Search

The monitoring and evaluating the physical and physiological quality of seeds throughout storage requires technical and financial resources and is subject to sampling and laboratory errors. Therefore, machine learning (ML) techniques could help optimize the processes and obtain accurate results for decision-making in the seed storage process. This study aimed to analyze the performance of ML algorithms from variables monitored during seed conditioning (temperature and packaging) and storage time to predict the physical and physiological quality of stored soybean seeds. Data analysis was performed using the Artificial Neural Networks, decision tree algorithms REPTree and M5P, Random Forest, and Linear Regression. In predicting seed quality, the combination of the input variables temperature and storage time for REPTree and Random Forest algorithms outperformed the linear regression, providing higher accuracy indices. Among the most important results, it was observed for apparent specific mass that T + P + ST, T + ST, P + ST, and ST had the highest r means and the lowest MAE means, however, Person's r coefficient for these inputs was 0.63 and the MAE between 9.59 to 10.47. The germination results for inputs T + P + ST and T + ST had the best results (r = 0.65 and r = 0.67, respectively) in the ANN, REPTree, M5P and RF models. Using computational intelligence algorithms is an excellent alternative to predict the quality of soybean seeds from the information of easy-to-measure variables., (© 2022. The Author(s).)

Making plant breeding programs less expensive, fast, practical, and accurate, especially for soybeans, promotes the selection of new soybean genotypes and contributes to the emergence of new varieties that are more efficient in absorbing and metabolizing nutrients. Using spectral information from soybean genotypes combined with nutritional information on secondary macronutrients can help genetic improvement programs select populations that are efficient in absorbing and metabolizing these nutrients. In addition, using machine learning algorithms to process this information makes the acquisition of superior genotypes more accurate. Therefore, the objective of the work was to verify the classification performance of soybean genotypes regarding secondary macronutrients by ML algorithms and different inputs. The experiment was conducted in the experimental area of the Federal University of Mato Grosso do Sul, municipality of Chapadão do Sul, Brazil. Soybean was sown in the 2019/20 crop season, with the planting of 103 F2 soybean populations. The experimental design used was randomized blocks, with two replications. At 60 days after crop emergence (DAE), spectral images were collected with a Sensifly eBee RTK fixed-wing remotely piloted aircraft (RPA), with autonomous takeoff control, flight plan, and landing. At the reproductive stage (R1), three leaves were collected per plant to determine the macronutrients calcium (Ca), magnesium (Mg), and sulfur (S) levels. The data obtained from the spectral information and the nutritional values of the genotypes in relation to Ca, Mg, and S were subjected to a Pearson correlation analysis; a PC analysis was carried out with a k-means algorithm to divide the genotypes into clusters. The clusters were taken as output variables, while the spectral data were used as input variables for the classification models in the machine learning analyses. The configurations tested in the models were spectral bands (SBs), vegetation indices (VIs), and a combination of both. The combination of machine learning algorithms with spectral data can provide important biological information about soybean plants. The classification of soybean genotypes according to calcium, magnesium, and sulfur content can maximize time, effort, and labor in field evaluations in genetic improvement programs. Therefore, the use of spectral bands as input data in random forest algorithms makes the process of classifying soybean genotypes in terms of secondary macronutrients efficient and important for researchers in the field. [ABSTRACT FROM AUTHOR]

A current challenge of genetic breeding programs is to increase grain yield and protein content and at least maintain oil content. However, evaluations of industrial traits are time and cost-consuming. Thus, achieving accurate models for classifying genotypes with better industrial technological performance based on easier and faster to measure traits, such as agronomic ones, is of paramount importance for soybean breeding programs. The objective was to classify groups of soybean genotypes to industrial technological variables based on agronomic traits measured in the field using machine learning (ML) techniques. Field experiments were carried out in two sites in a randomized block design with two replications and 206 F2 soybean populations. Agronomic traits evaluated were: days to maturation (DM), first pod height (FPH), plant height (PH), number of branches (NB), main stem diameter (SD), mass of one hundred grains (MHG), and grain yield (GY). Industrial technological variables evaluated were oil yield, crude protein, crude fiber, and ash contents, determined by high-optical accuracy near-infrared spectroscopy (NIRS). The models tested were: support vector machine (SVM), artificial neural network (ANN), decision tree models J48 and REPTree, random forest (RF), and logistic regression (LR, used as control). A genotype clustering was performed using PCA and k-means algorithm, and then the clusters formed were used as output variables of the ML models, while the agronomic traits were used as input variables. ML techniques provided accurate models to classify soybean genotypes for more complex variables (industrial technological) based on agronomic traits. RF outperformed the other models and can be used to contribute to soybean breeding programs by classifying genotypes for industrial technological traits. [ABSTRACT FROM AUTHOR]

