Search

The article presents the possibilities of automating production pre-processing and post-processing operations for the Material Extrusion - MEX process based on Fused Filament Fabrication technology. Automation is based on hardware and software solutions. For this purpose, a special research station was developed, equipped with a warehouse of working platforms, a 3D printer and a collaborative robot that integrates individual elements of the manufacturing process. The developed solution allows for increasing the efficiency of the manufacturing cell and reducing the operator's involvement in manual operations at the pre-processing and post-processing stages. [ABSTRACT FROM AUTHOR]

Purpose: Manufacturing of products loaded with torque in an incremental process should take into account the strength in relation to the internal structure of the details. Incremental processes allow for obtaining various internal structures, both in the production process itself and as a result of designing a three-dimensional computer-aided design model with programmable strength. Finite element analysis (FEA) is often used in the modeling process, especially in the area of topological optimization. There is a lack of data for numerical simulation processes, especially for the design of products loaded with torque and manufactured additive manufacturing (AM). The purpose of this study is to present the influence of the internal structure of samples produced in the material extrusion (MEX) technology on the tested parameters in the process of unidirectional torsion and to present the practical application of the obtained results on the example of a spline connection. Design/methodology/approach: The work involved a process of unidirectional torsion of samples with different internal structures, produced in the MEX technology. The obtained results allowed for the FEA of the spline connection, which was compared with the test of unidirectional torsion of the connection. Findings: The performance of the unidirectional torsion test and the obtained results allowed us to determine the influence of the internal structure and its density on the achieved values of the tested parameters of the analyzed prototype materials. The performed FEA of the spline connection reflects the deformation of the produced connection in the unidirectional torsion test. Originality/value: There are no standards for the torsional strength of elements manufactured from polymeric materials using MEX methods, which is why the industry often does not use these methods due to the need to spend time on research, which is associated with high costs. In addition, the industry is vary of unknown solutions and limits their use. Therefore, it is important to determine, among others, the strength parameters of components manufactured using incremental methods, including MEX, so that they can be widely used because of their great potential and thus gain trust among the recipient market. In addition, taking into account the different densities of the applied filling structure of the samples made of six prototype materials commonly available from manufacturers allowed us to determine its effect on the torsional strength. The presented work can be the basis for constructors dealing with the design of elements manufactured in the MEX technology in terms of torsional strength. The obtained results also complement the existing material base in the FEA software and perform the strength analysis before the actual details are made to verify the existing irregularities that affect the strength of the details. The analysis of unidirectional torsion made it possible to supplement the material cards, which often refer to unprocessed material, e.g. in MEX processes. [ABSTRACT FROM AUTHOR]

With the advent of the Fourth Industrial Revolution, the manufacturing industry began to pay special attention to the introduction of solutions based on modern technologies. These include rapid prototyping techniques, which are also popularly known as 3D printing. As the 3D printing industry develops around the world, new brands of machine manufacturers, as well as companies providing services in this field, keep appearing. Thus, a need has arisen to organize and systematize processes and define certain quality standards. In line with Industry 4.0, it is also extremely important to consider modern production management solutions that use IT systems to integrate networked distributed components of manufacturing processes. In this context, a research gap has been observed in the development of a quality control procedure for 3D prints that can be implemented in an in-house cloud. For this reason, the main objective of the paper is to present the author's online platform, which presents a sample procedure for quality control of 3D models. The paper also analyzes the costs associated with the quality control of 3D models assuming that the company has its own infrastructure, manufacturing components and qualified staff. [ABSTRACT FROM AUTHOR]

The article presents the method of determining the assumptions for the selection of measurement methods for products manufactured with the use of incremental processes. In the research area, an analysis of 3D printing methods was carried out in terms of the specificity of the additive process, the materials used, the possibility of process deformations, and the accuracy of technological machines. With regard to the measurement methods, the analysis covered the accuracy of the method, the speed of the measurements, the costs of the measurements and the applicability to additive manufactured products. As a result of the analysis, assumptions were made for the criteria for selecting measurement methods for incrementally manufactured objects. The accuracy of prototyping in incremental processes largely depends on the accuracy of their numerical models. Taking this into account, simulations and studies of program processing of data were also carried out, starting from the development of a 3D-CAD model, through the export of numerical models and the preparation of data for manufacturing and control-measurement processes. [ABSTRACT FROM AUTHOR]

This article presents a procedure for minimizing ATOS II Triple Scan system measurement errors during the verification of geometrical accuracy of the final lateral-mandibular condyle model. The process of manufacturing a template geometrically similar to that of lateral-mandibular condyle was performed on the five-axis machining centre 100 DMU MonoBlock. The next stage of the research was related to the implementation of the measurement system procedure on the template model, and the 12 anatomical models of the mandibular body-condyle were manufactured using five different additive methods. As a result of the comparison of anatomical models of the mandibular body-condyle designed in reverse engineering/computer-aided design systems and manufactured using additive methods, the average results of histograms and parameters determining the accuracy of geometry of 12 models were obtained. In the case of models manufactured using fused deposition modelling, PolyJet and selective laser sintering techniques, a unimodal distribution was observed in the same way as in the template model. The best results were obtained in the case of models manufactured using selective laser sintering techniques (standard deviation = 0.06 mm). In the case of fused deposition modelling and PolyJet, a similar value of standard deviation (about 0.07 mm) was observed, despite the fact that the layer thickness for PolyJet technology was 0.016 mm. In the case of melted and extruded modelling and ColorJet Printing technologies, there was a bimodal distribution. Through the implementation of own template and measurement method, it will be easier to estimate errors in the manufacturing of anatomical models of lateral-mandibular condyle part. As a result, medical models, surgical templates and implants will be manufactured more accurately and precisely, which will significantly reduce intraoperative complications during the surgical procedure in this area. [ABSTRACT FROM AUTHOR]

Copyright of Polimery is the property of Industrial Chemistry Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The objective of this publication is to present a quality control methodology for additive manufacturing products made of polymer materials, where the methodology varies depending on the intended use. The models presented in this paper are divided into those that are manufactured for the purpose of visual presentation and those that directly serve the needs of the manufacturing process. The authors also a propose a comprehensive control system for the additive manufacturing process to meet the needs of Industry 4.0. Depending on the intended use of the models, the quality control process is divided into three stages: data control, manufacturing control, and post-processing control. Research models were made from the following materials: RGD 720 photopolymer resin (PolyJet method), ABS M30 thermoplastic (FDM method), E-Partial photopolymer resin (DLP method), PLA thermoplastic (FFF method), and ABS thermoplastic (MEM method). The applied measuring tools had an accuracy of at least an order of magnitude higher than that of the manufacturing technologies used. The results show that the PolyJet method is the most accurate, and the MEM method is the least accurate. The findings also confirm that the selection of materials, 3D printing methods, and measurement methods should always account not only for the specificity and purpose of the model but also for economic aspects, as not all products require high accuracy and durability. [ABSTRACT FROM AUTHOR]