with smartphone and naked eye readout. The trapezoid paper tip was consisted of quantitative and qualitative detection zones. To improve the OA antigen immobilization efficiency on the paper substrate, graphene oxide (GO)-assisted protein immobilization method was introduced. Meanwhile, Au nanoparticles composite probe combined with the lateral flow washing was developed to simplify the washing step. The OA antigen-immobilized zone, as the detection zone Ⅰ, was used for quantitative assay by smartphone imaging. The paper-tip front, as the detection zone Ⅱ, which could qualitatively differentiate OA pollution level within 45 min using the naked eye. The competitive immunoassay on the paper tip exhibited a wide linear range for detecting OA (0.02–50 ng∙mL−1) with low detection limit of 0.02 ng∙mL−1. The recovery of OA in spiked shellfish samples was in the range of 90.3 %–113.%. These results demonstrated that the proposed paper-tip immunosensor could provide a simple, low-cost and high-sensitivity test for OA detection without the need for additional large-scale equipment or expertise. We anticipate that this paper-tip immunosensor will be a flexible and versatile tool for on-site detecting the pollution of marine products. [Display omitted] • A novel paper-tip immunosensor for detecting okadaic acid was developed combined with smartphone and naked eye readout. • The paper-tip immunosensor was served as a carrier for immunoreaction separation and rapid detection. • Utilizing GO to improve the efficiency of protein immobilization on paper and simplify the washing step. • The paper-tip immunosensor is expected to be a flexible and versatile tool for on-site detecting shellfish toxins. [ABSTRACT FROM AUTHOR]

The article discusses the results of a study on the effects of sulphite sediments coming from bleaching paper mills in Newfoundland towards the winter flounder after chronic exposure. Winter flounders were exposed to sediments that were collected at the benthic surface of the paper mills which contained fluctuating levels of dehydroabietic, tannin and resin acids for a period of 6 to 12 months. It was found out that the winter flounder showed evidence of external and tissue lesions, anemia, delayed spawning, abnormal parasitic infections, lymphopenia and even caused mortality after its exposure to the sulphite sediments.

The omnipresence of plastic particles in marine ecosystems, a.k.a. Marine Plastic Pollution (MPP) constitutes a major environmental and socioeconomic threat. In the last decade, the realization of the severity of the MPP problem by international organizations, governments and policy makers worldwide, has triggered the publication of a large number of review papers studying the current state of the art of MPP, from a plethora of different perspectives. This study attempts to classify the existing review efforts, by conducting a systematic analysis of review papers on MPP, published from 2000 to 2019. A sample of 114 review studies, retrieved from the SCOPUS database, are classified based on a number of carefully selected coding criteria and processed in order to produce a set of meaningful descriptive statistics and visualizations. Ultimately, the objective of this paper is to synthesize the different perspectives on MPP, assess the research progress and highlight future research directions. • There has been an explosion of scientific interest in MPP since 2018. • The most popular subjects are microplastics and environmental impacts of MPP. • The majority of reviews are qualitative. • There is a lack of meta-analyses and systematic reviews. • Total citations have roughly tripled from 2010 to 2019. [ABSTRACT FROM AUTHOR]

Abstract: Environmental regulatory edicts within the EU, such as the regulatory framework for chemicals REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals), the Water Framework Directive (WFD), and the Marine Strategy Framework Directive (MSFD) focus mainly on toxicity assessment of individual chemicals although the effect of contaminant mixtures is a matter of increasing concern. This discussion paper provides an overview of the field of combined effects in aquatic ecotoxicology and addresses some of the major challenges related to assessment of combined effects in connection with environmental risk assessment (ERA) and regulation. Potentials and obstacles related to different experimental, modelling and predictive ERA approaches are described. On-going ERA guideline and manual developments in Europe aiming to incorporate combined effects of contaminants, the use of different experimental approaches for providing combined effect data, the involvement of biomarkers to characterize Mode of Action and toxicity pathways and efforts to identify relevant risk scenarios related to combined effects are discussed. [Copyright &y& Elsevier]

