Search

Magnetic Resonance Imaging linear-accelerator (MRI-linac) equipment has recently been introduced to multiple centres in Australia and New Zealand. MRI equipment creates hazards for staff, patients and others in the MR environment; these hazards must be well understood, and risks managed by a system of environmental controls, written procedures and a trained workforce. While MRI-linac hazards are similar to the diagnostic paradigm, the equipment, workforce and environment are sufficiently different that additional safety guidance is warranted. In 2019 the Australasian College of Physical Scientists and Engineers in Medicine (ACPSEM) formed the Magnetic Resonance Imaging Linear-Accelerator Working Group (MRILWG) to support the safe clinical introduction and optimal use of MR-guided radiation therapy treatment units. This Position Paper is intended to provide safety guidance and education for Medical Physicists and others planning for and working with MRI-linac technology. This document summarises MRI-linac hazards and describes particular effects which arise from the combination of strong magnetic fields with an external radiation treatment beam. This document also provides guidance on safety governance and training, and recommends a system of hazard management tailored to the MRI-linac environment, ancillary equipment, and workforce., (© 2023. The Author(s).)

THE ARTS The Painter’s Papers A prairie mystic in his own words Kelvin Browne Lionel LeMoine FitzGerald was quiet in person but demonstrative in writing.David Parkins Some Magnetic Force: Lionel [...]

While mounting evidence indicates that a phylogenetically diverse group of animals detect Earth-strength magnetic fields, a magnetoreceptor has not been identified in any animal. One possible reason that identifying a magnetoreceptor has proven challenging is that, like many research fields, magnetoreception research lacks extensive independent replication. Independent replication is important because a subset of studies undoubtedly contain false positive results and without replication it is difficult to determine whether the outcome of an experiment is a false positive. However, we report here a reanalysis of a well-cited paper on honeybee magnetoreception demonstrating that the original paper represented a false positive finding caused by incorrect estimates of probability. We also point out how good experimental design practices could have revealed the error prior to publication. Hopefully, this reanalysis will serve as a reminder of the importance of good experimental design in order to reduce the likelihood of publishing false positive results., Competing Interests: Competing interestsThe authors declare no competing or financial interests., (© 2018. Published by The Company of Biologists Ltd.)

In this work, we report a unique and facile approach to the manufacture of fluorine-free superamphiphobic paper. Based on the principle that Fe3O4 nanoparticles (NPs) arranged along the direction of a magnetic field, the mixture of Fe3O4 NPs and polydimethylsiloxane (PDMS) was coated on kraft paper through self-assembly and thermal-curing at a high temperature in a magnetic field, fabricating a mushroom-like microstructure on the paper. At an Fe3O4 NPs content of 75%, the radius of the mushroom-like pillar caps (RCAP) and center-to-center spacing between two pillars (S) obtained the optimal size of 37 ± 18 μm and 237 ± 38 μm, respectively. The oil-contact angle and water-contact angle of the fabricated paper were up to 156° and 160.4°, respectively. It also showed excellent oleophobic stability; the oil-contact angle was still maintained at 141.9° after 1 h. In addition, the contact angles of milk, ethylene glycol and castor oil were all above 150°, and the contact angle of diiodomethane was 134.2°. Moreover, the sample showed great oil resistance with a kit rating value of 12/12 and permeability of 1800+ s. [ABSTRACT FROM AUTHOR]

Paper based lateral flow systems are widely used biosensor platforms to detect biomolecules in a liquid sample. Proteins, bacteria, oligonucleotides, and nanoparticles were investigated in the literature. In this work we designed a magnetic platform including dual magnets and tested the flow of micron size immunomagnetic particles alone and when loaded with cells on two different types of papers. The prewetting conditions of the paper and the applied external magnetic field are the two dominant factors affecting the particle and cell transport in paper. The images recorded with a cell phone, or with a bright field optical microscope were analyzed to measure the flow of particles and cells. The effect of prewetting conditions and magnetic force were measured, and it was shown that in the worst case, minimum 90% of the introduced cells reached to the edge of the paper. The paper based magnetophoretic lateral flow systems can be used for cell assays. [ABSTRACT FROM AUTHOR]

