Search

Suberin fatty acids (SFAs) isolated from outer birch bark were investigated as an antimicrobial agent and biomaterial in nanofibrous mats intended for wound treatment. Electrospinning (ES) was used in preparing the composite nonwoven nanomats containing chloramphenicol (CAM; as a primary antimicrobial drug), SFAs, and polyvinylpyrrolidone (as a carrier polymer for ES). The X-ray powder diffraction, differential scanning calorimetry, scanning electron microscopy, atomic force microscopy, and texture analysis were used for the physicochemical and mechanical characterization of the nanomats. ES produced nanofibrous mats with uniform structure and with an average fiber diameter ranging from 370 to 425 nm. Microcrystalline SFAs and crystalline CAM were found to undergo a solid-state transformation during ES processing. The ES process caused also the loss of CAM in the final nanofibers. In the texture analysis, the SFAs containing nanofibers exhibited significantly higher maximum detachment force to an isolated pig skin (p < 0.05) than that obtained with the reference nanofibers. CAM exists in an amorphous form in the nanofibers which needs to be taken into account in controlling the physical storage stability. In conclusion, homogeneous composite nanofibrous mats for wound healing can be electrospun from the ternary mixture(s) of CAM, SFAs, and polyvinylpyrrolidone., (Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.)

We showed that the addition of suberin fatty acids (SFAs) even at small concentrations significantly improves the water vapor barrier properties of hydroxypropyl methylcellulose (HPMC) films. SFAs were isolated from the outer birch bark using extractive hydrolysis. The effects of SFAs on the film formation of aqueous HPMC were investigated with free films plasticized with polyethylene glycol (PEG 400). Special attention was paid on the physical solid-state, moisture barrier and mechanical stress-strain properties of films intended for tablet film coatings. Topography and surface morphology, glass transition temperature (Tg), tensile strength, Young's modulus, and water vapor permeation (WVP) of films were studied. The addition of SFAs lowered the Tg of films suggesting partial enhancement in film plasticization. The WVP of films decreased with increasing SFAs concentration up to 15% (calculated as a % w/w from a polymer weight). The WVP value for a non-suberized reference film and suberized film plasticized with PEG 400 was 2.13×10(-6) and 0.69[×10(-6) g/(mm(2)×h)×mm/Pa], respectively. The addition of SFAs impaired the mechanical stress-strain properties of HPMC films by reducing the deformation capacity of film. In conclusion, the film properties and performance of aqueous HPMC can be modified by including SFAs in the films., (Copyright © 2015 Elsevier B.V. All rights reserved.)