Search

Light detection and ranging (LiDAR) is a widely used technology for the acquisition of three-dimensional (3D) information about a wide variety of physical objects and environments. However, before conducting a campaign, a test is typically conducted to assess the potential of the utilized algorithm for information retrieval. It might not be a real campaign but rather a simulation to save time and costs. Here, a multi-platform LiDAR simulation model considering the location, direction, and wavelength of each emitted laser pulse was developed based on the large-scale remote sensing (RS) data and image simulation framework (LESS) model, which is a 3D radiative transfer model for simulating passive optical remote sensing signals using the ray tracing algorithm. The LESS LiDAR simulator took footprint size, returned energy, multiple scattering, and multispectrum LiDAR into account. The waveform and point similarity were assessed with the LiDAR module of the discrete anisotropic radiative transfer (DART) model. Abstract and realistic scenes were designed to assess the simulated LiDAR waveforms and point clouds. A waveform comparison in the abstract scene with the DART LiDAR module showed that the relative error was lower than 1%. In the realistic scene, airborne and terrestrial laser scanning were simulated by LESS and DART LiDAR modules. Their coefficients of determination ranged from 0.9108 to 0.9984 . Their mean was 0.9698 . The number of discrete returns fitted well and the coefficient of determination was 0.9986 . A terrestrial point cloud comparison in the realistic scene showed that the coefficient of determination between the two sets of data could reach 0.9849 . The performance of the LESS LiDAR simulator was also compared with the DART LiDAR module and HELIOS++. The results showed that the LESS LiDAR simulator is over three times faster than the DART LiDAR module and HELIOS++ when simulating terrestrial point clouds in a realistic scene. The proposed LiDAR simulator offers two modes for simulating point clouds: single-ray and multi-ray modes. The findings demonstrate that utilizing a single-ray simulation approach can significantly reduce the simulation time, by over 28 times, without substantially affecting the overall point number or ground pointswhen compared to employing multiple rays for simulations. This new LESS model integrating a LiDAR simulator has great potential in terms of simultaneously simulating LiDAR data and optical images based on the same 3D scene and parameters. As a proof of concept, the normalized difference vegetation index (NDVI) results from multispectral images and the vertical profiles from multispectral LiDAR waveforms were simulated and analyzed. The results showed that the proposed LESS LiDAR simulator can fulfill its design goals. [ABSTRACT FROM AUTHOR]

Light detection and ranging (LiDAR) data can provide 3D structural information of objects and are ideal for extracting individual tree parameters, and individual tree segmentation (ITS) is a vital step for this purpose. Various ITS methods have been emerging from airborne LiDAR scanning (ALS) or unmanned aerial vehicle LiDAR scanning (ULS) data. Here, we propose a new individual tree segmentation method, which couples the classical and efficient watershed algorithm (WS) and the newly developed connection center evolution (CCE) clustering algorithm in pattern recognition. The CCE is first used in ITS and comprehensively optimized by considering tree structure and point cloud characteristics. Firstly, the amount of data is greatly reduced by mean shift voxelization. Then, the optimal clustering scale is automatically determined by the shapes in the projection of three different directions. We select five forest plots in Saihanba, China and 14 public plots in Alpine region, Europe with ULS or ALS point cloud densities from 11 to 3295 pts/m2. Eleven ITS methods were used for comparison. The accuracy of tree top detection and tree height extraction is estimated by five and two metrics, respectively. The results show that the matching rate (Rmatch) of tree tops is up to 0.92, the coefficient of determination (R2) of tree height estimation is up to.94, and the minimum root mean square error (RMSE) is 0.6 m. Our method outperforms the other methods especially in the broadleaf forests plot on slopes, where the five evaluation metrics for tree top detection outperformed the other algorithms by at least 11% on average. Our ITS method is both robust and efficient and has the potential to be used especially in coniferous forests to extract the structural parameters of individual trees for forest management, carbon stock estimation, and habitat mapping. [ABSTRACT FROM AUTHOR]

