Search

Purpose: A first order design of the beam optics of a superconducting proton therapy gantry beam is presented. The possibilities of superconducting magnets with respect to the beam optics such as strong fields, large apertures and superposition of different multipole fields have been exploited for novel concepts in a gantry. Since various techniques used in existing gantries have been used in our first design steps, some examples of the existing superconducting gantry designs are described and the necessary requirements of such a gantry are explained., Methods: The study of a gantry beam optics design is based on superconducting combined function magnets. The simulations have been performed in first order with the conventional beam transport codes., Results: The superposition of strong dipole and quadrupole fields generated by superconducting magnets enables the introduction of locally achromatic bending sections without increasing the gantry size. A rigorous implementation of such beam optics concepts into the proposed gantry design dramatically increases the momentum acceptance compared to gantries with normal conducting magnets. In our design this large acceptance has been exploited by the implementation of a degrader within the gantry and a potential possibility to use the same magnetic field for all energies used in a treatment, so that the superconducting magnets do not have to vary their fields during a treatment. This also enables very fast beam energy changes, which is beneficial for spreading the Bragg peak over the thickness of the tumor., Conclusions: The results show an improvement of its momentum acceptance. Large momentum acceptance in the gantry creates a possibility to implement faster dose application techniques., (Copyright © 2016. Published by Elsevier GmbH.)

Predicting analytically the coupling losses generated in a cable for fusion magnets is still a significant challenge. Difficulties are related to the complex geometry of the system: several multi-strand stages embedded in one another with different twist pitches length, difficulty to model multiplets of strands, including compaction to the final shape. A two-stage analytical geometry based model (COLISEUM) has previously been developed at CEA. We try to extend it to any n-stage cables We detail here an iterative enhancement method to an n-stage model. We validated it against experimental data and shown that it is robust enough to fit our measured coupling losses. Finally, this upgraded model can be used to assess coupling losses in fusion n-stage cables in a particularly precise way from only geometrical information and analytical tools. [ABSTRACT FROM AUTHOR]

In this article, the operating current and torque of surface-mounted permanent magnet (SPM) wind power generators with high-temperature superconducting (HTS) armature windings are analyzed. The influence of coil location and current angle on the electromagnetic performance is investigated systematically. The results show that the location of the HTS coils significantly affects the operating current and torque. Furthermore, the maximum torque current angle of SPM wind power generators with HTS armature windings can be different from 180° due to the interaction between the armature and magnet fields. A design optimization method for wind power generators with HTS armature windings is developed in this article. The optimal design is then identified with consideration of the coupling influence of coil location and current angle. [ABSTRACT FROM AUTHOR]

The aim of this article is to develop a risk management procedure, which could be applied to the magnet design process, for both superconducting and normal magnets at the Jefferson Laboratory (JLab). This procedure allowed us to identify the key risks at each of the critical phases of design and propose procedures, tests, and checks to mitigate each risk. In this article, we present a qualitative and quantitative risk management procedure commonly referred to a “failure modes and effects analysis.” As part of this procedure, we calculated a risk priority number (RPN) for each activity of the process, identified the most critical activities and proposed mitigation activities, which in turn resulted in a revised RPN. Another benefit of this procedure was the identification of appropriate “control and hold” points within the design process, which allowed one to review and approve a particular outcome before proceeding to the next sequential activity. [ABSTRACT FROM AUTHOR]

The SC200 proton therapy facility is consisting of a superconducting cyclotron, a gantry treatment room and a fixed beam room. The proton beams are transported mainly with beam transport devices, such as dipole magnets, quadrupole magnets, and corrector magnets which lie on the beam transport line layout of which is based on the beam optics design. A series of dipole, quadrupole, and corrector magnets ultimately make high-quality transmission of proton beams possible. Dipole magnets are mainly for beams deflection, quadrupole magnets are for beam focusing, and corrector magnets for orbit correction of beams. This paper shows the design of such magnets for the beam transport line. Besides, main parameters of magnets are presented and magnetic analysis work is also illustrated in this paper. The magnetic fields of dipole and quadrupole magnets are measured by hall mapping system and rotary coil measuring system. The results show that the measuring results are a little worse than the simulation results. However, both methods can meet the design requirement and the basic trend is similar to each other. [ABSTRACT FROM AUTHOR]