Plants respond to biotic and abiotic pressures by changing their biophysical and biochemical aspects, such as reducing their biomass and developing chlorosis, which can be readily identified using remote-sensing techniques applied to the VIS/NIR/SWIR spectrum range. In the current scenario of agriculture, production efficiency is fundamental for farmers, but diseases such as target spot continue to harm soybean yield. Remote sensing, especially hyperspectral sensing, can detect these diseases, but has disadvantages such as cost and complexity, thus favoring the use of UAVs in these activities, as they are more economical. The objectives of this study were: (i) to identify the most appropriate input variable (bands, vegetation indices and all reflectance ranges) for the metrics assessed in machine learning models; (ii) to verify whether there is a statistical difference in the response of NDVI (normalized difference vegetation index), grain weight and yield when subjected to different levels of severity; and (iii) to identify whether there is a relationship between the spectral bands and vegetation indices with the levels of target spot severity, grain weight and yield. The field experiment was carried out in the 2022/23 crop season and involved different fungicide treatments to obtain different levels of disease severity. A spectroradiometer and UAV (unmanned aerial vehicle) imagery were used to collect spectral data from the leaves. Data were subjected to machine learning analysis using different algorithms. LR (logistic regression) and SVM (support vector machine) algorithms performed better in classifying target spot severity levels when spectral data were used. Multivariate canonical analysis showed that healthy leaves stood out at specific wavelengths, while diseased leaves showed different spectral patterns. Disease detection using hyperspectral sensors enabled detailed information acquisition. Our findings reveal that remote sensing, especially using hyperspectral sensors and machine learning techniques, can be effective in the early detection and monitoring of target spot in the soybean crop, enabling fast decision-making for the control and prevention of yield losses. [ABSTRACT FROM AUTHOR]

Using multispectral sensors attached to unmanned aerial vehicles (UAVs) can assist in the collection of morphological and physiological information from several crops. This approach, also known as high-throughput phenotyping, combined with data processing by machine learning (ML) algorithms, can provide fast, accurate, and large-scale discrimination of genotypes in the field, which is crucial for improving the efficiency of breeding programs. Despite their importance, studies aimed at accurately classifying sorghum hybrids using spectral variables as input sets in ML models are still scarce in the literature. Against this backdrop, this study aimed: (I) to discriminate sorghum hybrids based on canopy reflectance in different spectral bands (SB) and vegetation indices (VIs); (II) to evaluate the performance of ML algorithms in classifying sorghum hybrids; (III) to evaluate the best dataset input for the algorithms. A field experiment was carried out in the 2022 crop season in a randomized block design with three replications and six sorghum hybrids. At 60 days after crop emergence, a flight was carried out over the experimental area using the Sensefly eBee real time kinematic. The spectral bands (SB) acquired by the sensor were: blue (475 nm, B_475), green (550 nm, G_550), red (660 nm, R_660), Rededge (735 nm, RE_735) e NIR (790 nm, NIR_790). From the SB acquired, vegetation indices (VIs) were calculated. Data were submitted to ML classification analysis, in which three input settings (using only SB, using only VIs, and using SB + VIs) and six algorithms were tested: artificial neural networks (ANN), support vector machine (SVM), J48 decision trees (J48), random forest (RF), REPTree (DT) and logistic regression (LR, conventional technique used as a control). There were differences in the spectral signature of each sorghum hybrid, which made it possible to differentiate them using SBs and VIs. The ANN algorithm performed best for the three accuracy metrics tested, regardless of the input used. In this case, the use of SB is feasible due to the speed and practicality of analyzing the data, as it does not require calculations to perform the VIs. RF showed better accuracy when VIs were used as an input. The use of VIs provided the best performance for all the algorithms, as did the use of SB + VIs which provided good performance for all the algorithms except RF. Using ML algorithms provides accurate identification of the hybrids, in which ANNs using only SB and RF using VIs as inputs stand out (above 55 for CC, above 0.4 for kappa and around 0.6 for F-score). There were differences in the spectral signature of each sorghum hybrid, which makes it possible to differentiate them using wavelengths and vegetation indices. Processing the multispectral data using machine learning techniques made it possible to accurately differentiate the hybrids, with emphasis on artificial neural networks using spectral bands as inputs and random forest using vegetation indices as inputs. [ABSTRACT FROM AUTHOR]