This document is an editorial for a special issue of the journal Micromachines on biosensors for biomedical and environmental applications. Biosensors are devices that use biological components to detect chemical compounds. The special issue covers a broad range of biosensors, including those that detect physical, metabolic, and biochemical stimuli. The papers in the issue discuss various types of biosensors, such as those that use enzymes and antibodies, as well as innovative technological devices. The issue also includes review papers on topics such as antioxidant nanozymes, the detection of circulating tumor cells, and the use of carbon-based materials for the diagnosis and treatment of viral hepatitis. Biosensors are important tools in medical and environmental contexts, and ongoing research aims to improve their selectivity, sensitivity, and miniaturization. [Extracted from the article]

In 2010, I attended the ASLO Ocean Sciences Meeting in Portland, Oregon, and noted that they had a special session on plastic pollution. The Science paper by Thompson et al. (2004) could also have been a major impetus for the more recent increase in plastic pollution research. A UNESCO science report published in 2021 found that papers on ocean plastic pollution increased from 46 papers in 2011 to 853 papers in 2019 (Rabesandratana 2021). In 1971, Kenneth L. Smith (now at Monterey Bay Aquarium Research Institute) and I were studying the pelagic I Sargassum i community aboard the R/V Atlantis II from Woods Hole Oceanographic Institution (WHOI) in the Sargasso Sea. [Extracted from the article]

Introduction: Transboundary pollution is a major global challenge and monitoring beach litter along international borders can reveal some of the pathways by which litter enters water bodies, and hence advance the implementation of measures to prevent pollution emissions into international waters. Methods: In this paper, participatory mapping was used to detect beach litter in Imperial Beach, California, along the U.S.-Mexico international border. This study implemented a 3-step protocol including an introductory awareness workshop, a macro-debris survey to categorize and remove beach litter, and a qualitative assessment of pollution drivers. Results: Results show that plastic litter is the most dominant across all transects (304 debris, 52.6% of all litter observations), with an average density of 76 pieces/transect, with plastic being the most common material. Participants identified some of the major causes of pollution with paucity of waste management facilities, tourism activities near/on the beach, and inflow of pollution across the border. Discussion: The paper highlights the role of citizen science in monitoring pollution along large and border regions. Implications of this study include methodological and practical contributions to the study of marine pollution to supplement the current paucity of information on pollution movement and distribution. [ABSTRACT FROM AUTHOR]

The presence of microplastics (MPs) in the environment is becoming a problem for soils and seas, as well as for the food chain of animals and humans. The scientific community has been called upon to contribute to solving the problem and several papers have been published, especially in the last decade. The aim of this work is to carry out a bibliometric analysis of the scientific literature dedicated to the problem of MPs, highlighting its course over the years, and to identify the sectors to which the research could be profitably addressed. The VOSviewer software has been used to perform the analysis of the data in which specific maps were used to represent the network of the relationships among countries, journals, organizations, authors, and keywords related to the investigated topic and subtopics. The results of the survey demonstrated that during the investigated range of time, most attention has been paid to the individuation of the MPs, and to marine pollution, while a gap seems to exist in the possible advanced oxidation processes specifically addressing the degradation of MPs and their derivates. [ABSTRACT FROM AUTHOR]

The article discusses the steps undertaken in formulating a Marine Protected Areas (MPA) management plans. In order to come up with a responsive management plan several approaches were considered including management plans of agencies concerned with area planning and business plans being used by entrepreneurial organizations. The business plan approach was given emphasis for its capability to guide activities which can be readily adjusted to new knowledge during implementation. Likewise, a business plan can justify its financial conclusions which is necessary in evaluating funding requirements.

