Search

In the present study we aimed to control insulin release from the reverse hexagonal (H II ) mesophase using Thermomyces lanuginosa lipase (TLL) in the environment (outer TLL) or within the H II cylinders (inner TLL). Two insulin-loaded systems differing by the presence (or absence) of phosphatidylcholine (PC) were examined. In general, incorporation of PC into the H II interface (without TLL) increased insulin release, as a more cooperative system was formed. Addition of TLL to the systems' environments resulted in lipolysis of the H II structure. In the absence of PC, the lipolysis was more dominant and led to a significant increase in insulin release (50% after 8h). However, the presence of PC stabilized the interface, hindering the lipolysis, and therefore no impact on the release profile was detected during the first 8h. Entrapment of TLL within the H II cylinders (with and without PC) drastically increased insulin release in both systems up to 100%. In the presence of PC insulin released faster and the structure was more stable. Consequently, the presence of lipases (inner or outer) both enhanced the destruction of the carrier, and provided sustained release of the entrapped insulin., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Insulin loading into the H II mesophases was examined as a function of its concentration, with addition of glycerol as a cosolvent and with addition of phosphatidylcholine (PC) as a structural stabilizer. The structural properties, the molecular interactions, the viscoelastic properties, and the dynamic behavior were investigated by SAXS, ATR-FTIR, and rheological measurements. Insulin release was then monitored and analyzed. Insulin incorporation into the H II systems shrank the cylinders as it competed with the lipids in water-bonding. Insulin interrupted the interface while increasing τ max and creating a more solid-like response. Upon addition of PC, cooperative flow behavior was detected, which is probably the reason for increase in insulin cumulative release from 28% to 52% after 300 min. In the presence of glycerol, the system was less cooperative but insulin was more compactly folded, resulting in a slight improvement in insulin release (up to 6%). Addition of both PC and glycerol caused the maximum release (55%). The addition of additives into the H II system demonstrates how structural modifications can improve insulin release, and influence future design of encapsulated drug delivery systems., (Copyright © 2016 Elsevier Inc. All rights reserved.)

Sodium diclofenac (Na-DFC) and celecoxib (CLXB) are common nonsteroidal anti-inflammatory (NSAID) drugs which suffer from poor bioavailability and severe side effects when consumed orally, and their transdermal delivery might present important advantages. In this study, the drugs were solubilized in cubic and lamellar mesophases as transdermal delivery vehicles, and a cell-penetrating peptide, HIV-TAT (TAT), was examined as a skin penetration enhancer. SD-NMR, ATR-FTIR, and EPR measurements revealed that, in the cubic mesophase (which is rich in water content), TAT populates the aqueous cores and binds water, while in the dense lamellar system (with the lower water content) TAT is bound also to the glycerol monooleate (GMO) and increases the microviscosity and the order degree. TAT secondary structure in the cubic system was found to be a random coil while once it was embedded in the closely packed lamellar system it transforms to a more ordered compact state of β-turns arranged around the GMO headgroups. TAT remarkably increased the diffusion of Na-DFC and CLXB from the cubic systems by 6- and 9-fold enhancement, respectively. TAT effect on drug diffusion from the lamellar systems was limited to an increase of 1.3- and 1.7-fold, respectively. The dense packing and strong binding in the lamellar phase led to slow diffusion rates and slower drug release in controlled pattern. These effects of the chemical composition and vehicle geometry on drug diffusion are demonstrated with the impacts of TAT which can be specifically utilized for controlling skin delivery of drugs as required.

The effect of second, third, and fifth generations of poly(propylene imine) glycodendrimers-open maltose shell (PPI-Mal) on reverse hexagonal (HII) mesophase and on the release of sodium diclofenac (Na-DFC) drug was investigated. The HII mesophase comprised glycerol monooleate (GMO)/tricaprylin (TAG) in a weight ratio of 90/10 and 20 wt % water (+0.5 wt % PPI-Mal of each generation) without or with 0.25 wt % (Na-DFC). The microstructural characteristics of these systems were determined by small-angle X-ray scattering; attenuated total reflectance Fourier transform infrared was used to characterize the molecular level interactions and the location of the PPI-Mal. Third-and fifth-generation PPI-Mal, because of their maltose groups, interact mainly with the bulk water within the cylinders of the HII and strongly bind the water molecules, as manifested by the decrease in the lattice parameter and dehydration of the lipid headgroups. Co-solubilization of Na-DFC with the third and fifth generations caused competition of the two host compounds for water binding and induced relocation of the drug from the bulk water to the GMO-water interface. In vitro release of Na-DFC from the HII showed that the release process was faster in the systems with third- and fifth-generation PPI-Mal compared with the control and second-generation systems.