In this paper, the standing magnetohydrodynamic slow waves in the magnetic flux tubes are investigated under coronal conditions. The temperature and equilibrium plasma density of the tube is assumed to be homogeneous and constant and the compressive viscosity is considered as the damping mechanism. Also, the plasma flow is considered in the flux tube. Assuming that the damping rate to be much smaller than the oscillation frequency of the waves, the perturbation method is used to solve the problem. The oscillation frequency and the eigenfunctions are found from the first-order perturbation while the damping rate is determined from the second-order perturbation. To increase the flow speed makes the oscillation frequency decreases and the damping rate increases. Also, increasing each of the flow speed and background temperature of the tube, decreases the ratio of the damping time to the oscillation period. But this ratio increases due to the increasing the length of the tube The results found here are consistent with the theoretical results obtained earlier. Also, the obtained results can justify some observational cases.

In this work, we describe the synthesis of novel electrically and magnetically dual-driven Janus particles for a handwriting-enabled twisting ball display via the microfluidic technique. One hemisphere of the Janus particles contains a charge control agent, which allows the display color to be controlled by applying a voltage and superparamagnetic nanoparticles, allows handwriting by applying a magnetic field to the display. We fabricated a twisting ball display utilizing these Janus particles and tested the electric color control and handwriting using a magnet. As a result, the display was capable of permitting handwriting with a small magnet in addition to conventional color control using an applied voltage (80 V). Handwriting performance was improved by increasing the concentration of superparamagnetic nanoparticles and was determined to be possible even when 80V was applied across the electrodes for 4 wt.% superparamagnetic nanoparticles in one hemisphere. This improvement was impossible when the concentration was reduced to 2 wt.% superparamagnetic nanoparticles. The technology presented in our work can be applied to low-cost, lightweight, highly visible, and energy-saving electronic message boards and large whiteboards because the large-size display can be fabricated easily due to its simple structure. [ABSTRACT FROM AUTHOR]

Some errors exist in the above paper. [ABSTRACT FROM AUTHOR]

The effects of the helical trajectories of the perturbing electrons in magnetized plasmas on the dynamical Stark width of hydrogen or deuterium spectral lines have been studied analytically in our previous two papers—specifically in the situation where the magnetic field B is so strong that the dynamical Stark width of these lines reduces to the so-called adiabatic Stark width because the so-called nonadiabatic Stark width is completely suppressed. This situation corresponds, for example, to DA and DBA white dwarfs. We obtained those analytical results by using the formalism of the so-called conventional (or standard) theory of the impact Stark broadening: namely, by performing calculations in the second order of the Dyson perturbation expansion. The primary outcome was that the dynamical Stark broadening was found to not depend on the magnetic field B (for sufficiently strong B). In the present paper, we use the O4 symmetry of hydrogen atoms for performing the corresponding non-perturbative analytical calculations equivalent to accounting for all orders of the Dyson perturbation expansion. The results, obtained by using the O4 symmetry of hydrogen atoms, differ from our previous ones not only quantitatively, but—most importantly—qualitatively. Namely, the dynamical Stark broadening does depend on the magnetic field B, even for strong B. These results should be important for revising the interpretation of the hydrogen Balmer lines observed in DA and DBA white dwarfs. We also address confusion in the literature on this subject. [ABSTRACT FROM AUTHOR]

This paper presents a brief overview of the use of magnetic field in studying droplet adhesion to a fiber or a fibrous surface. The paper starts by discussing ways to quantify the force required to detach a droplet from a fiber for its applications in coalescence filtration, i.e., removal of dispersed droplets from a gaseous or liquid flow using a fibrous filter. It then continues to discuss droplet detachment from a fibrous surface or penetrating into a thin fibrous coating. The emphasis is put on a recently develop magnetic approach for measuring force of detachment and on its novel simplicity and non-intrusive nature in the context of existing droplet detachment methods. Our review also includes a discussion on force of detachment for multiphase droplets comprised of two immiscible liquids, i.e., compound droplets. Atomistic- and continuum-level numerical simulations pertaining to droplet detachment are also discussed throughout the paper when appropriate. [ABSTRACT FROM AUTHOR]

Some errors exist in the above paper. [ABSTRACT FROM AUTHOR]

Some serious errors exist in the above paper. [ABSTRACT FROM AUTHOR]