Aquaculture, also known as fish farming, is the practice of cultivating aquatic organisms such as fish, shellfish, and plants in controlled environments. While aquaculture has the potential to contribute to global food security and provide economic benefits, it also has several environmental impacts that need to be considered. The main aim of this research is to know the impact and effect of aquaculture in the environment, to analyse the reasons for aquaculture in the environment, to create awareness on aquaculture and its impacts in environment, to find the importance of aquaculture business in economy. The present paper was analysed through the doctrinal research methodology and empirical method of research was used. The present analysis was made through a convenient sampling method where the survey was taken from the common public, students, professionals, etc. The sample size in the present analysis is 203 samples responded. The research tools used in the present paper such as graphical representation were also used to analyse the study. The environmental impacts of aquaculture can vary depending on various factors, including farming methods, species cultivated, location, and management practices. Sustainable aquaculture approaches, such as integrated multi-trophic aquaculture, land-based recirculating systems, and proper site selection, can help minimize these environmental impacts and promote responsible and sustainable practices in the industry. These include the adoption of responsible farming techniques, proper waste management, the use of alternative feeds, improved disease management, and the implementation of regulations and guidelines. By adopting these practices, it is possible to minimize the negative environmental effects of aquaculture and promote the industry's sustainability for the future. [ABSTRACT FROM AUTHOR]

At the Leibniz Institute for Baltic Sea Research Warnemünde (the home institute of this paper), scientists have been exploring the common denominator between microplastics and microbiology for almost a decade. Given this fact, there is now a palpable feeling for the need to analyse the scientometric aspects of publications in this topic aiming to comprehend the impact of microplastic-microbiology studies within the scientific literature as a whole. Scientometrics is a research field focused on understanding of the metrics of science. From a researcher's perspective, it is a powerful tool to increase, for example, the ability to find the best journal for a specific paper, and consequently have a better chance to have this paper cited, which is crucial considering the competitiveness of the modern scientific landscape. However, scientists working in specific research fields, from natural sciences to engineering; mathematics to medicine, are typically unaware of the knowledge that can be gleaned from bibliometrics or scientometrics when outlining their publications strategies. This paper aims to improve this knowledge base for researchers working in microplastic and microbiological research. A total of 47 publications under analysis span from 2011 to 2018, and have been published in 23 journals, most of them interdisciplinary journals that are available for a widespread audience from both complementary and diverse subject areas. Despite a short citation window, publications received > 390 citations with a clear exponential pattern, showing a promising future for microplastic-microbiological research. Whether insofar, a researcher has been focused on either solely microplastics or microbiology, as these fields continue to collide as microplastic-microbiology interaction research continues to increase, this paper might illuminate the next steps for researchers preparing future publications. [ABSTRACT FROM AUTHOR]

The article discusses how chemical recycling, which converts waste polymers back into monomers, could boost recycling rates in future. It discusses the challenges related to plastic use as bans on single-use items such as bags and straws are growing; concern over ocean pollution, especially by micro plastics, is rising; and many countries have instigated tough legislation to raise recycling targets.

Social developments are bringing about changes in how we communicate and represent ideas. With the tendency of globalisation, marine ecosystems are facing threats such as overfishing, pollution, and climate change, and marine ecological protection has become a focus of attention for all countries. This paper adopts Kress and van Leeuwen's framework of visual grammar analysis to compare and analyse the use of symbols in Chinese and Western marine ecological protection posters from the perspectives of representational meaning, interactive meaning, and compositional meaning. Qualitative and quantitative analyses of 100 Chinese posters and 100 Western posters reveal similarities and differences in symbol selection, cultural context, and compositional approach. Results show that Chinese posters tend to integrate traditional cultural elements and natural symbols to convey the concept of environmental protection in a harmonious and warm way, such as the use of ink painting style and paper-cutting art to represent marine organisms, while Western posters focus on directly displaying the hazards of marine pollution by means of strong visual contrasts and modern design elements to stimulate the audience's sense of urgency and responsibility, such as the display of marine animals trapped by plastic rubbish. This research not only deepens the understanding of the theory of visual grammar but also provides valuable references for the design of future environmental posters, emphasising the importance of using visual symbols and communication strategies in different cultural contexts in order to convey environmental messages more effectively and to promote the development of global marine conservation. [ABSTRACT FROM AUTHOR]

