Search

Developing color-tunable phosphors via the introduction of co-doping activators and sensitizers to the host with energy transfer processes has been a state-of-the-art topic for a long time. In this work, novel emission-tunable oxyapatites-type Ba 10 (PO 4 ) 6 O:Eu 2+ ,Tb 3+ /Li + phosphors were prepared via a high temperature solid state reaction for the applications in white light emitting diodes ( w -LEDs) with higher color rendering index. Tunable colors from blue to green can be realized in the Ba 10 (PO 4 ) 6 O:Eu 2+ ,Tb 3+ /Li + by varying the relative ratios of Eu 2+ to Tb 3+ , showing good absorption in the range of 230–400 nm. The energy transfer mechanism from Eu 2+ to Tb 3+ ions was demonstrated to be a quadrupole-quadrupole interaction by combining the Inokuti-Hirayama (I H) model and Reisfeld's approximation. Importantly, a prototype white lamp was packaged by mixing Ba 9.83 (PO 4 ) 6 O: 0.03Eu 2+ , 0.07Tb 3+ , 0.07Li + and commercial red phosphor CaAlSiN 3 : Eu 2+ , and the lamp exhibits a higher color rendering index (Ra = 92 and R9 = 56) and warm correlated color temperature of 4361 K for the actual application. Better luminescent properties compared to commercial Y 3 A l5 O 12 :Ce 3+ -based w -LEDs, indicating that Ba 10 (PO 4 ) 6 O: Eu 2+ , Tb 3+ /Li + phosphors are emerging as potential phosphor-converted w -LEDs. [ABSTRACT FROM AUTHOR]

A series of novel KLaSr3−x(PO4)3F:xEu2+ phosphors were synthesized for the first time. The crystal structure, photoluminescence properties, concentration quenching, decay analysis, and the temperature dependent luminescence properties were investigated in detail. The unit cell parameters for KLaSr3(PO4)3F were estimated to be a = 9.8997 Å, c = 7.4075 Å, and V = 628.7 Å3. The photoluminescence excitation spectrum of KLaSr3(PO4)3F:Eu2+ shows a broad band from 225 nm to 450 nm with a maximum at about 320 nm. KLaSr3−x(PO4)3F:xEu2+ phosphors exhibit a wide emission band ranging from 425 to 550 nm. KLaSr3(PO4)3F:Eu2+ phosphors exhibit good thermal stability up to 423 K. KLaSr3(PO4)3F:Eu2+ was fabricated with commercial green (Ba,Sr)SiO4:Eu2+ and red CaAlSiN3:Eu2+ phosphors to obtain a white-light-emitting diode. All the results demonstrate that KLaSr3(PO4)3F:Eu2+ are promising blue phosphors for white-light ultraviolet light-emitting diode applications. [ABSTRACT FROM PUBLISHER]

Single-phase Ba 10− x − y (PO 4 ) 6 O: x Eu 2+ , y Mn 2+ samples with apatite structure have been synthesized via a solid-state reaction method. The phase structure, luminescence properties, lifetime, PL thermal stability, as well as fluorescence decay curves of the samples were investigated. Effective energy transfer occurs from Eu 2+ to Mn 2+ in Ba 10 (PO 4 ) 6 O and a possible mechanism of the energy-transfer from Eu 2+ to Mn 2+ is proposed. The critical distances R c was calculated by concentration quenching and turned out to be about 0.817 nm ( x c =0.21). The CIE and thermally stable luminescence behaviors of Ba 9.94 (PO 4 ) 6 O:0.06Eu 2+ phosphor were also studied in detail. All the results indicate that Ba 10− x − y (PO 4 ) 6 O: x Eu 2+ , y Mn 2+ phosphors have potential applications as near UV-convertible phosphors for white light-emitting diodes. [ABSTRACT FROM AUTHOR]