The structural, dynamic, and kinetic aspects of the HII systems based on glycerol monooleate (GMO), phosphatidylcholine (PC), triacylglycerol (TAG), and water were investigated by dielectric spectroscopy in a frequency range of 10(-2)-10(6) Hz, and a temperature range of 290-320 K. Three distinct processes as well as a temperature-activated dc conductivity were detected and examined. These were assigned to the reorientation of the GMO polar heads, the tangential movement of counterions at the interface, the transport of TAGs through the lipids tails, and the ion mobility within the water cylinders. Upon addition of PC, the critical temperature (T0) of the dehydration of the GMO headgroups increased. The optimal concentration found for structural stabilization of the HII mesophase was 10 wt% PC, since it imparted the strongest bonding at the interfacial layer and increased the association between the lipid tails. Within the HII cluster, TAG percolated and shifted between the hexagonal rods themselves. The present study demonstrated the benefit of controlling the critical temperature of the HII mesophase partial dehydration and softening, as well as the percolation of TAGs. These factors influence the diffusion mode of embedded drugs in the physiological temperature range., (Copyright © 2013. Published by Elsevier Inc.)

In this review we present recent progress on lyotropic liquid crystals (LLC) as delivery vehicles for cosmetoceuticals, nutraceuticals, and drugs. LLC have been known for decades and their potential as delivery vehicles is well recognized. Yet, the two major mesophases, reverse hexagonal (H(II)) and bicontinuous cubic (primitive, gyroid, and diamond), are relatively hard gels with very slow release kinetics of the bioactives. In recent years a discontinuous cubic micellar mesophase (Q(L)) was characterized and studied, showing significant potential as a delivery vehicle. In addition, the H(II) mesophase formed could be much more fluid and produced at room temperature. Recent studies concentrated on establishing methods to evaluate solubilization capacity and relationship between the diameter and length of the cylinders and the nature of the solubilizates. Special attention was given to finding methods to target the vehicles to the lumen and to trigger the release of the bioactives. This review summarizes the efforts of our group along with work by numerous other scientists in this area. All these efforts suggest that the lyotropic mesophases and the corresponding dispersed soft particles (cubosomes, hexosomes, micellosomes) are now more than ever ready to become drug delivery vehicles for transport across the skin and the gut.

Penetratin, a cell penetrating peptide is embedded within a reversed hexagonal (H(II)) mesophase for improved transdermal delivery of sodium diclofenac (Na-DFC). The H(II) mesophase serves as the solubilization reservoir and gel matrix whereas penetratin is the transdermal penetration enhancer for the drug. The systems were characterized and the interactions between the components were determined by SAXS, ATR-FTIR and SD-NMR. High affinity of Na-DFC to glycerol monooleate (GMO) was revealed, associated with increasing the order within the water channels. This affinity is enhanced upon heating and seems to be associated with GMO dehydration. Penetratin (PEN) is entrapped at the hydrophilic region of the H(II) mesophase, between the GMO headgroups, reducing the order of the system and decreasing the size of the hexagonal domains. The transdermal delivery rate of Na-DFC through porcine skin, from the H(II) mesophases, was enhanced by PEN and so also the cumulative transport crossing the skin. PEN induced accelerated drug diffusion through the stratum corneum, towards the different skin layers. The transdermal delivery enhancement is explained from the results of the ATR-FTIR analysis. It seems that PEN accelerates the structural transition of skin lipids from hexagonal to liquid. The disordering results in enhanced diffusion of Na-DFC through the stratum corneum, followed by enhanced overall penetration of the drug., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Micro- and macrostructural behaviors of three different lyotropic liquid crystals (LLCs) loaded with a dendrimer, namely second generation poly(propylene imine) (PPI-G2), were studied by means of rheology and electron paramagnetic resonance (EPR). The three mesophases were L(α), Q(224), and H(II) composed of glycerol monooleate (GMO) and water-PPI-G2 solution (and d-α-tocopherol (vitamin E) in the case of H(II)). We characterized the impact of PPI-G2 interactions with the components of the host mesophases on their structural characteristics on different length scales. The incorporation of PPI-G2 within the L(α) and H(II) systems induced the formation of more elastic hexagonal systems with a "solidlike" behavior, while in the Q(224) system a different trend with a "liquidlike" behavior was observed. As a result, the dendrimer induced a remarkable change in both the structural and viscoelastic properties of the systems. Hence, the microenvironment in the interface region within the systems was monitored by computer-aided EPR using 5-doxylstearic acid (5-DSA) as a pH-dependent probe. The microviscosity (τ) and order (S) of systems were found to be sensitive to the PPI-G2 presence: when PPI-G2 concentration increased, τ and S increased in both the L(α) and Q(224) systems. In the H(II) systems two trends were observed, reflecting a decrease in τ and S up to 10 wt % PPI-G2 and subsequently their increase at higher dendrimer concentrations. It was assessed that PPI-G2 interacted strongly with the GMO hydroxyl groups in the L(α) phase, with the water molecules in the Q(224) systems. In the H(II) mesophase strong interactions with both the water and GMO hydroxyl molecules were detected.

