Search

Thermal interface materials (TIMs) with high through-plane thermal conductivity are urgently desired to avoid overheating of high-power density electronics. Introducing and aligning fillers in polymer matrixes via magnetic field is a promising method to improve the thermal conductivity of the polymer. However, either the fillers need to be modified with magnetic particles or a strong magnetic field is needed for good alignment in high filler content. This prevents further improvement of the through-plane thermal conductivity. Herein, mesophase pitch-based carbon fibers (MPCFs) with a content as high as 76 wt.% are aligned vertically in water-soluble polyvinyl alcohol (PVA) under a low magnetic field (∼ 0.4 T), forming a vertically aligned MPCF (VAMPCF)/PVA composite with an extraordinary through-plane thermal conductivity of 86 W/(m·K), which is higher than that of many alloys. In addition, both theoretical and experimental results demonstrate that the critical intensity of the magnetic field needed for good alignment of the fillers depends on their size and magnetic susceptibility. Furthermore, the water solubility of PVA makes it easy to recycle MPCFs. This study offers an inspired venue to develop excellent and eco-friendly TIMs to meet ever increasing demand in heat dissipation for electronics. [ABSTRACT FROM AUTHOR]

With the continuous advancement of electronic devices, there is an urgent need for advanced thermal interface materials (TIMs) to prevent high-power density electronics from overheating. The orderly arrangement of thermally conductive fillers in TIMs plays a crucial role in enhancing thermal conduction along preferred directions. However, it is challenging to control the orientation of the fillers, especially for two-dimensional fillers. In this study, graphene nanoplates (GNPs) were co-planarly arranged in polyvinyl alcohol (PVA) using a rotating magnetic field, which significantly increased the thermal conductivity of the composites. The coplanar vertically aligned GNPs/PVA (CVGNPs/PVA) exhibited a through-plane thermal conductivity of 11.78 W m−1 K−1, which is about 10 times higher than that of the composites with disorderly distributed GNPs (1.14 W m−1 K−1). The rotating magnetic field facilitated the alignment of GNPs and increased face-to-face contact between adjacent GNPs, which significantly boosted the through-plane thermal conductivity of the composite. The compressive modulus of the CVGNPs/PVA composites was only 1.06 MPa, and it helped to reduce the thermal interface resistance to 49 mm2 K W−1. These results offer a novel approach for preparing excellent TIMs that could be used in various applications. GNPs are oriented more compactly and orderly in PVA by using the rotating magnetic field, resulting in a densified thermal conductive paths and higher thermal conductivity of the composite. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Magnetized carbon fibers (MCF) were vertically arranged in silicone rubber (SR) in magnetic field. • The λ of SR composites demonstrated an unusual power-law growth with the increase of MCF. • The o-MCF/SR-9 vol% composite exhibited a high λ of 4.72 W/(m·K) with 2045.5 % enhancement. • A new parameter, "shape factor", was introduced to reveal the heat conduction mechanism. The continual increase in power density and consumption of modern electronic devices calls for high-performance thermal interface materials (TIMs). In this work, silicone rubber composites with vertically oriented magnetic carbon fibers (o-MCF/SR) were successfully prepared via the cast molding and filler orientation upon uniform magnetic field in a vacuum environment. The through-plane thermal conductivity of o-MCF/SR composites showed an unusual power-law growth with increasing MCF loading. At a 9 vol% MCF loading, the o-MCF/SR composite exhibited a maximum through-plane thermal conductivity of 4.72 W/(m·K) with 2045.5 % TCE, about 3.55 W/(m·K) higher than that of SR composites with randomly dispersed MCF (λ = 1.17 W/(m·K), TCE = 431.8 %). To reveal the underlying through-plane heat conduction mechanism of o-MCF/SR composites, finite element simulation combined with classical effective medium theory model and machine learning method was used. A homogeneous unit fiber-filled composite (HUFC) was modelled, and a new parameter influencing the through-plane thermal conductivity, i.e. , shape factor (b / a), was introduced here for the first time. Theoretically, this shape factor was dependent on the filler content and indirectly reflected the assembly of matrix and 1D filler in HUFC fit to a parallel-series hybrid model. Furthermore, a decrease of b / a was practically found with increasing MCF loading, and the dominant series-type assembly gradually transformed to parallel-type assembly of the o-MCF/SR composites. This work not only developed a method to fabricate desirable TIMs that hold great promise for advanced thermal management, but also introduced a new parameter to reveal the underlying mechanism for heat conduction capacity of polymer composites. [ABSTRACT FROM AUTHOR]