Microplastics are contaminants in marine ecosystems, posing great threats to biota and human health. In this work, we provide an overview of the progress made in understanding microplastic prevalence in tropical coastal environments, focusing on the Johor and the Singapore Straits as a case study. We examine the sources, distribution, transport, and ecological impact of microplastic pollution in this region through a systematic review. All papers relating to marine microplastics in Singapore's sand and benthic sediments, seawater, and marine biota were used for analysis, from 2004 to 2023. In addition, we discuss the influence of envi-ronmental factors such as coastal morphology and anthropogenic activities on patterns of microplastic accumulation. We emphasize that microplastic pollution is more prevalent along the eutrophic Johor Strait compared to the Singapore Strait due to hydrological conditions. Rainfall is also a key factor that influences mi-croplastic abundance during the monsoon seasons. Furthermore, the bacterial and plankton assemblages of organisms on microplastic surfaces are diverse, with eutrophic waters enhancing the diversity of organisms on microplastic surfaces. Novel harmful cyanobacteria and bloom species of phytoplankton were also found on microplastic surfaces. By synthesizing existing research findings and highlighting regional characteristics, this paper contributes to ongoing efforts to mitigate microplastic pollution in tropical regions. [ABSTRACT FROM AUTHOR]

The events of the 2011 Fukushima nuclear accident in Japan have garnered global concern. Despite nuclear power plants addressing numerous energy challenges, they poses substantial risks to environmental safety. The global legal basis to fulfill due regard obligations toward nuclear wastewater discharge involves international nuclear energy and marine environmental protection laws. There is substantive scope of due regard obligations toward nuclear wastewater discharge, including fulfilling international duties, prohibiting marine environmental pollution, preventing transboundary harm, and ensuring procedural obligations. The procedural obligations encompass timely notification of nuclear pollution, scientific assessment, and active consultation and cooperation with the international community. As there are still numerous obstacles to the application of due regard in the discharge of nuclear wastewater, the international marine environment frequently suffers from nuclear pollution. Considering the potential for transboundary environmental harm owing to the discharge of nuclear wastewater, this paper proposes effective solutions to this issue from the perspective of sustainable development of the marine environment. These solutions include formulating specific normative guidelines, clarifying liability for paying transboundary harm compensation, developing unified international assessment standards, and establishing an international platform for mandatory cooperation. Such solutions reinforce the national responsibility of all countries to actively fulfill their due regard obligations and effectively resolve the issue of potential irreversible damage to the marine environment. Additionally, the paper provides suggestions regarding how the international community can address the issue of Japan's nuclear wastewater discharge and other similar issues that may arise. [ABSTRACT FROM AUTHOR]

With the increasing pressure of resource decline and environmental pollution faced by the green transformation of marine fisheries, marine fishery carbon sinks are an increasingly close link to national strategic interests and economic lifelines. It is, therefore, necessary to explore paths for the enhancement and development of the carbon sink capacity of marine fisheries. Based on the economic data of marine fisheries from 2002 to 2021, this paper measures the capacity and characteristics of marine fishery carbon sinks in provincial areas, applies the kernel density estimation method to depict the dynamic evolution of the distribution of absolute differences in marine fishery carbon sinks, and at the same time, identifies the factors influencing the spatial imbalance in the development of marine fishery carbon sinks as well as the spatial spillover effects. The results show the following: (1) From the total amount, the fishery carbon sink capacity of China's three marine economic circles has fluctuated and increased over the past 20 years, with obvious differences among different circles, and the marine fishery carbon sink capacity of the eastern, northern, and southern marine economic circles has risen sequentially. This trend corresponds to the economic disparities among the three circles, demonstrating a transition from economic to industrial driving effects. (2) From the spatial point of view, the fishery carbon sink capacity shows a trend of increasing year by year, concentrating in the circles, and overflowing between the circles. (3) The results of a partial derivative test further show that among the main influencing factors of marine fishery carbon sinks, capital, labor, and market openness have direct positive effects on marine fishery carbon sinks, and the direct effect of innovation is the strongest, and the significance of the indirect effect of the three circles is weaker compared to the direct effect and total effect. As a result, the carbon sink of China's marine fisheries has a large room for improvement, and in order to promote the high-quality development of China's marine fisheries, it is still necessary to accelerate the circulation of resources within the marine economic circle, accelerate the research of fishery technology, actively develop the carbon sink fishery, and enhance the specialization of aquatic product processing. [ABSTRACT FROM AUTHOR]