General Atomics has commissioned the final test facility at the central solenoid module (CSM) manufacturing site in Poway, CA, USA. The facility includes a number of critical subsystems including the feeder system (FS), supplied by the Institute of Plasma Physics Chinese Academy of Science (ASIPP), that connects the test chamber to the cryogenic and electrical systems. It includes a coil termination box, high-temperature superconducting current leads, and a feeder duct. The FS carries the current (50 kA) and supercritical helium (4.5 K, 5.5 bara) to the CSM and its supporting structure, while monitoring and controlling the temperature, pressure, flow, and voltage drop through all elements of the superconducting components. It functions as an integral part of the system to rapidly (6-s decay time) dissipates 1-GJ energy stored in the coils, and to protect the cryogenic system. The system is complex, requiring multidisciplinary engineering including: high-temperature superconductivity, cryogenic-temperatures (77, 50, and 4.5 K), high vacuum (1.0×10-5 Pa), redundant quench detection (voltage, temperature), high-voltage insulation (15 kV), low thermal loads (70 W), lowelectrical joint resistance (2 nΩ), Paschen testing, high-voltage signal measurements, and high-current electronics. The system presented significant challenges for design and analysis, complex manufacturing assembly processes, measurement and control, and stringent quality and safety requirements. [ABSTRACT FROM AUTHOR]

A key challenge for a future circular collider (FCC) with centre-of-mass energy of 100 TeV and a circumference in the range of 100 km is the development of high-field superconducting accelerator magnets, capable of providing a 16 T dipolar field of accelerator quality in a 50 mm aperture. This paper summarizes the strategy and actions being undertaken in the framework of the FCC 16 T Magnet Technology Program and the Work Package 5 of the EuroCirCol. [ABSTRACT FROM PUBLISHER]

A critical component of the 1.3-GHz nuclear magnetic resonance magnet (1.3 G) program, currently ongoing at the Francis Bitter Magnet Laboratory, Plasma Science and Fusion Center, Massachusetts Institute of Technology, and now approaching its final stage, is the all high-temperature superconductor 800-MHz insert (H800). The insert consists of three nested double-pancake (DP) coils fabricated with 6-mm-wide REBCO conductor. Coil 1, the innermost coil of H800, has already been fabricated and tested at 77 and 4.2 K. In addition, one third of the DPs for Coil 2 have been wound and each DP individually fully tested. Work described here includes details of Coil 1 fabrication: DP winding, DP testing, assembling, joint performance, overbanding, and coil testing; winding details of DPs for Coil 2 and their testing are also included. [ABSTRACT FROM PUBLISHER]

JT-60SA is foreseen in the Broader Approach Agreement as the satellite tokamak for ITER. It uses 18 toroidal field coils, a central solenoid with four modules, and six equilibrium field coils. The coils are all superconducting with forced-flow cooled conductors. Series production of conductors and coils is progressing in Japan and Europe. This paper shows the latest manufacturing activities of the magnet system and its utilities. [ABSTRACT FROM PUBLISHER]

Abstract: The modifying of the JT-60U magnet system to the superconducting coils is progressing as a satellite facility for ITER by both parties of Japanese government and European commission in the Broader Approach agreement. The magnet system requires current supplies of 25.7kA for 18 TF coils and of 20kA for 4 CS modules and 6 EF coils. The magnet system generates an average heat load of 3.2kW at 4K to the cryogenic system. The feeder components connected to the power supply provide current supply. The cooling pipes connected to the cryogenic system provide coolant supply. The instrumentation of the JT-60SA magnet system is used for its operation. [Copyright &y& Elsevier]

