Search

Axial-flux permanent-magnet machines are used particularly in applications requiring a compact structure. Their disc-shaped topology and axial airgap have led to a variety of configurations including two popular ones: the yokeless and segmented armature (YASA), and the single-stator single-rotor or single-sided machine. In this study, a comprehensive comparative analysis of these configurations is conducted at different magnetic and electric loadings. It is found that at lower loadings, typically employed for air-cooled machines, the torque/ampere characteristics of the YASA machine are almost identical to those of a single-sided machine constructed with half the magnet volume. On the other hand, the single-sided machine outperforms the YASA machine when the magnet volumes in both machines are maintained equal. However, for higher electric loadings, the torque/ampere characteristics of the YASA machine droop significantly less than those of the single-sided machine. This article includes analytical estimations, which are verified with experimentally validated finite element analysis (FEA) simulations. In addition, the impacts of the armature reaction on saturation and the magnetic flux linkage, the magnet losses, and eddy current losses in both machines are also explored. [ABSTRACT FROM AUTHOR]

Axial flux permanent magnet (AFPM) motors are suitable options for solar-powered vehicles due to their compact structure and high torque density. Furthermore, certain types of AFPM machines may be configured without stator cores, which eliminates associated losses and cogging torque and simplifies the manufacturing and assembly. This paper examines two machine designs for use in the solar-powered vehicle of the challenger class—a single rotor, single stator conventional AFPM machine, and a coreless AFPM machine with multiple stator and rotor disks. The response surface methodology (RSM) is utilized for the systematic comparison of the conventional and coreless topologies and to select the optimum designs among several hundreds of candidates. Designs with minimum losses and mass producing required torque with larger air-gap are favored. The performance of the selected designs has been studied via three-dimensional finite element analysis (FEA). The FEA parametric modeling methodology is validated by measurements on three AFPM machines of the conventional and coreless type. [ABSTRACT FROM AUTHOR]

Removing some sections of the stator yoke in a permanent-magnet brushless machine can be beneficial for reducing punching waste and simplifying motor manufacture. However, in some cases, restricting the possible flux paths, in this way, will have a detrimental impact on the torque and air-gap harmonics. This paper discusses the potential implications of modular stator core arrangements and presents the air-gap flux density harmonics and winding factors for potential slot/pole combinations. Finite-element analysis (FEA) simulations are presented to support the analytical calculations. The analysis indicates that the performance reduction from using a modular stator is minimal when the number of slots and poles are similar but drops off substantially when this is not the case. A modular core stator will increase the MMF subharmonics due to the magnet field but can reduce the subharmonics due to the armature if a single-layer winding is used. The effect of slotting is very similar for a modular and conventional core machine, and FEA results match previously published analytical analyses. [ABSTRACT FROM PUBLISHER]