The identification of tree species is very useful for the management and monitoring of forest resources. When paired with machine learning (ML) algorithms, species identification based on spectral bands from a hyperspectral sensor can contribute to developing technologies that enable accurate forest inventories to be completed efficiently, reducing labor and time. This is the first study to evaluate the effectiveness of classification of five eucalyptus species (E. camaldulensis, Corymbia citriodora, E. saligna, E. grandis, and E. urophyla) using hyperspectral images and machine learning. Spectral readings were taken from 200 leaves of each species and divided into three dataset sizes: one set containing 50 samples per species, a second with 100 samples per species, and a third set with 200 samples per species. The ML algorithms tested were multilayer perceptron artificial neural network (ANN), decision trees (J48 and REPTree algorithms), and random forest (RF). As a control, a conventional approach by logistic regression (LR) was used. Eucalyptus species were classified by ML algorithms using a randomized stratified cross-validation with 10 folds. After obtaining the percentage of correct classification (CC) and F-measure accuracy metrics, the means were grouped by the Scott–Knott test at 5% probability. Our findings revealed the existence of distinct spectral curves between the species, with the differences being more marked from the 700 nm range onwards. The most accurate ML algorithm for identifying eucalyptus species was ANN. There was no statistical difference for CC between the three dataset sizes. Therefore, it was determined that 50 leaves would be sufficient to accurately differentiate the eucalyptus species evaluated. Our study represents an important scientific advance for forest inventories and breeding programs with applications in both forest plantations and native forest areas as it proposes a fast, accurate, and large-scale species-level classification approach. [ABSTRACT FROM AUTHOR]

Assessing different levels of red gum lerp psyllid (Glycaspis brimblecombei) can influence the hyperspectral reflectance of leaves in different ways due to changes in chlorophyll. In order to classify these levels, the use of machine learning (ML) algorithms can help process the data faster and more accurately. The objectives were: (I) to evaluate the spectral behavior of the G. brimblecombei attack levels; (II) find the most accurate ML algorithm for classifying pest attack levels; (III) find the input configuration that improves performance of the algorithms. Data were collected from a clonal eucalyptus plantation (clone AEC 0144—Eucalyptus urophilla) aged 10.3 months old. Eighty sample evaluations were carried out considering the following severity levels: control (no shells), low infestation (N1), intermediate infestation (N2), and high infestation (N3), for which leaf spectral reflectances were obtained using a spectroradiometer. The spectral range acquired by the equipment was 350 to 2500 nm. After obtaining the wavelengths, they were grouped into representative interval means in 28 bands. Data were submitted to the following ML algorithms: artificial neural networks (ANN), REPTree (DT) and J48 decision trees, random forest (RF), support vector machine (SVM), and conventional logistic regression (LR) analysis. Two input configurations were tested: using only the wavelengths (ALL) and using the spectral bands (SB) to classify the attack levels. The output variable was the severity of G. brimblecombei attack. There were differences in the hyperspectral behavior of the leaves for the different attack levels. The highest attack level shows the greatest distinction and the highest reflectance values. LR and SVM show better accuracy in classifying the severity levels of G. brimblecombei attack. For the correct classification percentage, the RL and SVM algorithms performed better, both with accuracy above 90%. Both algorithms achieved F-score values close to 0.90 and above 0.8 for Kappa. The entire spectral range guaranteed the best accuracy for both algorithms. [ABSTRACT FROM AUTHOR]