Abstract: The upgrade of JT-60U magnet system to superconducting coils (JT-60SA) is progressing by both parties of Japanese government and European commission in the framework of the Broader Approach agreement. The magnet system for JT-60SA consists of 18 Toroidal Field (TF) coils, a Central Solenoid (CS) with four modules, six Equilibrium Field (EF) coils. The TF coil case encloses the winding pack and is the main structural component of the magnet system. The CS consists of four independent winding pack modules, which is support from the bottom of the TF coils. The six EF coils are attached to the TF coil cases through supports with flexible plates allowing radial displacements. The construction of CS and EF coils was started in 2008 by Japan Atomic Energy Agency (JAEA). The construction of TF coils will be started in 2009 by Fusion for Energy and European voluntary contributors. This paper introduces the design of the JT-60SA superconducting magnet system and activities for development of magnet components in Japan. [ABSTRACT FROM AUTHOR]

The High Magnetic Field Laboratory, Chinese Academy of Sciences is developing a 40 T hybrid magnet. The hybrid magnet cryostat consists of two separate but attached cryostats. The main function of the cryostats is to provide a thermal barrier between the ambient temperature experimental hall and the supercritical helium forced cooled superconducting magnet. It also provides feed-through penetrations for all the connecting elements inside and outside the cryostat. The Outsert Magnet Cryostat is a large vacuum vessel with cylindrical shell, standard elliptical top, and flat bottom. The structural analyses, including buckling, for the cryostat vessel have been carried out using finite element code. Stress analysis results show that the maximum Von Mises stress will be below the allowable value. In this paper, we focus on the structural analyses and design of the cryostat. [ABSTRACT FROM AUTHOR]

Feasibility of industrial production of MgB2 cables and magnets has been established, thus leading to MRI systems realization. Apart from continuing the development in performances of both cable and magnet, a further important step consists in applying superconductive junctions to windings, to obtain a better field stability. In 2006 a technique to obtain some tens of Ampere in persistent mode operation in a joined MgB2 cable was found. Since then, short windings were repetitively built to test the progress of the performances of the junctions. Among them, a single junction, five meter long windings with a diameter of 260 millimeter were put in persistent mode (i.e. with total resistance less than 10-14 Ohm) with 300 Ampere circulating at 20 Kelvin, self-field; also windings with two junctions and about one meter long with the same diameter were put in persistent mode with 200 Ampere circulating at 20 Kelvin, self-field. [ABSTRACT FROM AUTHOR]

This paper presents the main areas of magnet R&D for a LHC Luminosity Upgrade carried on through the LHC Accelerator Research Program (LARP). Development of Nb3 Sn high gradient, large aperture quadrupoles is taking place at Berkeley, Fermilab, and Brookhaven. [ABSTRACT FROM AUTHOR]

The Next European Dipole (NED) Consortium is working to develop the technology of high field, dipole magnets for a future luminosity upgrade of the LHC at CERN. The proposed magnet will be a large aperture (88 mm), high field (15 T) superconducting dipole magnet using Nb3 Sn Rutherford cable and a wind-and-react manufacturing scheme. The magnet geometry (cosine-theta), scale and forces present real challenges for the design of the mechanical structure and the magnet assembly methods. This paper reports on the mechanical design studies carried out during the first phase of the NED project (2004 to 2007). This paper describes the development of a full 2-D mechanical Finite Element model of the dipole magnet including the superconducting coil, the collars, the iron yoke structure and the outer support cylinder. The model has been qualified and used to study the stress levels in the coil at assembly, cooldown and powering. Due to the strain sensitivity of Nb3 Sn conductors, a primary objective has been to limit the compressive stress in the superconducting cable to 150 MPa at full field. [ABSTRACT FROM AUTHOR]