The incorporation of dendrimer into three lyotropic liquid crystalline (LLCs) mesophases is demonstrated for the first time. A second generation (G2) of poly(propylene imine) dendrimer (PPI) was solubilized into lamellar, diamond reverse cubic, and reverse hexagonal LLCs composed of glycerol monooleate (GMO), and water (and D-α-tocopherol in the H(II) system). The combination of PPI with LLCs may provide an advantageous drug delivery system. Cross-polarized light microscope, small-angle X-ray scattering (SAXS), and attenuated total reflectance Fourier transform infrared (ATR-FTIR) were utilized to study the structural behavior of the mesophases, the localization of PPI within the system, and the interactions between the guest molecule and the system's components. It was revealed that PPI-G2 functioned as a "water pump", competing with the lipid headgroups for water binding. As a result, L(α)→H(II) and Q(224)→H(II) structural shifts were detected (at 10 wt % PPI-G2 content), probably caused by the dehydration of monoolein headgroups and subsequent increase of the lipid's critical packing parameter (CPP). In the case of H(II), as a result of the balance between the dehydration of the monoolein headgroups and the significant presence of PPI within the interfacial region, increasing the quantity of hydrogen bonds, no structural transitions occurred. ATR-FTIR analysis demonstrated a downward shift of the H-O-H (water), as a result of PPI-G2 embedment, suggesting an increase in the mean water-water H-bond angle resulting from binding PPI-G2 to the water network. Additionally, the GMO hydroxyl groups at β- and γ-C-OH positions revealed a partial interaction of hydrogen bonds with N-H functional groups of the protonated PPI-G2. Other GMO interfacial functional groups were shown to interact with the PPI-G2, in parallel with the GMO dehydration phenomenon. In the future, these outcomes can be used to design advanced drug delivery systems, allowing administration of dendrimers as a therapeutic agent from LLCs.

Recently, self-assembled lyotropic liquid crystals (LLCs) of lipids and water have attracted the attention of both scientific and applied research communities, due to their remarkable structural complexity and practical potential in diverse applications. The phase behavior of mixtures of glycerol monooleate (monoolein, GMO) was particularly well studied due to the potential utilization of these systems in drug delivery systems, food products, and encapsulation and crystallization of proteins. Among the studied lyotropic mesophases, reverse hexagonal LLC (H(II)) of monoolein/water were not widely subjected to practical applications since these were stable only at elevated temperatures. Lately, we obtained stable H(II) mesophases at room temperature by incorporating triacylglycerol (TAG) molecules into the GMO/water mixtures and explored the physical properties of these structures. The present feature article summarizes recent systematic efforts in our laboratory to utilize the H(II) mesophases for solubilization, and potential release and crystallization of biomacromolecules. Such a concept was demonstrated in the case of two therapeutic peptides-cyclosporin A (CSA) and desmopressin, as well as RALA peptide, which is a model skin penetration enhancer, and eventually a larger macromolecule-lysozyme (LSZ). In the course of the study we tried to elucidate relationships between the different levels of organization of LLCs (from the microstructural level, through mesoscale, to macroscopic level) and find feasible correlations between them. Since the structural properties of the mesophase systems are a key factor in drug release applications, we investigated the effects of these guest molecules on their conformations and the way these molecules partition within the domains of the mesophases. The examined H(II) mesophases exhibited great potential as transdermal delivery vehicles for bioactive peptides, enabling tuning the release properties according to their chemical composition and physical properties. Furthermore, we showed a promising opportunity for crystallization of CSA and LSZ in single crystal form as model biomacromolecules for crystallographic structure determination. The main outcomes of our research demonstrated that control of the physical properties of hexagonal LLC on different length scales is key for rational design of these systems as delivery vehicles and crystallization medium for biomacromolecules., (Copyright © 2011 Elsevier Inc. All rights reserved.)