Physical classification is the procedure adopted by the rice unloading, delivery, storage, and processing units for the commercial characterization of the quality of the grains. This step occurs mostly by the conventional method, which demands more time and specialized labor, and the results are subjective since the evaluation is visual. In order to make the operation faster, more accurate, and less dependent, non-destructive technologies and computational intelligence can be applied to characterize grain quality. Therefore, this study aimed to characterize and predict the quality of whole, processed rice grains, as well as classify any defects present. This was achieved by sampling from the upper and lower points of four silo dryers with capacities of up to 40,000 sacks. The grain samples had moisture contents of 16%, 17%, 18%, and 19% and were subjected to drying-aeration until reaching 12% moisture content (w.b.). Near-infrared spectroscopy technology and Machine Learning algorithm models (Artificial Neural Networks, decision tree algorithms Quinlan's algorithm, Random Tree, REPTree, and Random Forest) were employed for this purpose. By analyzing Pearson's correlation statistics, a strong negative correlation (R2 = 0.98) was found between moisture content and the yield of whole grains. Conversely, a strong positive correlation (R2 = 0.97) was observed between moisture content and classified physical defects across the various characterized physicochemical constituents. These findings indicate the effectiveness of near-infrared spectroscopy technology. The Random Tree model (RandT) successfully predicted the grain quality outcomes and is therefore recommended as the model of choice, obtained Pearson's correlation coefficient (r = 0.96), mean absolute error (MAE = 0.017), and coefficient of determination (R2 = 0.92). The results obtained here reveal that the combination of near-infrared spectroscopy technology and Machine Learning algorithm models is an excellent non-destructive alternative to manual physical classification for characterizing the physicochemical quality of whole and defective rice grains. [ABSTRACT FROM AUTHOR]

Using spectral data to quantify nitrogen (N), phosphorus (P), and potassium (K) contents in soybean plants can help breeding programs develop fertilizer-efficient genotypes. Employing machine learning (ML) techniques to classify these genotypes according to their nutritional content makes the analyses performed in the programs even faster and more reliable. Thus, the objective of this study was to find the best ML algorithm(s) and input configurations in the classification of soybean genotypes for higher N, P, and K leaf contents. A total of 103 F2 soybean populations were evaluated in a randomized block design with two repetitions. At 60 days after emergence (DAE), spectral images were collected using a Sensefly eBee RTK fixed-wing remotely piloted aircraft (RPA) with autonomous take-off, flight plan, and landing control. The eBee was equipped with the Parrot Sequoia multispectral sensor. Reflectance values were obtained in the following spectral bands (SBs): red (660 nm), green (550 nm), NIR (735 nm), and red-edge (790 nm), which were used to calculate the vegetation index (VIs): normalized difference vegetation index (NDVI), normalized difference red edge (NDRE), green normalized difference vegetation index (GNDVI), soil-adjusted vegetation index (SAVI), modified soil-adjusted vegetation index (MSAVI), modified chlorophyll absorption in reflectance index (MCARI), enhanced vegetation index (EVI), and simplified canopy chlorophyll content index (SCCCI). At the same time of the flight, leaves were collected in each experimental unit to obtain the leaf contents of N, P, and K. The data were submitted to a Pearson correlation analysis. Subsequently, a principal component analysis was performed together with the k-means algorithm to define two clusters: one whose genotypes have high leaf contents and another whose genotypes have low leaf contents. Boxplots were generated for each cluster according to the content of each nutrient within the groups formed, seeking to identify which set of genotypes has higher nutrient contents. Afterward, the data were submitted to machine learning analysis using the following algorithms: decision tree algorithms J48 and REPTree, random forest (RF), artificial neural network (ANN), support vector machine (SVM), and logistic regression (LR, used as control). The clusters were used as output variables of the classification models used. The spectral data were used as input variables for the models, and three different configurations were tested: using SB only, using VIs only, and using SBs+VIs. The J48 and SVM algorithms had the best performance in classifying soybean genotypes. The best input configuration for the algorithms was using the spectral bands as input. [ABSTRACT FROM AUTHOR]