Traditional Light Detection and Rangings (LiDARs) can quickly collect high-accuracy of three-dimensional (3D) point cloud data at a designated wavelength (i.e., cannot obtain hyperspectral data), while the passive hyperspectral imager can collect rich spectral data of ground objects, but are lack of 3D spatial data. This paper presents one innovative study on the design of airborne-oriented supercontinuum laser hyperspectral (SCLaHS) LiDAR with 50 bands covering 400 nm to 900 nm at a spectral resolution of 10 nm and ground sampling distance (GSD) of 0.5 m. The major innovations include (1) development of the high-power narrow-pulse supercontinuum laser source covering 400 nm to 900 nm with 50 bands using multi-core microstructure fibre, all-polarization maintaining fibre and ultra-long cavity structure, (2) a miniaturized aberration correction holographic concave grating spectroscopic and streak tube technique are developed for 50 bands laser echoes detection at high spectral-spatial-temporal resolution and dynamic airborne platform, and (3) the algorithm theoretic basis for SCLaHS LiDAR point cloud data 3D geodetic coordination calculation, including in-flight airborne calibration algorithm. The initial experimental results demonstrated that the designed SCLaHS LiDAR is doable, and a prototype of the (SCLaHS) LiDAR intends to be implemented. [ABSTRACT FROM AUTHOR]

Occlusion effect, an inherent problem of terrestrial laser scanning (TLS) measurements, limits the potential of TLS data in tree attribute estimation. Multiple scans seek to mitigate this effect to provide enhanced scan completeness. However, the numbers and locations of the scans (i.e., the scan design) are usually determined via a subjective assessment of the tree density, spatial patterns of trees, and attributes to be derived. These could cause suboptimal scan completeness and limit tree attribute estimation. This study proposed an iterative-mode scan design to minimize the occlusion effect. First, we introduced a PoTo index based on visibility analysis to evaluate how many trees can be scanned from a location and to select effective candidates for the optimal TLS location. Second, we introduced a cumulative degree of ring closure (CDRC) to quantify the scan completeness for each candidate and determine the optimal TLS location. The TLS data sets of virtual forests with field-measured and synthetic plot parameter settings were simulated according to iterative- and regular-mode designs by using a Heidelberg light detection and ranging (LiDAR) Operations Simulator (HELIOS). The results demonstrated that an iterative-mode design can improve the scan completeness of trees compared to the regular-mode design. The tree attribute (diameter at breast height (DBH), tree height, stem curve, and crown volume) estimates of the iterative-mode design were less erroneous than those of the regular-mode design (e.g., the root-mean-square error (RMSE) could decrease the stem curve estimation by 38% and the crown volume estimation by 15%). This study suggests that the iterative-mode design can obtain an improved quality of the TLS data, especially for dense stands. [ABSTRACT FROM AUTHOR]

Background: The universal occurrence of randomly distributed dark holes (i.e., data pits appearing within the tree crown) in LiDAR-derived canopy height models (CHMs) negatively affects the accuracy of extracted forest inventory parameters. Methods: We develop an algorithm based on cloth simulation for constructing a pit-free CHM. Results: The proposed algorithm effectively fills data pits of various sizes whilst preserving canopy details. Our pit-free CHMs derived from point clouds at different proportions of data pits are remarkably better than those constructed using other algorithms, as evidenced by the lowest average root mean square error (0.4981 m) between the reference CHMs and the constructed pit-free CHMs. Moreover, our pit-free CHMs show the best performance overall in terms of maximum tree height estimation (average bias = 0.9674 m). Conclusion: The proposed algorithm can be adopted when working with different quality LiDAR data and shows high potential in forestry applications. [ABSTRACT FROM AUTHOR]

The airborne laser scanner (ALS) provides great potential for mapping the leaf area index (LAI) at the landscape scale using grid cell statistics, while its application is restricted by the lack of clumping information, which has been an unsolved issue highlighted for a long time. ALS generally provides an effective LAI because its footprint is too large to capture small gaps to apply traditional ground-based clumping correction methods. Here, we present a grid cell method based on path length distribution model to calculate the clumping-corrected LAI using ALS data without the requirement of additional field measurements. We separated the within- and between-crown areas to consider between-crown clumping, and used the path length distribution as estimated by local canopy height distribution to consider 3-D foliage profile and within-crown clumping. The path length distribution model takes advantage of the 3-D information rather than the gap size distribution, thus avoiding the limitation of large ALS footprint. With the 0.4-m-footprint ALS data, the results are generally promising and a multilevel clumping analysis is consistent with landscape flown. The ALS LAIs of different resolutions are consistent, with a difference of less than 5% from 5- to 250-m resolutions. Due to its consistency and simple configuration, the method provides an opportunity to map the clumping-corrected LAI operationally and strengthens the ability of airborne lidar to monitor vegetation change and validate the satellite product. This grid cell method based on path length distribution is worth further testing and application using more recent laser technology. [ABSTRACT FROM AUTHOR]

