Search

This paper refers on the outcomes of an experimental study developed in an industrial plant in the centre of Italy in which dust emission represents an important annoyance affecting the whole activity and so requiring to be managed in order to guarantee legal compliance but, above all, a safe workplace. This case study consists in the assessment of the efficacy of different reduction measures designed to avoid and, where not possible, to reduce dust emissions from stockpiles. According to a monitoring campaign based on field sampled data, these areas were identified as the most pollutant sources in the plant itself and many solutions were taken into consideration to reduce the emission due to wind erosion. Under these conditions wind fences represent a significant solution to be tested in addition to usual measures which are usually installed. In particular some simulations are performed in order to define the variation of wind velocity all around the stockpile and so to select and design the best solution and configuration to reduce the emission of fugitive dust from stockpiles when caused by wind erosion. [ABSTRACT FROM AUTHOR]

This paper refers on the result of an experimental work developed at an Italian limestone quarry. In such a site the pollutant emissions connected with standard activities such as drilling, blasting or crushing materials represent primary dust sources and contribute to determine the PM10 concentration all over the quarry plant and the surrounding area. Moreover many studies underlined the important contribution of secondary sources in the assessment of airborne dust climate. These ones, generally constituted by stockpiling or unpaved hauling roads, especially if in dry conditions and exposed to wind erosion, may affect OH&S environment and generate a massive airborne dust impact on the surrounding receptors. In this study, an emission model, based on emission factors is set up and a simulation is performed to define the PM10 concentration in the site. Then according with a sampling campaign, the quality of obtained results is verified and the two data sets are compared. The data analysis shows encouraging results that may assume a more general suitability if further studies should confirm this outcome. [ABSTRACT FROM AUTHOR]

This paper refers on the result of an experimental work developed at an Italian limestone quarry. A simple risk prediction method is tested to assess the professional exposure to respirable dust of those workers involved in common quarrying activities such as drilling, blasting and crushing materials. The evaluation is performed by means of the FAST method (Functional Analysis Space Technique) which is based upon the discretization in time and space of dust emission over the working area. When this pattern proves to well fit the operative conditions, a significant reduction of costs and efforts associated to the monitoring activities may be appreciated. The results are compared with samples collected during a second campaign in which personal dosimeters were used to assess the personal dose of the same workers. The application seems to encourage further research especially in those sites in which workers are involved in job rotation and the daily dose may change according with different activities performed during the working day. [ABSTRACT FROM AUTHOR]