Predicting maize yield using spectral information, temperature, and different irrigation management through machine learning algorithms provide information in a fast, accurate, and non-destructive way. The use of multispectral sensor data coupled with irrigation management in maize allows further exploration of water behavior and its relationship with changes in spectral bands presented by the crop. Thus, the objective of this study was to evaluate, by means of multivariate statistics and machine learning techniques, the relationship between irrigation management and spectral bands in predicting maize yields. Field experiments were carried out over two seasons (first and second seasons) in a randomized block design with four treatments (control and three additional irrigation levels) and eighteen sample repetitions. The response variables analyzed were vegetation indices (IVs) and crop yield (GY). Measurement of spectral wavelengths was performed with the Sensefly eBee RTK, with autonomous flight control. The eBee was equipped with the Parrot Sequoia multispectral sensor acquiring reflectance at the wavelengths of green (550 nm ± 40 nm), red (660 nm ± 40 nm), red-edge (735 nm ± 10 nm), and NIR (790 nm ± 40 nm). The blue length (496 nm) was obtained by additional RGB imaging. Data were subjected to Pearson correlations (r) between the evaluated variables represented by a correlation and scatter plot. Subsequently, the canonical analysis was performed to verify the interrelationship between the variables evaluated. Data were also subjected to machine learning (ML) analysis, in which three different input dataset configurations were tested: using only irrigation management (IR), using irrigation management and spectral bands (SB+IR), and using irrigation management, spectral bands, and temperature (IR+SB+Temp). ML models used were: Artificial Neural Network (ANN), M5P Decision Tree (J48), REPTree Decision Tree (REPT), Random Forest (RF), and Support Vector Machine (SVM). A multiple linear regression (LR) was tested as a control model. Our results revealed that Random Forest has higher accuracy in predicting grain yield in maize, especially when associated with the inputs SB+IR and SB+IR+Temp. [ABSTRACT FROM AUTHOR]

In soybean, there is a lack of research aiming to compare the performance of machine learning (ML) and deep learning (DL) methods to predict more than one agronomic variable, such as days to maturity (DM), plant height (PH), and grain yield (GY). As these variables are important to developing an overall precision farming model, we propose a machine learning approach to predict DM, PH, and GY for soybean cultivars based on multispectral bands. The field experiment considered 524 genotypes of soybeans in the 2017/2018 and 2018/2019 growing seasons and a multitemporal–multispectral dataset collected by embedded sensor in an unmanned aerial vehicle (UAV). We proposed a multilayer deep learning regression network, trained during 2000 epochs using an adaptive subgradient method, a random Gaussian initialization, and a 50% dropout in the first hidden layer for regularization. Three different scenarios, including only spectral bands, only vegetation indices, and spectral bands plus vegetation indices, were adopted to infer each variable (PH, DM, and GY). The DL model performance was compared against shallow learning methods such as random forest (RF), support vector machine (SVM), and linear regression (LR). The results indicate that our approach has the potential to predict soybean-related variables using multispectral bands only. Both DL and RF models presented a strong (r surpassing 0.77) prediction capacity for the PH variable, regardless of the adopted input variables group. Our results demonstrated that the DL model (r = 0.66) was superior to predict DM when the input variable was the spectral bands. For GY, all machine learning models evaluated presented similar performance (r ranging from 0.42 to 0.44) for each tested scenario. In conclusion, this study demonstrated an efficient approach to a computational solution capable of predicting multiple important soybean crop variables based on remote sensing data. Future research could benefit from the information presented here and be implemented in subsequent processes related to soybean cultivars or other types of agronomic crops. [ABSTRACT FROM AUTHOR]

• Classification of eucalyptus species based on their growth using the K-means method. • Obtaining eucalyptus vegetation indexes (VI) using Unmanned Aerial Vehicles. • Selection of the best VI features for classification of eucalyptus using ANOVA statistical test. • Recognition of eucalyptus in relation to its growth using machine learning methods and VI features. Growth and production models can help to simulate the growth of tree dimensions to predict forest productivity at different levels. In this context, the following questions arise: (i) is it possible to recognize the growth pattern of eucalyptus species based on spectral features using machine learning (ML) for data modeling? (ii) what spectral features provides better accuracy? and (iii) what ML algorithms are most accurate for performing this modeling? To answer these questions, the present study evaluated the use of ML techniques using breast height and total plant height to classify the growth of five species of eucalyptus and Corymbria citriodora in an unsupervised learning, and the obtained classes for induce ML algorithms to recognize the species with relation to their growth using vegetation indices (VIs) and spectral bands (SBs). It were evaluated five eucalyptus species (E. camaldulensis , E. uroplylla, E. saligna , E. grandis e E. urograndis) and C. citriodora in experimental design of randomized blocks with four replicates, with 20 plants inside each experimental plot. The diameter at breast height and total plant height at stand level were obtained by measuring five trees in each experimental unit in seven measurements. During this same period, a flight was carried out using a remotely piloted aircraft for the acquisition of spectral variables (SBs and VIs). For recognition of eucalyptus species in relation to their growth two machine learning approaches were employed: supervised and unsupervised. The average accuracy obtained from 10-fold cross-validation, employing Random Forest algorithm and 24 features, was 0.76. This result shows that the proposed approach is appropriate to recognize different eucalyptus species based on their growth. [ABSTRACT FROM AUTHOR]