The 5th International Workshop on Heat/Mass Transfer Advances for Energy Conservation and Pollution Control (IWHT2019) was held in Technopark of Novosibirsk Akademgorodok and Novosibirsk State University (Novosibirsk, Russia) on August 13-16, 2019. The IWHT2019 included 8 plenary lectures, 28 keynote lectures, 29 invited reports, 107 oral regular presentations, and 86 poster papers. [Extracted from the article]

The Marine Institute, Ireland, runs a suite of operational regional and coastal ocean models. Recent developments include several tailored products that focus on the key needs of the Irish aquaculture sector. In this article, an overview of the products and services derived from the models are presented. A shellfish model that includes growth and physiological interactions of mussels with the ecosystem and is fully embedded in the 3-D numerical modelling framework has been developed at the Marine Institute. This shellfish model has a microbial module designed to predict levels of coliform contamination in mussels. This model can also be used to estimate the carrying capacity of embayments, assess impacts of pollution on aquaculture grounds and help to classify shellfish waters. The physical coastal model of southwest Ireland provides a three day forecast of shelf water movement in the region. This is assimilated into a new harmful algal bloom alert system used to inform end-users of potential toxic shellfish events and high biomass blooms that include fish killing species. Further services include the use of models to identify potential sites for offishore aquaculture, to inform studies of potential cross-contamination in farms from the dispersal of planktonic sea lice larvae and other pathogens that can infect finfish and to provide modelled products that underpin the assessment and advisory services on the sustainable exploitation of the marine fisheries resources. This paper demonstrates that ocean models can provide an invaluable contribution to the sustainable blue growth of aquaculture and fisheries. [ABSTRACT FROM AUTHOR]

Purpose: The increasing global concern surrounding plastic pollution has resulted in a spotlight being placed on major contributors. Straws have been identified as a top contributor in this regard leading to a global outcry against plastic straws. This has resulted in the increasing popularity of plastic straw material alternatives. This study compares the environmental impacts associated with five straw material options available in South Africa. Methods: The straw materials compared include disposable options (polypropylene, paper and polylactide) and reusable straws (glass and steel). Plastic straws were the only option which are locally produced from local materials, whereas glass and steel straws are manufactured from imported materials and paper and polylactide straws are imported. The functional unit was based on an annual straw consumption per capita, which equates to 36 disposable straws and 1 reusable straw. The impact assessment was conducted using the Recipe Midpoint (H) method, which took into consideration 18 impact categories. The potential marine pollution impacts were explored based on the leakage propensity of the material option coupled with its degradability. Results and discussion: The paper straw was found to have lower climate change emissions than the plastic one, which was mainly caused by the performance of the material. In South Africa, coal is used as a primary feedstock for polypropylene production making it more carbon-intensive in comparison with polypropylene produced in Europe and the USA which is primarily from crude oil and/or natural gas feedstocks. Glass and steel straws would require 23–39 and 37–63 uses respectively to break even with climate change emissions associated with disposable options. Overall, material production was the major contributor to straw emissions. The relative contribution of transportation, including import, was more dependent on the transportation mode compared with distance. For reusable straws, the washing water temperature was found to notably influence emissions. At end-of-life, reusable straws were considered unlikely to enter the marine environments. Disposable straws were found to have a leakage rate of 38%, with paper being the only marine degradable material. Conclusions: Overall, paper straws had the least impacts in the majority of impact categories in comparison with other disposable options and glass was more favourable to steel. In terms of marine pollution, reusable straws were deemed to pose the least risk due to their unlikelihood to be polluted. Paper was associated with the least potential impacts of the disposal options, due to its degradability. [ABSTRACT FROM AUTHOR]