We present a dielectric study of H(II) mesophases (H(II)) based on a GMO/tricaprylin/phosphatidylcholine/water system seeded with the peptide Cyclosporine A (CSA). The study covers a frequency range 0.01 Hz to 1 MHz and a temperature range of 293 to 319 K, with a 3 K temperature step. Three dielectric relaxation processes are observed and discussed. This picture is further elucidated by comparison with a dielectric study of the empty H(II) mesophase system, previously published, where the same three processes were involved. A complex picture emerges whereby the CSA is intercalated between the surfactant tails yet protrudes into the interface as well. Whereas the CSA remains hydrophobic, it still influences the relaxation behavior of the GMO head and counterion movement along the interface in a nontrivial manner. The third dipolar species, the tricaprylin molecule, is also influenced by the presence of CSA. A critical temperature T(0) = 307 K is recognized and identified as the dehydration temperature of the surfactant heads. This induces a conformal transition in the CSA, drastically changing its effect on the three dielectric processes evident in the raw data. The implications of this behavior are discussed in detail.

In this paper we examined feasible correlations between the structure of different lyotropic mesophases and transdermal administration of three diclofenac derivatives with varying degrees of kosmotropic or chaotropic properties, solubilized within the mesophases. It was found that the most chaotropic derivative of diclofenac diethyl amine (DEA-DFC) interacted with the polar heads of glycerol monooleate (GMO), thus expanding the water-lipid interface of the lamellar and cubic mesophases. This effect was detected by an increase in the lattice parameter of both mesophases, enhanced elastic properties, and increased solid-like response of the systems in the presence of DEA. Potassium diclofenac (K-DFC), a less chaotropic salt, had less pronounced effect on the structural features of the mesophases. Kosmotropic Na+ salt (Na-DFC) had only minor influence on both lamellar and cubic structures. The locus of solubilization of the molecules with the host mesophases was correlated with their delivery. It was suggested that transdermal delivery of kosmotropic Na-DFC was accelerated by the aqueous phase and less constrained by the interaction with monoglyceride. On the other hand, the chaotropic cations (K+ and DEA+), presumably entrapped in the water-lipid interface, interacted with monoglyceride headgroups, which is likely to be the key cause for their sustained administration., (2010 Elsevier B.V. All rights reserved.)

This study develops a novel transdermal delivery vehicle for the enhanced delivery of sodium diclofenac (Na-DFC). The system utilizes the advantages of reversed hexagonal lyotropic liquid crystals (H(II)LC), combined with a peptide cell penetration enhancer (CPE), creating together an adaptable system that provides versatile options in the field of transdermal delivery. This enhancer peptide is based on a family of amphipatic peptides that exhibit improved membrane permeability. Franz permeation cell experiments revealed that the peptide enhancer (RALA) improved Na-DFC skin penetration of the liquid crystal 2.2-fold. We studied the structural effects of RALA solubilization on the H(II) mesophase. RALA acts as a chaotropic agent, interfering in the structure of the water, and causes a measurable swelling of the aqueous cylinders by 5A. Small angle X-ray scattering (SAXS) and attenuated total reflectance-Fourier transform infrared (ATR-FTIR) measurements reveal enhanced hydration of the glycerol monooleate (GMO) headgroups and a 6.5% increase in the fraction of non-freezable water resulting from RALA incorporation. RALA caused a gradual increase in the GMO effective headgroup area due to the hydration, leading eventually to a transform of the hexagonal structure towards a lamellar one. Circular dichroism and ATR-FTIR measurements showed a conservation of the peptide structure when incorporated into the H(II) mesophase. The combined H(II)LC-CPE systems can serve as high potential vehicles for a variety of drugs, as they can easily be modified by varying the composition and temperature, according to the required dose and delivery features., (Copyright 2010 Elsevier B.V. All rights reserved.)