A series of novel luminescent phosphors Sr 10 (PO 4 ) 6 O:Eu 2+ with apatite structure were synthesized via a high temperature solid-state reaction. The phase structure, photoluminescence (PL) properties, the PL thermal stability, as well as the fluorescence decay curves of the samples were investigated to characterize the resulting samples, and the selected Sr 9.97 (PO 4 ) 6 O:0.03Eu 2+ phosphor exhibits strong thermal quenching resistance, retaining the luminance of 88.73% at 150 °C. The quenching concentration of Eu 2+ in Sr 10 (PO 4 ) 6 O was about 0.03 attributing to the dipole–quadrupole interaction. The Sr 10 (PO 4 ) 6 O:Eu 2+ phosphor exhibited a broad-band blue emission at 439 nm upon excitation at 346 nm. The results indicate that Sr 10 (PO 4 ) 6 O:Eu 2+ phosphors have potential applications as near UV-convertible phosphors for white-light UV LEDs. [ABSTRACT FROM AUTHOR]

A series of new luminescent emission-tunable phosphors Sr 2 La 8 (SiO 4 ) 6 O 2 :Ce 3+ , Tb 3+ with apatite structure have been synthesized by a high temperature solid-state reaction. The phase structure, photoluminescence emission and excitation spectra, lifetime, as well as the effect of Tb 3+ concentration are investigated to characterize the resulting samples. The critical distance was calculated to be 8.26 Å by using the concentration quenching method. The intense green emission was observed in the Sr 2 La 8 (SiO 4 ) 6 O 2 :Ce 3+ , Tb 3+ phosphors on the basis of the efficient energy transfer from Ce 3+ to Tb 3+ with an efficiency of 68.55%. And a possible mechanism of the energy-transfer from Ce 3+ to Tb 3+ ion is also proposed. The results indicate that Sr 2 La 8 (SiO 4 ) 6 O 2 :Ce 3+ , Tb 3+ phosphors have potential applications to be used as near UV-convertible phosphors for white light-emitting diodes because of the broad excitation in the near-ultraviolet range and the efficient green emission light. [ABSTRACT FROM AUTHOR]

Abstract: A series of new luminescent emission-tunable phosphors La6Ba4(SiO4)6F2:Ce3+,Tb3+ with apatite structure have been synthesized by a high temperature solid-state reaction. X-ray diffraction, photoluminescence (PL) emission and excitation spectra, lifetime, as well as the effect of Tb3+ concentration were employed to characterize the resulting samples. The PL spectrum of La6Ba4(SiO4)6F2:Ce3+,Tb3+ phosphor contains both the asymmetric broad-band blue emission (Ce3+ ion) and the line-type green emission (Tb3+ ion). The increased Tb3+ concentration induced the emitting colors to shift from blue to green region by the naked eye. Meanwhile, the energy transfer between Ce3+ and Tb3+ is thoroughly investigated, and the energy-transfer efficiency from Ce3+ to Tb3+ ion is also calculated. The results indicated that these phosphors could be considered as double emission phosphors for n-UV excited white light-emitting diodes. [Copyright &y& Elsevier]

Single-phase Ba10-x-y (PO4)6O:xEu2+,yMn2+ phosphors are prepared by solid state reaction of stoichiometric mixtures of BaCO3, NH4H2PO4, Eu2O3, and MnCO3 (alumina crucibles, flowing 10% H2/90% N2, 1200 °C, 5 h). [ABSTRACT FROM AUTHOR]

The Ca 9 La(PO 4 ) 5 (SiO 4 )Cl 2 :Dy 3+ (CLPSCl:Dy 3+ ) powder phosphor with apatite structure has been successfully synthesized via high-temperature solid state method. Single phase in such phosphor was verified through X-ray diffraction (XRD) technique. The Dy ions concentration dependent luminescence properties including emission, excitation and lifetimes of Dy ions were characterized using photoluminescence (PL) spectroscopy. The results showed that CLPSCl:Dy 3+ phosphor could efficiently assimilate the n -UV light and emit blue (~486 nm) and yellow light (~578 nm), originating from the f-f transitions of Dy 3+ . The critical Dy 3+ quenching concentration (QC) was determined to be about 12 mol%. The concentration quenching mechanism was also determined to be dipole–dipole interaction. [ABSTRACT FROM AUTHOR]

