Search

Purpose: Microwave ablation (MWA) is a clinically established modality for treatment of lung tumors. A challenge with existing application of MWA, however, is local tumor progression, potentially due to failure to establish an adequate treatment margin. This study presents a robust simulation-based treatment planning methodology to assist operators in comparatively assessing thermal profiles and likelihood of achieving a specified minimum margin as a function of candidate applied energy parameters., Methods: We employed a biophysical simulation-based probabilistic treatment planning methodology to evaluate the likelihood of achieving a specified minimum margin for candidate treatment parameters (i.e., applied power and ablation duration for a given applicator position within a tumor). A set of simulations with varying tissue properties was evaluated for each considered combination of power and ablation duration, and for four different scenarios of contrast in tissue biophysical properties between tumor and normal lung. A treatment planning graph was then assembled, where distributions of achieved minimum ablation zone margins and collateral damage volumes can be assessed for candidate applied power and treatment duration combinations. For each chosen power and time combination, the operator can also visualize the histogram of ablation zone boundaries overlaid on the tumor and target volumes. We assembled treatment planning graphs for generic 1, 2, and 2.5 cm diameter spherically shaped tumors and also illustrated the impact of tissue heterogeneity on delivered treatment plans and resulting ablation histograms. Finally, we illustrated the treatment planning methodology on two example patient-specific cases of tumors with irregular shapes., Results: The assembled treatment planning graphs indicate that 30 W, 6 min ablations achieve a 5-mm minimum margin across all simulated cases for 1-cm diameter spherical tumors, and 70 W, 10 min ablations achieve a 3-mm minimum margin across 90% of simulations for a 2.5-cm diameter spherical tumor. Different scenarios of tissue heterogeneity between tumor and lung tissue revealed 2 min overall difference in ablation duration, in order to reliably achieve a 4-mm minimum margin or larger each time for 2-cm diameter spherical tumor., Conclusions: An approach for simulation-based treatment planning for microwave ablation of lung tumors is illustrated to account for the impact of specific geometry of the treatment site, tissue property uncertainty, and heterogeneity between the tumor and normal lung., (© 2021 American Association of Physicists in Medicine.)

Recent changes to the guidelines for screening and early diagnosis of lung cancer have increased the interest in preserving post-radiotherapy lung function. Current investigational approaches are based on spatially mapping functional regions and generating regional avoidance plans that preferentially spare highly ventilated/perfused lung. A potentially critical, yet overlooked, aspect of functional avoidance is radiation injury to peripheral airways, which serve as gas conduits to and from functional lung regions. Dose redistribution based solely on regional function may cause irreparable damage to the 'supply chain'. To address this deficiency, we propose the functionally weighted airway sparing (FWAS) method. FWAS (i) maps the bronchial pathways to each functional sub-lobar lung volume; (ii) assigns a weighting factor to each airway based on the relative contribution of the sub-volume to overall lung function; and (iii) creates a treatment plan that aims to preserve these functional pathways. To evaluate it, we used four cases from a retrospective cohort of SAbR patients treated for lung cancer. Each patient's airways were auto-segmented from a diagnostic-quality breath-hold CT using a research virtual bronchoscopy software. A ventilation map was generated from the planning 4DCT to map regional lung function. For each terminal airway, as resolved by the segmentation software, the total ventilation within the sub-lobar volume supported by that airway was estimated and used as a function-based weighting factor. Upstream airways were weighted based on the cumulative volumetric ventilation supported by corresponding downstream airways. Using a previously developed model for airway radiosensitivity, dose constraints were determined for each airway corresponding to a <5% probability of airway collapse. Airway dose constraints, ventilation scores, and clinical dose constraints were input to a swarm optimization-based inverse planning engine to create a 3D conformal SAbR plan (CRT). The FWAS plans were compared to the patients' prescribed CRT clinical plans and the inverse-optimized clinical plans. Depending on the size and location of the tumour, the FWAS plan showed superior preservation of ventilation due to airflow preservation through open pathways (i.e. cumulative ventilation score from the sub-lobar volumes of open pathways). Improvements ranged between 3% and 23%, when comparing to the prescribed clinical plans, and between 3% and 35%, when comparing to the inverse-optimized clinical plans. The three plans satisfied clinical requirements for PTV coverage and OAR dose constraints. These initial results suggest that by sparing pathways to high-functioning lung subregions it is possible to reduce post-SAbR loss of respiratory function.

Respiratory motion management techniques in radiotherapy (RT) planning are primarily focused on maintaining tumor target coverage. An inadequately addressed need is accounting for motion in dosimetric estimations in smaller serial structures. Accurate dose estimations in such structures are more sensitive to motion because respiration can cause them to move completely in or out of a high dose-gradient field. In this work, we study three motion management strategies (m1-m3) to find an accurate method to estimate the dosimetry in airways. To validate these methods, we generated a 'ground truth' digital breathing model based on a 4DCT scan from a lung stereotactic ablative radiotherapy (SAbR) patient. We simulated 225 breathing cycles with  ±10% perturbations in amplitude, respiratory period, and time per respiratory phase. A high-resolution breath-hold CT (BHCT) was also acquired and used with a research virtual bronchoscopy software to autosegment 239 airways. Contours for planning target volume (PTV) and organs at risk (OARs) were defined on the maximum intensity projection of the 4DCT (CT MIP ) and transferred to the average of the 10 4DCT phases (CT AVG ). To design the motion management methods, the RT plan was recreated using different images and structure definitions. Methods m1 and m2 recreated the plan using the CT AVG image. In method m1, airways were deformed to the CT AVG . In m2, airways were deformed to each of the 4DCT phases, and union structures were transferred onto the CT AVG . In m3, the RT plan was recreated on each of the 10 phases, and the dose distribution from each phase was deformed to the BHCT and summed. Dose errors (mean [min, max]) in airways were: m1: 21% (0.001%, 93%); m2: 45% (0.1%, 179%); and m3: 4% (0.006%, 14%). Our work suggests that accurate dose estimation in moving small serial structures requires customized motion management techniques (like m3 in this work) rather than current clinical and investigational approaches.

Objectives: With the objective of simultaneous bronchoscopic biopsy and ablation of malignant solitary pulmonary nodules, we have developed a flexible monopolar radiofrequency (RF) catheter that can be deployed through the working channel of most bronchoscopes., Materials and Methods: Fresh tumor specimens were heated in a water bath to 37 °C, and the RF catheter was inserted into the tumors within the specimen. Temperature sensors were positioned 3 mm, 5 mm and 7 mm from the electrode to measure the temperature of the surrounding tissue every 1 s. The ablation was conducted by applying RF energy for 8 min. The ablated specimens were evaluated by cutting the tissue samples along the top of the device and measuring the ablation zones., Results: Five ablations were performed in 3 specimens. All of the ablation zones had a major axis length (along the electrode axis) between 18.9 mm and 22.8 mm and a minor axis length (perpendicular to the major axis) between 13.3 mm and 18.0 mm. The temperature data showed that all of the temperature sensors detected 60 °C or higher. These results demonstrate that the RF catheter was capable of generating ablation zones that were locally contained in ex vivo human cancerous lung specimens and that incorporated the tumor tissues., Conclusion: We present the results of a benchtop study demonstrating the local control of ablation achieved using the RF device. This study suggests that the ex vivo ablation of lung malignancy with a new bronchoscopic RF catheter is feasible and that in vivo tumor ablation with this method in humans merits further study., (Copyright © 2018 Elsevier B.V. All rights reserved.)