Search

High-voltage cathode materials have gained much attention as one of the promising electrode materials to increase power density of lithium ion batteries by raising the working voltage. However, the use of such high-voltage cathode materials is still challenging, because their working voltage is close to the electrochemical oxidation potential of organic electrolyte used in lithium ion batteries. In this work, we demonstrated that simultaneous fluorination of LiNi 0.5 Mn 1.5 O 4 (LNMO) particles as well as conductive agent in the electrode could significantly improve the electrochemical stability of LNMO cathode. The resulting electrode showed better cycle performance both at room temperature and elevated temperature compared to both bare LNMO electrode and the electrode with only LNMO fluorinated. These results showed that direct fluorination of high voltage cathode can reduce the side reaction of high voltage cathode electrode with the electrolyte, thereby stabilizing the surface of carbon black as well as that of high voltage cathode material.

The Li[Ni0.7Co0.1Mn0.2]O2 cathode material synthesized using a co-precipitation method was investigated as a function of various pH level in terms of its microstructure and electrochemical properties. From the XRD pattern analysis, the Li[Ni0.7Co0.1Mn0.2]O2 cathode material prepared in this study are found to well coincide with typically hexagonal alpha-NaFeO2 structure. The primary particle size was about 100-300 nm at all compositions while secondary particle size increased as pH level increased from 10.34 microm (pH 10.3) to 14 microm (pH 12.5). The initial discharge capacity increased up to 165 mAh/g (0.1 C) at pH 11, and then decreased down to 144 mAh/g with further increasing pH level. The capacity retention of the cathode (pH 11) showed 90% at 0.2 C and 15% at 5 C respectively compared with the discharge capacity at 0.1 C. The capacity retention of the cathode (pH 10.3) performed 94% of the initial capacity after 22 cycles at 0.5 C charge/discharge test. Therefore, it is thought to be that pH 10.3 is optimized condition of the Li[Ni0.7Co0.1Mn0.2]O2 cathode material in this study because pH 10.3 shows better cycle performance than other conditions.

In this work, we report novel composite gel polymer electrolyte for lithium-ion polymer batteries. As the lithium ion sources of single ion conductor, the core–shell structured SiO2(Li+) particles with uniform spherical shape are synthesized and used as functional fillers in composite gel polymer electrolytes. We show that our material, based on the incorporation of core–shell structured SiO2(Li+) particles into a gel polymer matrix, acts as a very effective polymer electrolyte for lithium-ion polymer batteries. Keywords: Core–shell particle, Functional filler, Lithium batteries, Composite polymer electrolyte, Silica

Problems related to tremendous volume changes associated with cycling and the low electron conductivity and ion diffusivity of Si represent major obstacles to its use in high-capacity anodes for lithium ion batteries. We have developed a group IVA based nanotube heterostructure array, consisting of a high-capacity Si inner layer and a highly conductive Ge outer layer, to yield both favorable mechanics and kinetics in battery applications. This type of Si/Ge double-layered nanotube array electrode exhibits improved electrochemical performances over the analogous homogeneous Si system, including stable capacity retention (85% after 50 cycles) and doubled capacity at a 3C rate. These results stem from reduced maximum hoop strain in the nanotubes, supported by theoretical mechanics modeling, and lowered activation energy barrier for Li diffusion. This electrode technology creates opportunities in the development of group IVA nanotube heterostructures for next generation lithium ion batteries.

Silicon is a promising candidate for electrodes in lithium ion batteries due to its large theoretical energy density. Poor capacity retention, caused by pulverization of Si during cycling, frustrates its practical application. We have developed a nanostructured form of silicon, consisting of arrays of sealed, tubular geometries that is capable of accommodating large volume changes associated with lithiation in battery applications. Such electrodes exhibit high initial Coulombic efficiencies (i.e., >85%) and stable capacity-retention (>80% after 50 cycles), due to an unusual, underlying mechanics that is dominated by free surfaces. This physics is manifested by a strongly anisotropic expansion in which 400% volumetric increases are accomplished with only relatively small (

Developing electrode materials with high-energy densities is important for the development of lithium-ion batteries. Here, we demonstrate a mesoporous molybdenum dioxide material with abnormal lithium-storage sites, which exhibits a discharge capacity of 1,814 mAh g−1 for the first cycle, more than twice its theoretical value, and maintains its initial capacity after 50 cycles. Contrary to previous reports, we find that a mechanism for the high and reversible lithium-storage capacity of the mesoporous molybdenum dioxide electrode is not based on a conversion reaction. Insight into the electrochemical results, obtained by in situ X-ray absorption, scanning transmission electron microscopy analysis combined with electron energy loss spectroscopy and computational modelling indicates that the nanoscale pore engineering of this transition metal oxide enables an unexpected electrochemical mass storage reaction mechanism, and may provide a strategy for the design of cation storage materials for battery systems., Electrode materials with high energy density are important for the development of Li-ion batteries. Here, the authors report a molybdenum dioxide anode with abnormal lithium storage sites, exhibiting a discharge capacity twice its theoretical value by utilizing two different storage mechanisms.

Germanium holds great potential as an anode material for lithium ion batteries due to its large theoretical energy density and excellent intrinsic properties related to its kinetics associated with lithium and electrons. However, the problem related to the tremendous volume change of Ge during cycling is the dominant obstacle for its practical use. The previous research has focused on the improvement in mechanics associated with lithium without consideration of the kinetics. In this study, we demonstrate that the configuration engineering of the Ge electrode enables the improvement in kinetics as well as favorable mechanics. Two types of Ge inverse opal structures with porous walls and dense walls were prepared using a confined convective assembly method and by adjusting Ge deposition parameters in a chemical vapor deposition system. The Ge inverse opal electrode with porous walls shows much improved electrochemical performances, especially cycle performance and rate capability, than the electrode with dense walls. These improvements are attributed to a large free surface, which offers a facile strain relaxation pathway and a large lithium flux from the electrolyte to the active material.

Si nanowires (SiNWs)–carbon nanofibers (CNFs) branched structures with variation in carbon densities were synthesized. SiNWs with critical density of CNFs show the best electrochemical performance, which is attributed to increase in free volume around the SiNWs as well as a buffering role of the branched CNFs against large volumetric change during cycling.