A new plasma fusion experiment, Wendelstein 7-X (W7-X), is built in the Max-Planck Institute for Plasma Physics in Greifswald (IPP), Germany. This experiment employs superconducting coils, allowing for plasma discharges up to 30 minutes duration. W7-X will be an "optimized" stellarator with respect to plasma transport and stability. The W7-X magnet consists of 70 individual coils in a toroidal arrangement. Each coil of W7-X is thoroughly tested before installation in a cryogenic test facility at the Commissariat a l'Energie Atomique (CEA) in Saclay, France. The tests are essential, because no access is foreseen to the magnetic system during the entire operation period of W7-X. The test procedure will be described briefly, and some test results will be presented. [ABSTRACT FROM AUTHOR]

The magnet system comprises sixteen toroidal field (TF) coils and fourteen poloidal field (PF) coils for KSTAR (Korea Superconducting Tokamak Advanced Research) Tokamak. All the TF coils and 10 PF coils (PF1~ 5 UL) are made of Nb3 Sn strands and 4 PF coils (PF6 ~ 7 UL) are made of NbTi strands. Before operating the superconducting coils, it is critical to verify the operation conditions such as thermo-hydraulic parameters and stability boundaries. In this regards, the TF model coil and CSMC (Central Solenoid Model Coil) have been tested and the operating conditions have been analyzed. Before cool down, parameters such as helium flow through conduits, electrical insulation and coil geometry have been measured at room temperature to confirm the manufacturing soundness. During cool down and current charging, thermo-hydraulic and mechanical parameters by using mechanical sensors have been measured. Also measured was the magnetic field strength in various positions of the coil conductor. Measured data have been analyzed and the results have been compared with the model analysis by simulation code. [ABSTRACT FROM AUTHOR]

In the conventional conveyance system, noise, friction and vibration occur under operation. We have developed the hybrid magnetically levitated system. In this system, pinning force of high temperature bulk super conductor is used for the levitation and guidance. This system needs no control system for levitation and guidance. To increase levitation force, repulsive force of the permanent magnet is used. The method of the propulsion for this hybrid conveyance system is considered. The basic design and propulsion method is shown. Influence of the propulsion system on pinning force, levitation and guidance characteristics of the carrier is shown. The carrier shows stable levitation using the new propulsion method. [ABSTRACT FROM AUTHOR]

An Nb3Sn planar undulator demonstration magnet is under development at the NHMFL. Key technological aspects include a 15 mm period, a target of 0.8 T on the beam and a beam tube that is thermally isolated from the windings. Two yoke assembly procedures are explored. First, a modular approach in which each racetrack is wound, reacted and impregnated separately before assembly with iron pole pieces and the creation of joints between the racetracks. The second approach is based on the more traditional single-piece yoke on which the conductor is wound on a fully iron yoke, followed by heat treatment and impregnation of the entire assembly. Each approach is used to build a 10-racetrack coil; both coils are tested at 4.2 K in liquid helium. Results of the coil tests are discussed, as well as joint development and testing, leading to a choice of assembly method for the demonstration magnet. [ABSTRACT FROM AUTHOR]

The ATLAS Experiment at LHC, CERN will utilize a large, superconducting, air-cored toroidal magnet system with a long Barrel Toroid and two End Cap Toroids. Each End Cap Toroid will contain eight racetrack coils mounted as a single cold mass in a cryostat vessel of approximately 10 m diameter and 5 m width. The toroids provide the magnetic field for the muon detectors. The operating current is 20.5 kA at 0.25 GJ stored energy and a peak field of 4.1 T in the windings. This paper presents the status of the End Cap Toroid Project. Cold mass assembly and the integration of the full cold mass, 120 tons, into the vacuum cryostat for the first toroid are described. The specialized techniques, procedures and tooling infrastructure required for these operations are explained. The pre-installation cooldown to 77 K at the ATLAS cryogenic test facility is reported and the toroid installation in the ATLAS Experiment 100m underground in the ATLAS cavern will be reviewed. [ABSTRACT FROM AUTHOR]