Plastic pollution in the ocean is a severe environmental problem worldwide because rivers carry plastic waste from human activities, harming the ocean's health, ecosystems, and people. Therefore, monitoring the amount of plastic waste flowing from rivers and streams worldwide is crucial. In response to this issue of river-floating waste, our present research aimed to develop an automated waste measurement method tailored for real rivers. To achieve this, we considered three scenarios: clear visibility, partially submerged waste, and collective mass. We proposed the use of object detection and tracking techniques based on deep learning architectures, specifically the You Only Look Once (YOLOv5) and Simple Online and Realtime Tracking with a Deep Association Metric (DeepSORT). The types of waste classified in this research included cans, cartons, plastic bottles, foams, glasses, papers, and plastics in laboratory flume experiments. Our results demonstrated that the refined YOLOv5, when applied to river-floating waste images, achieved high classification accuracy, with 88% or more for the mean average precision. The floating waste tracking using DeepSORT also attained F1 scores high enough for accurate waste counting. Furthermore, we evaluated the proposed method across the three different scenarios, each achieving an 80% accuracy rate, suggesting its potential applicability in real river environments. These results strongly support the effectiveness of our proposed method, leveraging the two deep learning architectures for detecting and tracking river-floating waste with high accuracy. [ABSTRACT FROM AUTHOR]

Given the complexity of quantitative collection, knowledge of the distribution of microplastic pollution in many regions of the world ocean is patchy, both spatially and temporally, especially for the subsurface environment. However, with knowledge of typical hydrodynamic behavior of waste plastic material, models predicting the dispersal of pelagic and benthic plastics from land sources into the ocean are possible. Here we investigate three aspects of plastic distribution and transport in European waters. Firstly, we assess patterns in the distribution of plastics found in fluvial strandlines of the North Sea and how distribution may be related to flow velocities and distance from source. Second, we model transport of non-buoyant preproduction pellets in the Nazaré Canyon of Portugal using the MOHID system after assessing the density, settling velocity, critical and depositional shear stress characteristics of such waste plastics. Thirdly, we investigate the effect of surface turbulences and high pressures on a range of marine plastic debris categories (various densities, degradation states and shapes tested) in an experimental water column simulator tank and pressure laboratory. Plastics deposited on North Sea strandlines varied greatly spatially, as a function of material composition and distance from source. Model outputs indicated that such dense production pellets are likely transported up and down canyon as a function of tidal forces, with only very minor net down canyon movement. Behaviour of plastic fragments under turbulence varied greatly, with the dimensions of the material, as well as density, playing major determining roles. Pressure was shown to affect hydrodynamic behaviours of only low density foam plastics at pressures ≥60 bar. [ABSTRACT FROM AUTHOR]

Marine and freshwater plastic pollution is a worldwide problem affecting ecosystems and human health. Although remote sensing has been used to map large floating plastic rafts, there are research gaps in detecting submerged plastic due to the limited amount of in situ data. This study is the first to collect in situ data on submerged and floating plastics in a freshwater environment and analyse the effect of water submersion on the strength of the plastic signal. A large 10 × 10 m artificial polymer tarpaulin was deployed in a freshwater lake for a two-week period and was captured by a multi-sensor and multi-resolution unmanned aerial vehicle (UAV) and satellite. Spectral analysis was conducted to assess the attenuation of individual wavelengths of the submerged tarpaulin in UAV hyperspectral and Sentinel-2 multispectral data. A K-Means unsupervised clustering algorithm was used to classify the images into two clusters: plastic and water. Additionally, we estimated the optimal number of clusters present in the hyperspectral dataset and found that classifying the image into four classes (water, submerged plastic, near surface plastic and buoys) significantly improved the accuracy of the K-Means predictions. The submerged plastic tarpaulin was detectable to ~0.5 m below the water surface in near infrared (NIR) (~810 nm) and red edge (~730 nm) wavelengths. However, the red spectrum (~669 nm) performed the best with ~84% true plastic positives, classifying plastic pixels correctly even to ~1 m depth. These individual bands outperformed the dedicated Plastic Index (PI) derived from the UAV dataset. Additionally, this study showed that in neither Sentinel-2 bands, nor the derived indices (PI or Floating Debris Index (FDI), it is currently possible to determine if and how much of the tarpaulin was under the water surface, using a plastic tarpaulin object of 10 × 10 m. Overall, this paper showed that spatial resolution was more important than spectral resolution in detecting submerged tarpaulin. These findings directly contributed to Sustainable Development Goal 14.1 on mapping large marine plastic patches of 10 × 10 m and could be used to better define systems for monitoring submerged and floating plastic pollution. [ABSTRACT FROM AUTHOR]