The synergistic solubilization of two major hydrophilic (vitamin C, ascorbic acid, AA) and lipophilic (vitamin E, D-alpha-tocopherol, VE) antioxidants within reverse hexagonal (H(II)) mesophases is reported. The H(II) mesophases are composed of monoolein (GMO)/VE/AA/water. A wide range of VE concentration was examined (on the expense of GMO concentrations) while the AA and water concentrations remained constant (4 and 12.5 wt %, respectively) in order to expand the H(II) mesophase. SAXS and DSC combined with ATR-FTIR techniques were utilized to study the interactions between each solubilizate and the H(II) component that enabled the synergistic accommodation of the hydrophilic and hydrophobic molecules. It was revealed that up to 27 wt % VE solubilized within the H(II) mesophase. This hydrophobic additive localized at the lipophilic GMO tail region solvating the surfactant tails, thereby enabling the formation of the H(II) structure. As a result, the lattice parameter and the melting point of the hydrophobic tails decreased. Above 27 wt % VE (up to 33 wt %), once the GMO lipophilic region was homogenously solvated, additional VE molecules located closer to the interface. At this range of concentrations, new hydrogen bonds between O-H groups of VE and O-H groups of GMO were formed. Once 35 wt % VE was introduced, the H(II) structure transformed to face-centered reverse micellar cubic phase (Fd3m, Q(227)).

The present work investigates the detailed molecular structure of the H(II) mesophase of GMO/tricaprylin/phosphatidylcholine/water system in the presence of hydrophobic model peptide Cyclosporin A (CSA) via ATR-FTIR analysis. The conformation of the peptide in the hexagonal mesophase, as well as its location and specific interactions with the components of the carrier, were studied. Incorporation of phosphatidylcholine to the ternary GMO/tricaprylin/water system caused competition for water binding between the hydroxyl groups of GMO and the phosphate groups of the phosphatidylcholine (PC) leading to dehydration of the GMO hydroxyls in favor of phospholipid hydration. Analysis of CSA solubilization effect on the H(II) mesophase revealed a significant increase in the strength of hydrogen bonding with surfactant hydrogen-bonded carbonyls, indicating interaction of the peptide with the CO groups of the surfactants. The peptide probably caused partial replacement of the intramolecular hydrogen bonds of the mesophase carbonyl groups with intermolecular hydrogen bonds of these carbonyl groups with the peptide. Furthermore, analysis of the Amide I' peak in the FTIR spectra of the peptide demonstrated that two pairs of its internal hydrogen bonds are disrupted when it is incorporated. The partial disruption of the internal hydrogen bonds seems to cause an outward rotation of the peptide amide groups involved, resulting in more efficient intermolecular hydrogen-bonding ability. Apparently, this conformational change increased the hydrophilic properties of CSA, even making it susceptible to a weak interaction with the GMO hydroxyl groups in the interfacial region.