Development of high-performance Nb3Sn quadrupoles is one of the major goals of the LHC Accelerator Research Program (LARP). As part of this program, long racetrack magnets are being made in order to check that the change in coil length that takes place during reaction is correctly accounted for in the quadrupole design and to check for length effects in implementing the ‘shell’ method of coil support. To check the racetrack magnet manufacturing plan, a short racetrack magnet is being made. This magnet will be the first to use restack-rod process Nb3Sn, making it a ‘long sample’ test vehicle for this new material. The paper reports the reaction and characterization of the Nb3Sn, and construction features and test results from the short racetrack magnet. The paper also reports on the status of the construction of the first long racetrack magnet. [ABSTRACT FROM AUTHOR]

In 2004, the US DOE established the LHC Accelerator Research Program (LARP) with the goal of developing a technology base for future upgrades of the LHC. The focus of the magnet program, which is a collaboration of three US laboratories, BNL, FNAL and LBNL, is an development of high gradient quadrupoles using Nb3Sn superconductor. Other program components address issues regarding magnet design, radiation-hard materials, long magnet scale-up, quench protection, fabrication techniques and conductor and cable R&D. This paper presents an overall view of the program with emphasis on the current quadrupole project and outlines the long-term goals of the program. [ABSTRACT FROM AUTHOR]

The strain in a high field Nb3Sn coil was measured during magnet assembly, cool-down, excitation and spot heater quenches. Strain was measured with a full bridge strain gauge mounted directly over the turns and impregnated with the coil. Two such coils were placed in a "common coil" fashion capable of reaching 11 T at 4.2 K. The measured steady state strain in the coil is compared with results obtained using the FEM code ANSYS. During quenches, the transient strain (due to temperature rise) was also measured and compared with the calculated mechanical time response to a quench. [ABSTRACT FROM AUTHOR]

A measurement system for the detection of small magnetic flux changes in superconducting magnets, which are due to either mechanical motion of the conductor or flux jump, has been developed at Fermilab. These flux changes are detected as small amplitude, short duration voltage spikes, which are ∼15 mV in magnitude and lasts for ∼ 30 μsec. The detection system combines an analog circuit for the signal conditioning of two coil segments and a fast data acquisition system for digitizing the results, performing threshold detection, and storing the resultant data. The design of the spike detection system along with the modeling results and noise analysis will be presented. Data from tests of high field Nb3Sn magnets at currents up to ∼20 KA will also be shown. [ABSTRACT FROM AUTHOR]

Special individually powered superconducting quadrupoles are required for the LHC insertions. These units comprise quadrupole magnets of the MQM and MQY types and range in length from 5.4 m to 11.4 m. In total, 82 insertion quadrupoles will be assembled at CERN. In this paper we present the advance in construction of the magnets and report on the performance of the first series built units, including power tests and alignment of the cold masses. [ABSTRACT FROM AUTHOR]

Abstract: The paper describes the software of the standalone control system for 49-poles superconducting wiggler with magnetic field 3.5T. This wiggler was fabricated in Budker INP for ELETTRA Storage Ring (Trieste, Italy). The description of instrumentation is brief. Unlike this, the software description is more detailed, as software basically determines functional capabilities of standalone system. Described software consists of two parts: embedded part operating in VME controller and high-level part operation on host machine. Embedded part is the main part of the software. It provides the interactions with the hardware and realizes all algorithms for MSCW control. Host software organizes user interface. [Copyright &y& Elsevier]

Abstract: The Advanced Light Source (ALS) is a third generation synchrotron light source at Lawrence Berkeley National Laboratory (LBNL). There was an increasing demand for additional high brightness hard X-ray beamlines in the 7–40keV range, so in August 2001, three 1.3T normal conducting bending magnets were removed from the storage ring and replaced with 5T superconducting magnets (Superbends). The radiation produced by these Superbends is an order of magnitude higher in photon brightness and flux at 12keV, making them excellent sources of hard X-rays for protein crystallography and other hard X-ray applications. The Superbends did not compromise the performance of the facility in the VUV and soft X-ray regions of the spectrum. The Superbends will eventually feed 12 new beam lines, greatly enhancing the facility''s capability and capacity in the hard X-ray region. The Superbend project is the biggest upgrade since the ALS storage ring was commissioned in 1993. In this paper we present an overview of the Superbend project, its challenges and the resulting impact on the ALS. [Copyright &y& Elsevier]