Vegetation cover estimation for overstory and understory layers provides valuable information for modeling forest carbon and water cycles and refining forest ecosystem function assessment. Although previous studies demonstrated the capability of light detection and ranging (LiDAR) in the three-dimensional (3D) characterization of forest overstory and understory communities, the high cost inhibits its application in frequent and successive survey tasks. Low-cost commercial red–green–blue (RGB) cameras mounted on unmanned aerial vehicles (UAVs), as LiDAR alternatives, provide operational systems for simultaneously quantifying overstory crown cover (OCC) and understory vegetation cover (UVC). We developed an effective method named back-projection of 3D point cloud onto superpixel-segmented image (BAPS) to extract overstory and forest floor pixels using 3D structure-from-motion (SfM) point clouds and two-dimensional (2D) superpixel segmentation. The OCC was estimated from the extracted overstory crown pixels. A reported method, called half-Gaussian fitting (HAGFVC), was used to segement green vegetation and non-vegetation pixels from the extracted forest floor pixels and derive UVC. The UAV-based RGB imagery and field validation data were collected from eight forest plots in Saihanba National Forest Park (SNFP) plantation in northern China. The consistency of the OCC estimates between BAPS and canopy height model (CHM)-based methods (coefficient of determination: 0.7171) demonstrated the capability of the BAPS method in the estimation of OCC. The segmentation of understory vegetation was verified by the supervised classification (SC) method. The validation results showed that the OCC and UVC estimates were in good agreement with reference values, where the root-mean-square error (RMSE) of OCC (unitless) and UVC (unitless) reached 0.0704 and 0.1144, respectively. The low-cost UAV-based observation system and the newly developed method are expected to improve the understanding of ecosystem functioning and facilitate ecological process modeling. [ABSTRACT FROM AUTHOR]

Separating point clouds into ground and non-ground points is a preliminary and essential step in various applications of airborne light detection and ranging (LiDAR) data, and many filtering algorithms have been proposed to automatically filter ground points. Among them, the progressive triangulated irregular network (TIN) densification filtering (PTDF) algorithm is widely employed due to its robustness and effectiveness. However, the performance of this algorithm usually depends on the detailed initial terrain and the cautious tuning of parameters to cope with various terrains. Consequently, many approaches have been proposed to provide as much detailed initial terrain as possible. However, most of them require many user-defined parameters. Moreover, these parameters are difficult to determine for users. Recently, the cloth simulation filtering (CSF) algorithm has gradually drawn attention because its parameters are few and easy-to-set. CSF can obtain a fine initial terrain, which simultaneously provides a good foundation for parameter threshold estimation of progressive TIN densification (PTD). However, it easily causes misclassification when further refining the initial terrain. To achieve the complementary advantages of CSF and PTDF, a novel filtering algorithm that combines cloth simulation (CS) and PTD is proposed in this study. In the proposed algorithm, a high-quality initial provisional digital terrain model (DTM) is obtained by CS, and the parameter thresholds of PTD are estimated from the initial provisional DTM based on statistical analysis theory. Finally, PTD with adaptive parameter thresholds is used to refine the initial provisional DTM. These contributions of the implementation details achieve accuracy enhancement and resilience to parameter tuning. The experimental results indicate that the proposed algorithm improves performance over their direct predecessors. Furthermore, compared with the publicized improved PTDF algorithms, our algorithm is not only superior in accuracy but also practicality. The fact that the proposed algorithm is of high accuracy and easy-to-use is desirable for users. [ABSTRACT FROM AUTHOR]

Many studies have been focusing on reconstructing the branch skeleton of a three-dimensional (3D) tree structure that is based on photos or point clouds scanned by a terrestrial laser scanner (TLS), but leaves, as the important component of a tree, are often ignored or simplified because of their complexity. Therefore, we develop a voxel-based method to add leaves to a reconstructed 3D branches structure based on TLS point clouds. The location and size of each leaf depend on the spatial distribution and density of leaves points in the voxel. We reconstruct a small 3D scene with four realistic 3D trees and a virtual tree (including trunk, branches, and leaves), and validate the structure of each tree through the directional gap fractions calculated based on simulated point clouds of this reconstructed scene by the ray-tracing algorithm. The results show good coherence with those from measured point clouds data. The relative errors of the directional gap fractions are no more than 4.1%, though the method is limited by the effects of point occlusion. Therefore, this method is shown to give satisfactory consistency both visually and in the quantitative evaluation of the 3D structure. [ABSTRACT FROM AUTHOR]