Abstract: Lyotropic liquid crystals of glycerol monooleate (GMO) and water binary mixtures have been extensively studied and their resemblance to human membranes has intrigued many scientists. Biological systems as well as food mixtures are composed of lipids and fat components including triacylglycerols (TAGs, triglycerides) that can affect the nature of the assembly of the mesophase. The present study examines the effect of TAGs of different chain lengths (C2–C18) at various water/GMO compositions, on phase transitions from lamellar or cubic to reverse hexagonal (Lα–HII and Q–HII). The ability of the triglycerides to promote the formation of an HII mesophase is chain length-dependent. It was found that TAG molecules with very short acyl chains (triacetin) can hydrate the head groups of the lipid and do not affect the critical packing parameter (CPP) of the amphiphile; therefore, they do not affect the self-assembly of the GMO in water, and the mesophase remains lamellar or cubic. However, TAGs with medium chain fatty acids will solvate the tails of the lipid, and will affect the CPP of the GMO, and transform the lamellar or cubic phases into hexagonal mesophase. TAGs with long chain fatty acids are very bulky, not very miscible with the GMO, and therefore, kinetically are very slow to solvate the lipid tails of the amphiphile and are difficult to accommodate into the lipophilic parts of the GMO. Their effect on the transitions from a lamellar or cubic phase to hexagonal is detected only after months of equilibration. In order to enhance the effect of the TAG on the phase transitions in the GMO/triglyceride/water systems, temperature and electrolytes effects were examined. In the presence of short and medium chain triglycerides, increasing temperature caused a transition from lamellar or hexagonal to L2 phase (highest CPP value). However, in the presence of long chain TAGs, increasing temperature to ca. 40°C caused a formation of HII mesophase. In addition, it was found that in tricaprylin/GMO/water systems, the increase in temperature caused a decrease in the lattice parameter. The effect of NaCl on the HII mesophase revealed interesting results. At low concentration of tricaprylin (5wt%), the addition of only 0.1wt% of NaCl was sufficient to cause the formation of well-defined HII mesophase, while further addition of electrolyte increased the hexagonal lattice parameters. At higher TAGs concentrations (10wt%), addition of electrolyte resulted in the formation of HII with modifications of the lattice parameter. All the examined effects were more pronounced with increasing water content. [Copyright &y& Elsevier]

Major recent advances. Structured self-assembled liquids have been considered as efficient microreactors for organic and enzymatic reactions. Only recently scientists learned to use food-grade cosolvents and coemulsifiers together with hydrophilic non-ionic surfactants and to construct U-type phase diagrams with large isotropic regions ranging continuously from the oil-rich corner to the water-rich corner without any phase separation. The U-type microemulsions facilitate triggering and control of certain reactions by changing water activities. Maillard thermal degradation between sugars and amino acids is the main, and almost the only, chemical reaction that has been studied in food-grade microemulsions. Some examples of recent studies include: Maillard processes in binary structured fluids composed of monoglycerides of fatty acids and water forming microemulsions and lyotropic liquid crystalline structures; pseudoternary and pseudoquaternary W/O microemulsions; U-type microemulsions (W/O, O/W and bicontinuous microemulsions); enzymatic reactions aimed to prepare other surfactants such as sugar esters, monoglycerides and lysolecithins or triglycerides. Reactions in microreactors lead to unique new products. The reaction products and rates are controlled by the hydrophilicity/lipophilicity of the reagents (guest molecules), their molar ratios, type of oil phase, nature of surfactants and oil/surfactant ratios, nature of curvature and its elasticity (adjusted by cosolvent and coemulsifier) and by the water activity. The field is in its infancy and will need work of many more model reactions before it will be used in industrial food applications. Enzymatic reactions in non-food microemulsions are common practice but only few examples of food microemulsions as enzymatic microreactors have been extensively studied. [Copyright &y& Elsevier]

Abstract: In an attempt to form HII mesophases at room temperature we prepared lyotropic liquid crystals with two surfactants of the same lipophilic tails (glycerol monooleate, GMO, and oleyl lactate, OL) but differing in the size and charge of the headgroups. Increasing OL concentration significantly affected the hydration of the headgroups and subsequently the lipids packing. At low OL content the cubic mesophase was formed, while at higher OL contents the formation of hexagonal mesophase was favored. It was assumed that OL competed on the water binding, tuning the headgroups’ curvature and the packing parameter inducing the formation of reverse hexagonal mesophase. It was detected that cubic mesophase transformed upon heating to hexagonal structures. The hexagonal mesophases, which were formed both immediately after preparation and after aging, remained stable at elevated temperatures. α-Chymotrypsinogen was solubilized into the obtained LLCs at relatively high concentration (up to 1wt%). The lattice parameter of the host LLCs exhibited a decrease as a function of the protein content. This process was assigned to partial dehydration of the GMO polar moieties in favor to CTA hydration. Generally speaking, the present study indicated that adding anionic to nonionic lipid is highly beneficial to gain additional compositional and structural characteristics of LLCs. [Copyright &y& Elsevier]