Coasts are the most densely populated regions in the world and are vulnerable to different natural and human factors, e.g., sea-level rise, coastal accretion and erosion processes, the intensification of sea storms and hurricanes, the presence of marine litter, chronic pollution and beach oil spill accidents, etc. Although coastal zones have been affected by local anthropic activities for decades, their impacts on coastal ecosystems is often unclear. Several papers are presented in this Special Issue detailing the interactions between natural processes and human impacts in coastal ecosystems all around the world. A better understanding of such natural and human impacts is therefore of great relevance to confidently predict their negative effects on coastal areas and thus promote different conservation strategies. The implementation of adequate management measures will help coastal communities adapt to future scenarios in the short and long term and prevent damage due to different pollution types, e.g., beach oil spill accidents, through the establishment of Environmental Sensitivity Maps. [ABSTRACT FROM AUTHOR]

We present a new mechanistic model, Stochastic Lagrangian Aggregate Model of Sinking particles (SLAMS) for the biological pump in the ocean, which tracks the evolution of individual particles as they aggregate, disaggregate, sink, and are altered by chemical and biological processes. SLAMS considers the impacts of ballasting by mineral phases, binding of aggregates by transparent exopolymer particles (TEP), zooplankton grazing, and the fractal geometry (porosity) of the aggregates. Parameterizations for age-dependent organic carbon (orgC) degradation kinetics, and disaggregation driven by zooplankton grazing and TEP degradation, are motivated by observed particle fluxes and size spectra throughout the water column. The model is able to explain observed variations in orgC export efficiency and rain ratio from the euphotic zone and to the sea floor as driven by sea surface temperature and the primary production rate and seasonality of primary production. The model provides a new mechanistic framework with which to predict future changes on the flux attenuation of orgC in response to climate change forcing. [ABSTRACT FROM AUTHOR]

The article focuses on a study in which a Marine Aerosol Reference Tank (MART) is designed to analyze marine aerosol production and the dynamics of whitecap bubble and foam. It describes the design and working of the MART system in which bubble plume, aerosol, and foam is generated during the breaking of oceanic waves and concludes the benefits of the MART system in analyzing the dynamics of marine bubbles, aerosols, and foam.

Several countries have imposed either a ban or a tax on single-use plastic packaging, motivated by their contribution to marine plastic pollution. This may lead consumers to opt for similar unregulated substitutes, potentially undermining or even counteracting the intended effect of the policy instrument. The purpose of this study is to theoretically and empirically compare the environmental and welfare effects of the first-best Pigouvian taxes on both plastic bags and a substitute (paper bags), with two alternative second-best policy instruments: a tax on plastic products alone, and a common uniform tax on all packaging materials. The empirical analysis accounts for two different types of environmental externalities from the use of both bag types: marine pollution and greenhouse gas emissions. It also compares results for two countries, Denmark and the USA, which differ in the demand for plastic and paper bags. The theoretical analysis shows that a unilateral tax on plastic bags should equal the marginal environmental damage of plastic bags minus a fraction of the marginal environmental cost of paper bags, hence being lower than the Pigouvian tax. The optimal common tax should equal a weighted average of the marginal environmental damage of the two bag types and would be lower than the Pigouvian tax on plastics if the marginal external cost of plastic bags exceeds that for paper bags. The empirical analysis shows that for default parameters, the variation in tax level across the studied scenarios is small. It also shows that if Pigouvian taxes cannot be implemented, a common uniform tax on both bag types would result in a higher welfare gain than a tax on plastic bags alone. Sensitivity analysis reveals that the level of the second-best taxes and their associated environmental and welfare impacts are sensitive to assumptions regarding the littering rate and decay rate of plastic bags in the marine environment. • A separate tax on plastic bags leads to substitution towards unregulated products. • Both plastic bags and substitutes cause marine pollution and GHG emissions. • We estimate first and second-best environmental taxes on plastic and paper bags. • Pigouvian taxes on both plastic and paper bags yield the highest welfare effect. • A uniform tax on all bags yields higher welfare than a single tax on plastic bags. [ABSTRACT FROM AUTHOR]