ATLAS is one of the two experiments dedicated the search of the Higgs boson, which will be installed on the LHC ring at CERN in 2006. The ATLAS Barrel Toroid air-core magnet (BT) is 20 m in diameter and consists of 8 superconducting coils, each one 25 m long and 5 m wide. After several years of technological development, the major concepts have been proved in 1999/2000 during the construction of the BO prototype; a technological model for BT. The delivery by several European industrial companies of all the major components for BT is nearly finished. The eight BT coils are now being integrated at CERN. The paper presents a general overview of the component manufacturing and integration progress. A special emphasis is put on the major component delivery (conductor, double pancake windings, aluminum coil casing and cryostat) together with a description of the two phases of the integration process: integration of the windings into their coil casings and integration of the cold mass into the vacuum vessel. The integration of the windings in their coil casings will be completed in October 2003. The closure of the first cryostat is planned for the end of the year. The start of the first cold test and the assembly in the cavern is foreseen for the beginning of 2004. [ABSTRACT FROM AUTHOR]

The LHC comprises eight insertions, four of which are dedicated to the experiments while the others are used for major collider systems. The various functions of the insertions are fulfilled by a variety of magnet systems, most of them based on the technology of NbTi superconductors cooled by superfluid helium at 1.9 K. In this paper, we review the concepts underlying the design of the LHC insertions, and describe the corresponding design of the various specialized magnet systems. A status of the procurement of the magnets is given, and plans for their installation and commissioning reviewed. [ABSTRACT FROM AUTHOR]

A series of proton energy-deposition experiments was conducted to measure the energy deposited in a copper target located downstream and off-axis of a high-energy proton-radiography target. The proton/target interactions involved low-intensity bunches of protons at 24 GeV/c onto a spherical target consisting of concentric shells of tungsten and copper. The energy-deposition target was placed at five locations downstream of the proton-radiography target, off-axis of the primary beam transport, and was either unshielded or shielded by 5 or 10 cm of lead. Maximum temperature rises measured in the energy-deposition target due to single bunches of 5×1010 protons on the proton-radiography target were approximately 20 mK per bunch. The data indicated that the scattered radiation was concentrated close to the primary transport axis of the beam line. The energy deposited in the energy-deposition target was reduced by moving the target radially away from the primary transport axis. Placing lead shielding in front of the target further reduced the energy deposition. The measured temperature rises of the energy-deposition target were empirically correlated with the distance from the source, the number of protons incident on the proton-radiography target, the thickness of the lead shielding, and the angle of the energy-deposition target off-axis of the beam line from the proton-radiography target. The correlation of the experimental data that was developed provides a starting point for the evaluation of the shielding requirements for devices downstream of proton-radiography targets such as superconducting magnets. [Copyright &y& Elsevier]

As part of the Jefferson Lab 12 GeV upgrade, the Hall B CLAS12 system requires two superconducting iron-free magnets — a torus and a solenoid. The physics requirements to maximize space for the detectors guided engineers toward particular coil designs for each of the magnets which, in turn, led to the choice of using conduction cooling. The torus consists of 6 trapezoidal NbTi coils connected in series with an operating current of 3770 A. The solenoid is an actively shielded 5 T magnet consisting of 5 NbTi coils connected in series operating at 2416 A. Within the hall, the two magnets are located in close proximity to each other and are completely covered both inside and outside by particle detectors. Stringent size limitations were imposed for both magnets and introduced particular design and fabrication challenges. This paper describes the design, construction, installation, commissioning, and operation of the two magnets. [ABSTRACT FROM AUTHOR]