Abstract: This study develops a novel transdermal delivery vehicle for the enhanced delivery of sodium diclofenac (Na-DFC). The system utilizes the advantages of reversed hexagonal lyotropic liquid crystals (HIILC), combined with a peptide cell penetration enhancer (CPE), creating together an adaptable system that provides versatile options in the field of transdermal delivery. This enhancer peptide is based on a family of amphipatic peptides that exhibit improved membrane permeability. Franz permeation cell experiments revealed that the peptide enhancer (RALA) improved Na-DFC skin penetration of the liquid crystal 2.2-fold. We studied the structural effects of RALA solubilization on the HII mesophase. RALA acts as a chaotropic agent, interfering in the structure of the water, and causes a measurable swelling of the aqueous cylinders by 5Å. Small angle X-ray scattering (SAXS) and attenuated total reflectance–Fourier transform infrared (ATR–FTIR) measurements reveal enhanced hydration of the glycerol monooleate (GMO) headgroups and a 6.5% increase in the fraction of non-freezable water resulting from RALA incorporation. RALA caused a gradual increase in the GMO effective headgroup area due to the hydration, leading eventually to a transform of the hexagonal structure towards a lamellar one. Circular dichroism and ATR–FTIR measurements showed a conservation of the peptide structure when incorporated into the HII mesophase. The combined HIILC-CPE systems can serve as high potential vehicles for a variety of drugs, as they can easily be modified by varying the composition and temperature, according to the required dose and delivery features. [Copyright &y& Elsevier]

Two non-steroidal anti-inflammatory drugs (NSAIDs), sodium diclofenac (Na-DFC) and celecoxib (CLXB) were solubilized within cubic and lamellar mesophases as carriers for transdermal drug delivery. SD-NMR, SAXS, ATR-FTIR, and EPR measurements were performed to examine the systems’ characteristics and the interactions between the drugs and their hosting mesophases. The amphiphilic drug Na-DFC was found to incorporate at the interfaces of the cubic and lamellar mesophases and thus to act as a cosurfactant and a “structure stabilizer”. It increased the order degree and the interactions between the GMO molecules and led the systems toward denser packing. CLXB exhibits an opposite effect on the mesophases. Its solubilization within both systems is accompanied with significant channel swelling and decrease in the order degree. The hydrophobic, rigid and bulky CLXB behaves as a “structure breaker”, incorporated between the GMO tails, disturbing the mesophase packing and enhancing the repulsion at the tails region, limiting their close binding. Release experiments from Franz cells revealed that Na-DFC release is dependent on the quantity of water within the hosting mesophase as the water-rich formulation exhibits 1.5-fold enhancement in the release of the drug, compared to the lamellar phase. In contrast, CLXB release was not influenced by the water quantity, hinting that the release mechanisms of the drugs are different while Na-DFC diffuses from the water channels to the external phase, CLXB diffusion occurs through the continuous lipophilic region. The difference in the solubilization sites and interactions of each drug with the mesophases affect their release profiles and determine the preferred formulations for each drug's delivery vehicle. [ABSTRACT FROM AUTHOR]

Abstract: The potential of reverse hexagonal mesophases based on monoolein (GMO) and glycerol (as cosolvent) to facilitate the solubilization of proteins, such as insulin was explored. HII mesophases composed of GMO/decane/water were compared to GMO/decane/glycerol/water and GMO/phosphatidylcholine (PC)/decane/glycerol/water systems. The stability of insulin was tested, applying external physical modifications such as low pH and heat treatment (up to 70°C), in which insulin is known to form ordered amyloid-like aggregates (that are associated with several neurodegenerative diseases) with a characteristic cross β-pleated sheet structure. The impact of insulin confinement within these carriers on its stability, unfolding, and aggregation pathways was studied by combining SAXS, FTIR, and AFM techniques. These techniques provided a better insight into the molecular level of the “component interplay” in solubilizing and stabilizing insulin and its conformational modifications that dictate its final aggregate morphology. PC enlarged the water channels while glycerol shrank them, yet both facilitated insulin solubilization within the channels. The presence of glycerol within the mesophase water channels led to the formation of stronger hydrogen bonds with the hosting medium that enhanced the thermal stability of the protein and remarkably affected the unfolding process even after heat treatment (at 70°C for 60min). [Copyright &y& Elsevier]