Whitlockite-type structure phosphors have been widely studied due to their adjustable chemical composition and abundant crystal location. Whitlockite-type phosphors can be doped with rare earth elements to achieve the emission of warm white light. White light-emitting diodes (w -LEDs) have become increasingly popular and play a significant role in many applications, such as Biosensing and fluorescent labeling. In this work, The Ca 2.6 K 0.2 La 0.2 (PO 4) 2 (CKLP) whitlockite-type phosphors co-doped with Dy3+ and Sm3+ were entered via a high-temperature solid-phase reaction. Their crystal structure, luminescence characteristics, and temperature sensitivity were explored in detail. Through doping Dy3+ and Sm3+, can obtain white light and warm white light. As the concentration of Sm3+ increased, their lifetime decreased from 0.483 ms to 0.059 ms, confirming interionic energy transfer in the host. The CKLP: 0.06Dy3+, 0.06Sm3+ phosphor prepared by Fluorescence Intensity Ratio (FIR) technology has suitable temperature sensing performance. Its relative sensitivity (Sr) and complete sensitivity (Sa) are high up to 4.48 × 10−3 k−1 and 1.021%K−1 at 298 K. The results show that CKLP: Dy3+ and Sm3+ phosphors used in w -LEDs and display devices will present excellent application potential in new optical thermometry. • The whitlockite-type structure phosphor realized white light emission. Obtained excellent color temperature coordinates, high sensitivity and realized the control of warm white light. • The whitlockite-type structure phosphors are a candidate material for non-contact optical temperature sensing and have potential anti-counterfeiting applications. [ABSTRACT FROM AUTHOR]

An anti-defect engineering strategy, inspired by photocatalytic and photovoltaic materials, was proposed to develop high-efficiency phosphors in whitlockite families. Significant enhancement of photoluminescence intensity (2.46 times), thermal stability (87.92% at 150 °C), cathodoluminescence intensity (3.34 times), quantum efficiency (IQE sharply up to nearly 100%) were simultaneously realized by constructing a rigid structure and removing vacancy defects. The developed phosphors exhibited promising applications in the fields of warm-white LEDs, plant growth lighting and information security. [Display omitted] • Anti-defect engineering strategy is proposed to develop high-efficiency phosphors. • The internal quantum yield is sharply improved from 38.90% to 99.07%. • The mechanism of improvement is revealed by defect-related characterizations. • DFT calculation shows the positive role of Debye temperature and alkali metal ions. • Promising applications in warm-white LEDs / plant-growth lighting are demonstrated. Lacking an effective strategy to simultaneously address the challenges of quantum efficiency, luminescence intensity and thermal stability has become the key bottleneck for further development and large-scale application of solid-state lighting technology. Herein, inspired by the defect-engineering used in photoelectrocatalytic and photovoltaic materials, we acted in a diametrically opposite way and unprecedentedly proposed an anti-defect engineering strategy to develop high-efficiency phosphors. By constructing a rigid structure and introducing alkali metals M to remove cation vacancy defects, similar to building blocks and jigsaw puzzle, we developed three groups of whitlockite phosphors, namely Ca 3- x Sr x (PO 4) 2 :Ce3+, Ca 3 (PO 4) 2 :Ce3+, M and (Ca 0.5 Sr 0.5) 3 (PO 4) 2 :Ce3+,Na+,Mn2+, and synchronously realized the significant enhancement of photoluminescence intensity (2.46 times), thermal stability (87.92% at 150 °C), cathodoluminescence intensity (3.34 times), quantum yield (from 38.90% to 99.07%). We characterized the defect concentration by positron annihilation technique (PAT), and calculated Debye temperature (ΘD) and simulated the occupation of M according to DFT theory to reveal the improvement mechanism. Some advanced applications were also explored in this work, including warm-white LEDs, plant growth lighting and information security. The anti-defect engineering proposed in this work may contribute to the further development of high-efficiency phosphors for the next-generation smart solid-state lighting technologies. [ABSTRACT FROM AUTHOR]