Search

Inverse magnetron injection gun (IMIG) provides several advantages over simple MIG especially in high-power, high-frequency gyrotron. Sub-millimeter (>230 GHz), high-power (≥1 MW) gyrotrons would be required in futuristic plasma fusion machines to fulfill the need of tens of megawatt RF power for electron cyclotron resonance heating. Here, in this paper, an IMIG is designed for 0.24-THz, 1-MW gyrotron. First, the tradeoff design equations and technical constraints are used to synthesize the electrodes geometry and electrical parameters of IMIG. This synthesized IMIG model is further simulated to finalize the design using electron trajectory code EGUN. Simultaneously, the magnet system including the auxiliary gun coils and superconducting magnets (SCM) is also designed and the obtained magnetic field profile is used in the IMIG simulations. In the case of high-power MIG, the suppression of the beam halo is a major design concern and analyzed critically in the present IMIG design. The shape of the modulating anode and main anode is optimized to make a beam halo shielding. This IMIG is designed for a very high-order mode (TE46,17) simple cylindrical cavity, which confines the range of the tolerance in the electron beam parameters. So, a detailed parametric and misalignment analysis is also performed with respect to the electron beam parameters, such as pitch factor, velocity spread, and guiding center radius spread. These parametric and misalignment analyses would be utter helpful in the fabrication, assembling and testing of the IMIG as well as gyrotron. [ABSTRACT FROM AUTHOR]

In this paper, the design and development of magnetron injection gun (MIG) for 170 GHz, 1-MW gyrotron have been presented. The triode-type MIG at 80-kV beam voltage and 40-A beam current has been designed and developed. A gun-collector test module for 170-GHz gyrotron has been developed and vacuum processed at 400 °C with continuous 48 h operation. The cathode activation and high-voltage breakdown testing have also been carried out up to desired rating. The simulation result of MIG by EGUN has been validated with 2-D-code TRAK. [ABSTRACT FROM AUTHOR]

Magnetron injection gun (MIG) is an important and critical part of any gyrotron. The overall performance of gyrotron deeply depends on the quality of gyrating electron beam. In this article, the design of triode type magnetron injection gun for 200 GHz frequency tunable gyrotron is discussed. It is planned to design and develop a 200 GHz gyrotron for 300 MHz DNP-NMR spectroscopy. The triode MIG is designed in such a way that it can be used in 200 GHz gyrotron of higher RF power for other applications also such as electron spin resonance, imaging. First, geometrical and electrical parameters of MIG are calculated using trade-off and scaling equations. Based on the calculated parameters, further, electron beam trajectory simulations are performed in EGUN. The geometry of electrodes are optimized through numerous simulation iterations to achieve the required beam parameters, such as, minimum spread in velocity and guiding center radius, an optimum value of velocity ratio (1.3–1.5), guiding center radius as per the maximum beam-wave coupling strength. The magnet system is designed to achieve the smooth Gaussian type of magnetic field profile with peak value of 7.35 T at cavity center. Further detail parametric analyses are performed which would be helpful in the frequency tuning and long-time stable operation of gyrotron device. [ABSTRACT FROM PUBLISHER]

In this paper, we present the RF behavior of conventional cylindrical interaction cavity for 240 GHz, 1 MW gyrotron for futuristic plasma fusion reactors. Very high-order TE mode is searched for this gyrotron to minimize the Ohmic wall loading at the interaction cavity. The mode selection process is carried out rigorously to analyze the mode competition and design feasibility. The cold cavity analysis and beam-wave interaction computation are carried out to finalize the cavity design. The detail parametric analyses for interaction cavity are performed in terms of mode stability, interaction efficiency and frequency. In addition, the design of triode type magnetron injection gun is also discussed. The electron beam parameters such as velocity ratio and velocity spread are optimized as per the requirement at interaction cavity. The design studies presented here confirm the realization of CW, 1 MW power at 240 GHz frequency at TE mode. [ABSTRACT FROM AUTHOR]

Thermal analysis of an L-band 60-kW (continuous-wave) double-ring strapped magnetron for optimizing the design of a cathode support structure and cooling system is presented. This magnetron consists of an oxygen-free copper anode with ten built-in cooling channels and a directly heated tungsten cathode. The operating temperature of the cathode is greater than 2000 ^\circ\C; therefore, proper thermal design of the cathode support structure is essential for reliable operation. The heat convection coefficient for the forced air is estimated by simulations comparing the simulated temperatures for different heat convection coefficients with the measured one. It is observed that the comparison between simulations with measurement is in good agreement for various temperatures from 1000 ^\circ\C to 2000 ^\circ\C when the estimated heat convection coefficient of the forced air is used. [ABSTRACT FROM AUTHOR]

The article presents a study which designed a triode-type magnetron injection gun of a 42-gigahert, 200-kilowatt gyrotron for an Indian TOKAMAK system by applying the code EGUN. The gyrotron is an instrument that can produce high powers at very high frequencies. The estimations are carried out to calculate the parameters connected to the cathode, the magnetic field, and the modulating anode voltage. The study is accomplished with the validation of the design by utilizing another code TRAK.

In this paper, a synthesized design of the magnetron injection gun (MIG) for a 200 kW, 42 GHz gyrotron is presented. The synthesis steps involve the selection of the type of the MIG, the development of the design criteria, the selection of initial design parameters and the development of a program for the estimation of the synthesized parameters for the MIG design. The presented approach estimates the cathode, the beam and the anode parameters, enabling one to build a synthesis model of a complete MIG system. [ABSTRACT FROM AUTHOR]