Abstract: This paper describes the formation and characterization of liquid crystalline dispersions based on the hexagonal phase of GMO/tricaprylin/water. As a stabilizer of the soft particles dispersed in the aqueous phase, a non-ionic, non-polymeric surfactant—ethoxylated phytosterol with 30 oxyethylene units (PhEO) was utilized. In contrast to Pluronic copolymers, normally utilized in the stabilization of liquid crystalline dispersions with ordered inner structure, use of such non-polymeric surfactant is not a common practice in this field. We revealed how properties of these particles, such as internal structure, size, and stability, can be rationally modified by the concentration of the stabilizing agent and processing conditions. The physical stability of the hexosomes was further examined by the LUMiFuge technique. Structural effect of PhEO solubilization on the properties of the bulk HII mesophase system showed that phase behavior was greatly influenced following phase transitions: HII →HII +cubic→cubic+L α →L α . The decrease of hydrogen bonding of the hydroxyl and carbonyl groups of monoolein with water and simultaneous hydration of EO groups of PhEO appeared to be important for the observed behavior. The use of PhEO as a dispersant resulted in a soft matter multi-phase water dispersion with bimodal distribution of the particle population. Effective stabilization of hexosomes was obtained in an extremely narrow concentration range of PhEO (0.1–0.2wt%), coexisting with small vesicles and disordered particles. At higher PhEO content, particles had disordered inner structure, and unilamellar and multilamellar vesicles, at the expense of hexosomes in consequence of incorporation of the dispersant into the hexosome structure. PhEO was found to induce lamellar phase formation, introducing disorder into the hexagonal LLC and reducing their domain size. Finally, hexosomes were evaluated as delivery vehicles for the therapeutic peptide desmopressin. Sustained release of this drug was observed during the first 10h; however, permeation drastically increased in the 10–24h range. [Copyright &y& Elsevier]

Abstract: Liquid crystals are widely utilized as model systems to mimic biological processes where the phase behavior of lipids plays a mediating role. In various foods and pharmaceutical and biotechnical applications, the liquid crystalline phases formed by surfactants in an aqueous medium represent useful host systems for drugs, amino acids, peptides, proteins and vitamins. Various biologically active food additives are soluble in neither aqueous nor oil phase and require environmental protection against hydrolysis or oxidation. Lyotropic liquid crystals meet these requirements mainly due to their high solubilization capacities for hydrophilic, lipophilic and amphiphilic guest molecules. Moreover, recent studies demonstrated controlled and/or sustained release of solubilized molecules from different liquid crystalline matrices. This paper surveys the solubilization of hydrophilic, lipophilic and amphiphilic guest molecules for food applications and illustrates the corresponding structural transformations. Recent developments in liquid crystal characterization methods are discussed. [Copyright &y& Elsevier]

Abstract: In the present study we demonstrate that large quantities of cyclosporin A and three dermal penetration enhancers (phosphatidylcholine, ethanol, or Labrasol) can be solubilized into reverse hexagonal (HII) liquid crystalline structures composed of monoolein, tricaprylin, and water. The microstructural characteristics of these complex multi-component systems were elucidated by rheological, SAXS, and DSC measurements. Addition of up to 20 wt% phosphatidylcholine improved significantly the elastic properties of the systems (lower values of ) and increased the thermal stability of the mesophases enabling us to solubilize up to 6 wt% cyclosporin A and two other enhancers (Labrasol and ethanol) to obtain stable mesophases at physiological temperature. Rheological measurements revealed that solubilization of cyclosporin A alone has a destabilizing effect on the reverse hexagonal phases: it caused a deterioration in the elastic properties of the systems, leading to more liquid-like behavior and resulting in very short relaxation times (0.04–0.1 s). Labrasol, solubilized at high concentrations (up to 12 wt%) into the liquid crystals, also demonstrated a destabilizing effect on the HII structure: the decreasing elasticity of the system was attributed to Labrasol''s presumed locus at the interface and its ability to bind water, as shown by DSC measurements. Ethanol had a destabilizing effect similar to that of Labrasol, yet the effect appeared to be more pronounced, probably due to its higher water-binding capability. [Copyright &y& Elsevier]