Machine learning techniques (ML) have gained attention in precision agriculture practices since they efficiently address multiple applications, like estimating the growth and yield of trees in forest plantations. The combination between ML algorithms and spectral vegetation indices (VIs) from high-spatial-resolution line measurement, segment: 0.079024 m multispectral imagery, could optimize the prediction of these biometric variables. In this paper, we investigate the performance of ML techniques and VIs acquired with an unnamed aerial vehicle (UAV) to predict the diameter at breast height (DBH) and total height (Ht) of eucalyptus trees. An experimental site with six eucalyptus species was selected, and the Parrot Sequoia sensor was used. Several ML techniques were evaluated, like random forest (RF), REPTree (DT), alternating model tree (AT,) k-nearest neighbor (KNN), support vector machine (SVM), artificial neural network (ANN), linear regression (LR), and radial basis function (RBF). Each algorithm performance was verified using the correlation coefficient (r) and the mean absolute error (MAE). We used, as input, 34 VIs as numeric variables to predict DHB and Ht. We also added to the model a categorical variable as input identifying the different eucalyptus trees species. The RF technique obtained an overall superior estimation for all the tested configurations. Still, the RBF also showed a higher performance for predicting DHB, numerically surpassing the RF both in r and MAE, in some cases. For Ht variable, the technique that obtained the smallest MAE was SVM, though in a particular test. In this regard, we conclude that a combination of ML and VIs extracted from UAV-based imagery is suitable to estimate DBH and Ht in eucalyptus species. The approach presented constitutes an interesting contribution to the inventory and management of planted forests. [ABSTRACT FROM AUTHOR]

Under ideal conditions of nitrogen (N), maize (Zea mays L.) can grow to its full potential, reaching maximum plant height (PH). As a rapid and nondestructive approach, the analysis of unmanned aerial vehicles (UAV)-based imagery may be of assistance to estimate N and height. The main objective of this study is to present an approach to predict leaf nitrogen concentration (LNC, g kg−1) and PH (m) with machine learning techniques and UAV-based multispectral imagery in maize plants. An experiment with 11 maize cultivars under two rates of N fertilization was carried during the 2017/2018 and 2018/2019 crop seasons. The spectral vegetation indices (VI) normalized difference vegetation index (NDVI), normalized difference red-edge index (NDRE), green normalized difference vegetation (GNDVI), and the soil adjusted vegetation index (SAVI) were extracted from the images and, in a computational system, used alongside the spectral bands as input parameters for different machine learning models. A randomized 10-fold cross-validation strategy, with a total of 100 replicates, was used to evaluate the performance of 9 supervised machine learning (ML) models using the Pearson's correlation coefficient (r), mean absolute error (MAE), coefficient of regression (R²), and root mean square error (RMSE) metrics. The results indicated that the random forest (RF) algorithm performed better, with r and RMSE, respectively, of 0.91 and 1.9 g.kg−¹ for LNC, and 0.86 and 0.17 m for PH. It was also demonstrated that VIs contributed more to the algorithm's performances than individual spectral bands. This study concludes that the RF model is appropriate to predict both agronomic variables in maize and may help farmers to monitor their plants based upon their LNC and PH diagnosis and use this knowledge to improve their production rates in the subsequent seasons. [ABSTRACT FROM AUTHOR]

