Search

Linear low density polyethylene (LLDPE) exhibits a complex molecular structure that is characterized by molar mass and chemical composition distributions. Both molecular parameters complementarily influence the final application properties. Typically, the molecular structure of commercial polyolefins is characterized by a set of technical parameters including the melt flow index, the crystallization and melting temperatures and the comonomer content as obtained using Fourier transform infrared or NMR spectroscopy. LLDPEs with high comonomer contents are typically regarded as plastomers or elastomers. Due to their low crystallinities, characterization of these materials using crystallization‐based analytical techniques is of limited use since the majority of the material is rather amorphous. Such materials need specific alternative analytical methods that may be based on molar mass and/or chemical composition fractionation. Here it is shown that for a comprehensive analysis of LLDPEs with similar bulk properties, preparative molar mass fractionation (pMMF) and advanced analysis of the fractions are required. The pMMF fractions are comprehensively analyzed using size exclusion chromatography, differential scanning calorimetry and high‐temperature high‐performance liquid chromatography to provide detailed information on molar mass and copolymer composition. Correlated information of these molecular parameters is obtained by comprehensive two‐dimensional liquid chromatography. © 2019 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

ABSTRACT Classical linear low density polyethylenes (LLDPEs) are copolymers of ethylene and 1-octene or 1-hexene, respectively. In the past, other 1-olefins have been tested as comonomers but the resulting LLDPEs were never commercialized as large scale products. The present study focuses on the use of 1-heptene as an interesting comonomer for the synthesis of LLDPE. For a comparison of the molecular structure and the physical properties of 1-heptene- and 1-octene-based LLDPEs, five Ziegler-Natta LLDPEs of varying comonomer contents based on 1-heptene and 1-octene, respectively, were acquired and analysed using advanced methods. The comonomer contents of the resins were between 0.35 and 6.4 mol %. Crystallization-based techniques revealed similar bimodal distributions that are due to the formation of copolymer and polyethylene homopolymer fractions. The compositional distribution of the copolymers was studied by high-temperature (HT) HPLC and HT-2D-LC. The analytical results indicate similar chemical heterogeneities and molar mass distributions of the two sets of LLDPE up to a comonomer content of 3 mol %. Similar to the molecular structure, the physical properties of the materials are quite similar. At comonomer contents of ≥3 mol % differences between the two sets of samples are seen that are attributed to differences in the abilities of 1-heptene and 1-octene in disrupting the crystal arrangements of the polymer chains in solid state. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 962-975 [ABSTRACT FROM AUTHOR]

Preparative temperature rising elution fractionation (prepTREF) is the standard technique for the preparative fractionation of polyolefins according to crystallisability. For olefin copolymers such as linear low-density polyethylene (LLDPE), it was believed that the TREF elution temperature correlates directly with the copolymer composition. For copolymers having different bulk comonomer contents, the prepTREF fractions of different samples collected at a given temperature were assumed to have the same chemical composition. It was acknowledged quite early that co-crystallisation effects may disturb TREF fractionation and fractions are obtained that are not completely homogeneous. This, however, has not been investigated quantitatively so far. The fundamental statement of prepTREF is challenged for the first time quantitatively using advanced analytical techniques including high-temperature high-performance liquid chromatography (HPLC). Ethylene-1-octene copolymers having bulk comonomer contents ranging from 0.3 to 6.4 mol% were fractionated by prepTREF, and the fractions were analysed by high-temperature size exclusion chromatography, crystallisation analysis fractionation, differential scanning calorimetry and high-temperature HPLC. All analytical results prove that the TREF fractions collected from different samples at the same elution temperature have different chemical compositions. The chemical compositions of the fractions correlate with the compositions of the bulk samples in that the comonomer contents of similar TREF fractions increase with an increase of the comonomer content of the bulk samples. These results are in clear contrast to the previous assumption that the TREF fraction composition is independent of the bulk copolymer composition for a given copolymer type. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]