Search

Magnetron injection gun (MIG) is an important and critical part of any gyrotron. The overall performance of gyrotron deeply depends on the quality of gyrating electron beam. In this article, the design of triode type magnetron injection gun for 200 GHz frequency tunable gyrotron is discussed. It is planned to design and develop a 200 GHz gyrotron for 300 MHz DNP-NMR spectroscopy. The triode MIG is designed in such a way that it can be used in 200 GHz gyrotron of higher RF power for other applications also such as electron spin resonance, imaging. First, geometrical and electrical parameters of MIG are calculated using trade-off and scaling equations. Based on the calculated parameters, further, electron beam trajectory simulations are performed in EGUN. The geometry of electrodes are optimized through numerous simulation iterations to achieve the required beam parameters, such as, minimum spread in velocity and guiding center radius, an optimum value of velocity ratio (1.3–1.5), guiding center radius as per the maximum beam-wave coupling strength. The magnet system is designed to achieve the smooth Gaussian type of magnetic field profile with peak value of 7.35 T at cavity center. Further detail parametric analyses are performed which would be helpful in the frequency tuning and long-time stable operation of gyrotron device. [ABSTRACT FROM PUBLISHER]

Abstract: The electrical design of different components of 1MW, 170GHz gyrotron such as, magnetron injection gun, cylindrical interaction cavity and collector and RF window is presented in this article. Recently, a new project related to the development of 170GHz, 1MW gyrotron has been started for the Indian Tokamak. TE34,10 mode is selected as the operating mode after studied the problem of mode competition. The triode type geometry is selected for the design of magnetron injection gun (MIG) to achieve the required beam parameters. The maximum transverse velocity spread of 3.28% at the velocity ratio of 1.34 is obtained in simulations for a 40A, 80kV electron beam. The RF output power of more than 1MW with 36.5% interaction efficiency without depressed collector is predicted by simulation in single-mode operation at 170GHz frequency. The simulated single-stage depressed collector of the gyrotron predicted the overall device efficiencies>55%. Due to the very good thermal conductivity and very weak dependency of the dielectric parameters on temperature, PACVD diamond is selected for window design for the transmission of RF power. The in-house developed code MIGSYN and GCOMS are used for initial geometry design of MIG and mode selection respectively. Commercially available simulation tools MAGIC and ANSYS are used for beam–wave interaction and mechanical analysis respectively. [Copyright &y& Elsevier]

A triode magnetron injection gun (MIG) is designed for a 1-MW 170-GHz gyrotron, which will be used in an electron cyclotron resonance heating system for the International Thermonuclear Experimental Reactor. The initial design of MIG is performed by using the in-house code MIGSYN. For the electron-beam emission and propagation, the 2-D code EGUN is implemented. The transverse-to-axial velocity ratio \alpha is 1.37, and the transverse velocity spread less than 4% is realized. The results are also validated against two other 2-D and 3-D codes, i.e., TRAK and CST-Particle Studio, respectively, which are in close agreement. From the fabrication and operation point of view, the parametric analysis and misalignment study of electron beam are also performed. [ABSTRACT FROM PUBLISHER]