Search

Ligament sprains, defined as tearing of bands of fibrous tissues within ligaments, account for a majority of injuries to the foot and ankle complex in field-based sports. External rotation of the foot is considered the primary injury mechanism of syndesmotic ankle sprains with concomitant flexion and inversion/eversion associated with particular patterns of ligament trauma. However, the influence of the magnitude and direction of loading vectors to the ankle on the in situ stress state of the ligaments has not been quantified in the literature. The objective of the present study was to search for the maximum injury tolerance of a human foot with an acceptable subfailure distribution of individual ligaments. We used a previously developed and comprehensively validated foot and ankle model to reproduce a range of combined foot rotation experienced during high-risk sports activities. Biomechanical computational investigation was performed on initial foot rotation from [Formula: see text] of plantar flexion to [Formula: see text] of dorsiflexion, and from [Formula: see text] of inversion to [Formula: see text] of eversion prior to external rotation. Change in initial foot rotation shifted injury initiation among different ligaments and resulted in a wide range of injury tolerances at the structural level (e.g., 36-125 Nm of rotational moment). The observed trend was in agreement with a parallel experimental study that initial plantar flexion decreased the incidence of syndesmotic injury compared to a neutral foot. A mechanism of distributing even loads across ligaments subjected to combined foot rotations was identified. This mechanism is potential to obtain the maximum load-bearing capability of a foot and ankle while minimizing the injury severity of ligaments. Such improved understanding of ligament injuries in athletes is necessary to facilitate injury management by clinicians and countermeasure development by biomechanists.

Ligament sprains account for a majority of injuries to the foot and ankle complex among athletic populations. The infeasibility of measuring the in situ response and load paths of individual ligaments has precluded a complete characterization of their mechanical behavior via experiment. In the present study a fiber-based modeling approach of in situ ankle ligaments was developed and validated for determining the heterogeneous force-elongation characteristics and the consequent injury patterns. Nine major ankle ligaments were modeled as bundles of discrete elements, corresponding functionally to the structure of collagen fibers. To incorporate the progressive nature of ligamentous injury, the limit strain at the occurrence of fiber failure was described by a distribution function ranging from 12% to 18% along the width of the insertion site. The model was validated by comparing the structural kinetic and kinematic response obtained experimentally and computationally under well-controlled foot rotations. The simulation results replicated the 6 degree-of-freedom bony motion and ligamentous injuries and, by implication, the in situ deformations of the ligaments. Gross stiffness of the whole ligament derived from the fibers was comparable to existing experimental data. The present modeling approach provides a biomechanically realistic, interpretable and computationally efficient way to characterize the in situ ligament slack, sequential and heterogeneous uncrimping of collagen fascicles and failure propagation as the external load is applied. Applications of this model include functional ankle joint mechanics, injury prevention and countermeasure design for athletes., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The mechanical behavior of ankle ligaments at the structural level can be characterized by force-displacement curves in the physiologic phase up to the initiation of failure. However, these properties are difficult to characterize in vitro due to the experimental difficulties in replicating the complex geometry and non-uniformity of the loading state in situ. This study used a finite element parametric modeling approach to determine the in situ mechanical behavior of ankle ligaments at neutral foot position for a mid-sized adult foot from experimental derived bony kinematics. Nine major ankle ligaments were represented as a group of fibers, with the force-elongation behavior of each fiber element characterized by a zero-force region and a region of constant stiffness. The zero-force region, representing the initial tension or slackness of the whole ligament and the progressive fiber uncrimping, was identified against a series of quasi-static experiments of single foot motion using simultaneous optimization. A range of 0.33-3.84mm of the zero-force region was obtained, accounting for a relative length of 6.7±3.9%. The posterior ligaments generally exhibit high-stiffness in the loading region. Following this, the ankle model implemented with in situ ligament behavior was evaluated in response to multiple loading conditions and proved capable of predicting the bony kinematics accurately in comparison to the cadaveric response. Overall, the parametric ligament modeling demonstrated the feasibility of linking the gross structural behavior and the underlying bone and ligament mechanics that generate them. Determination of the in situ mechanical properties of ankle ligaments provides a better understanding of the nonlinear nature of the ankle joint. Applications of this knowledge include functional ankle joint mechanics and injury biomechanics., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Ligament sprains account for a majority of injuries to the foot and ankle complex, but ligament properties have not been understood well due to the difficulties in replicating the complex geometry, in situ stress state, and non-uniformity of the strain. For a full investigation of the injury mechanism, it is essential to build up a foot and ankle model validated at the level of bony kinematics and ligament properties. This study developed a framework to parameterize the ligament response for determining the in situ stress state and heterogeneous force-elongation characteristics using a finite element ankle model. Nine major ankle ligaments and the interosseous membrane were modeled as discrete elements corresponding functionally to the ligamentous microstructure of collagen fibers and having parameterized toe region and stiffness at the fiber level. The range of the design variables in the ligament model was determined from existing experimental data. Sensitivity of the bony kinematics to each variable was investigated by design of experiment. The results highlighted the critical role of the length of the toe region of the ligamentous fibers on the bony kinematics with the cumulative influence of more than 95%, while the fiber stiffness was statistically insignificant with an influence of less than 1% under the given variable range and loading conditions. With the flexibility of variable adjustment and high computational efficiency, the presented ankle model was generic in nature so as to maximize its applicability to capture the individual ligament behaviors in future studies.