[Display omitted] • Hyperspectral reflectance for the levels of Asian soybean rust severity showed differences across the entire electromagnetic spectrum. • Plants with 50% disease severity have a curve close to healthy plants with lower reflectance. • More severely attacked plants have higher reflectance. Traditional monitoring of asian soybean rust severity is a time- and labor-intensive task, as it requires visual assessments by skilled professionals in the field. Thus, the use of remote sensing and machine learning (ML) techniques in data processing has emerged as an approach that can increase efficiency in disease monitoring, enabling faster, more accurate and time- and labor-saving evaluations. The aims of the study were: (i) to identify the spectral signature of different levels of Asian soybean rust severity; (ii) to identify the most accurate machine learning algorithm for classifying disease severity levels; (iii) which spectral input provides the highest classification accuracy for the algorithms; (iv) to determine a sample size of leaves that guarantees the best accuracy for the algorithms. A field experiment was carried out in the 2022/2023 harvest in a randomized block design with a 6x3 factorial scheme (ML algorithms x severity levels) and four replications. Disease severity levels assessed were: healthy leaves, 25 % severity, and 50 % severity. Leaf hyperspectral analysis was carried out over a wide range from 350 to 2500 nm. From this analysis, 28 spectral bands were extracted, seeking to distinguish the spectral signature for each severity level with the least input dataset. Data was subjected to machine learning analysis using Artificial Neural Network (ANN), REPTree (DT) and J48 decision trees, Random Forest (RF), and Support Vector Machine (SVM) algorithms, as well as a traditional classification method (Logistic Regression - LR). Two different input datasets were tested for each algorithm: the full spectrum (ALL) provided by the sensor and the 28 spectral bands (SB). Tests with different sample sizes were also conducted to investigate the algorithms' ability to detect severity levels with a reduced sample size. Our findings indicate differences between the spectral curves for the severity levels assessed, which makes it possible to differentiate between healthy plants with low and high severity using hyperspectral sensing. SVM was the most accurate algorithm for classifying severity levels by using all the spectral information as input. This algorithm also provided high classification accuracy when using smaller leaf samples. This study reveals that hyperspectral sensing and the use of ML algorithms provide an accurate classification of different levels of Asian rust severity, and can be powerful tools for a more efficient disease monitoring process. [ABSTRACT FROM AUTHOR]

[Display omitted] • Soybean genotypes were grouped according to their grain yield and industrial traits. • Support Vector Machine and J48 algorithms performed better at classifying them. • Using the spectral bands selected in the study improved the classification accuracy of the algorithms. Employing visible and near infrared sensors in high-throughput phenotyping provides insight into the relationship between the spectral characteristics of the leaf and the content of grain properties, helping soybean breeders to direct their program towards improving grain traits according to researchers' interests. Our research hypothesis is that the leaf reflectance of soybean genotypes can be directly related to industrial grain traits such as protein and fiber contents. Thus, the objectives of the study were: (i) to classify soybean genotypes according to the grain yield and industrial traits; (ii) to identify the algorithm(s) with the highest accuracy for classifying genotypes using leaf reflectance as model input; (iii) to identify the best input data for the algorithms to improve their performance. A field experiment was carried out in randomized block design with three replications and 32 soybean genotypes. At 60 days after emergence, spectral analysis was carried out on three leaf samples from each plot. A hyperspectral sensor was used to capture reflectance between the wavelengths from 450 to 824 nm. Representative spectral bands were selected and grouped into means. After harvest, grain yield was assessed and laboratory analyses of industrial traits were carried out. Spectral, industrial traits and yield data were subjected to statistical analysis. Data were analyzed by the following machine learning algorithms: J48 (J48) and REPTree (DT) decision trees, Random Forest (RF), Artificial Neural Networks (ANN), Support Vector Machine (SVM), and conventional Logistic Regression (LR) analysis. The clusters formed were used as the output of the models, while two groups of input data were used for the input of the models: the spectral variables (WL) noise-free obtained by the sensor (450–828 nm) and the spectral means of the selected bands (SB) (450.0–720.6 nm). Soybean genotypes were grouped according to their grain yield and industrial traits, in which the SVM and J48 algorithms performed better at classifying them. Using the spectral bands selected in the study improved the classification accuracy of the algorithms. [ABSTRACT FROM AUTHOR]