Search

In the future, a new superconducting (SC) continuous wave (CW) high intensity heavy ion HElmholtz LInear ACcelerator (HELIAC) should provide ion beams with maximum beam energy above the Coulomb barrier for the Super Heavy Element program at GSI (Gesellschaft für Schwerionenforschung, in Engl.: Association for Heavy Ion Research). The HELIAC consists of a SC main accelerator supplied by a normal conducting injector, which comprises an electron cyclotron resonance ion source, a radio-frequency quadrupole, and two separate interdigital H-mode drift-tube linear accelerator cavities, based on an Alternating Phase Focusing (APF) scheme. Together, both cavities will accelerate ions from 300 to 1400 keV/u with only one external quadrupole triplet for transverse focusing in between. Due to the demanding requirements of the APF concept on the voltage distribution along the beam axis on the one hand and the CW operation on the other hand, the optimization of each cavity concerning RF, mechanical, and thermal properties is crucial for the successful operation of the HELIAC injector. [ABSTRACT FROM AUTHOR]

The upcoming commissioning of the superconducting (SC) continuous wave Helmholtz linear accelerators first of series cryomodule is going to demand precise alignment of the four internal SC cavities and two SC solenoids. For optimal results, a beam-based alignment method is used to reduce the misalignment of the whole cryomodule, as well as its individual components. A symmetric beam of low transverse emittance is required for this method, which is to be formed by a collimation system. It consists of two separate plates with milled slits, aligned in the horizontal and vertical direction. The collimation system and alignment measurements are proposed, investigated, and realized. The complete setup of this system and its integration into the existing environment at the GSI High Charge State Injector are presented, as well as the results of the recent reference measurements. [ABSTRACT FROM AUTHOR]

The standalone superconducting continuous wave heavy ion linac HELIAC (HElmholtz LInear ACcelerator) is a common project of GSI Helmholtz Centre for Heavy Ion Research and Helmholtz Institute Mainz (HIM) under key support of Goethe University Frankfurt (IAP) and in collaboration with National Research Nuclear University MEPhI and NRC "Kurchatov Institute" ITEP. In 2017 the first superconducting section of the linac has been successfully commissioned and extensively tested with beam at GSI. The measurements sufficiently present the capability of 216.816 MHz multi-gap Crossbar H-mode (CH) DTL-structures. An acceleration of heavy ions up to the design beam energy and beyond has been reached with the setup. The required acceleration gain of 0.5 MeV/u was achieved with heavy ion beams even above the design mass-to-charge ratio at maximum available beam intensity and full beam transmission. Recently the HELIAC beam dynamics concept foresees twelve superconducting CH-DTL cavities, assembled in four cryomodules. Each module is equipped with three accelerating CH structures, two superconducting solenoids for transverse beam focusing and a Spoke-type buncher for longitudinal beam matching. The linac is used to accelerate ions with a mass-to-charge ratio up to A ∕ z = 6 from the input energy of 1.4 MeV/u up to the smoothly variable output energy between 3.5 MeV/u and 7.3 MeV/u. The manuscript presents the reference beam dynamics layout of the entire HELIAC facility. [ABSTRACT FROM AUTHOR]