Vegetation cover fraction (fCover) and related quantities are basic yet critical vegetation structure variables in various disciplines and applications. Ground- and aerial-based proximal and remote sensing techniques have been widely adapted across multiple spatial extents. However, the definitions of fCover-related nomenclatures have not yet been fully standardized, leading to confusing terms and making comparing historic measures difficult. With the issues potentially arising from an increasing diversity of fCover and related quantities estimation methods and corresponding uncertainties, there is also a growing need to spread knowledge on the current advances, challenges, and perspectives, especially in the context of no such existing review for ground- and aerial- based estimation. This paper provides the current knowledge mainly concerning passive image-based methods and active light detection and ranging (LiDAR) -based methods. We first harmonized the definitions of fCover and its related quantities (e.g., effective canopy cover, crown cover, stratified vegetation cover, and canopy fraction). Secondly, the typical applications of fCover and related quantities over a range of scales, fields, and ecosystems were summarized. Thirdly yet importantly, we offered a comprehensive review of traditional non-imaging methods, image-based methods (e.g., segmentation, unmixing, and spectral retrieval), point cloud-based methods (e.g., rasterization), and LiDAR return-based methods (e.g., return number index and return intensity retrieval) across different platforms (i.e., ground, unmanned aerial vehicle (UAV) and airplane). Our investigation of fCover and related quantities estimation touches upon various vegetation ecosystems, including agriculture cropland, grassland, wetland, and forest. Finally, the current challenges and future directions were discussed, such as image signal processing under complex heterogeneous surfaces and stratified cover and non-photosynthesis cover retrieval. We, therefore, expect that this review may offer an insight into fCover and related quantities estimation and serve as a reference for remote sensing scientists, agronomists, silviculturists, and ecologists. [ABSTRACT FROM AUTHOR]

Precise structural information collected from plots is significant in the management of and decision-making regarding forest resources. Currently, laser scanning is widely used in forestry inventories to acquire three-dimensional (3D) structural information. There are three main data-acquisition modes in ground-based forest measurements: single-scan terrestrial laser scanning (TLS), multi-scan TLS and multi-single-scan TLS. Nevertheless, each of these modes causes specific difficulties for forest measurements. Due to occlusion effects, the single-scan TLS mode provides scans for only one side of the tree. The multi-scan TLS mode overcomes occlusion problems, however, at the cost of longer acquisition times, more human labor and more effort in data preprocessing. The multi-single-scan TLS mode decreases the workload and occlusion effects but lacks the complete 3D reconstruction of forests. These problems in TLS methods are largely avoided with mobile laser scanning (MLS); however, the geometrical peculiarity of forests (e.g., similarity between tree shapes, placements, and occlusion) complicates the motion estimation and reduces mapping accuracy. Therefore, this paper proposes a novel method combining single-scan TLS and MLS for forest 3D data acquisition. We use single-scan TLS data as a reference, onto which we register MLS point clouds, so they fill in the omission of the single-scan TLS data. To register MLS point clouds on the reference, we extract virtual feature points that are sampling the centerlines of tree stems and propose a new optimization-based registration framework. In contrast to previous MLS-based studies, the proposed method sufficiently exploits the natural geometric characteristics of trees. We demonstrate the effectiveness, robustness, and accuracy of the proposed method on three datasets, from which we extract structural information. The experimental results show that the omission of tree stem data caused by one scan can be compensated for by the MLS data, and the time of the field measurement is much less than that of the multi-scan TLS mode. In addition, single-scan TLS data provide strong global constraints for MLS-based forest mapping, which allows low mapping errors to be achieved, e.g., less than 2.0 cm mean errors in both the horizontal and vertical directions. [ABSTRACT FROM AUTHOR]

Ground filtering is an essential procedure in almost all LiDAR applications. However, most existing ground filtering algorithms require different amounts of user input to manually set up initial parameters, such as terrain relief amplitude and average slope, which is subjective, time consuming, and prone to errors. Here, we propose a simple terrain relief index derived from raw airborne LiDAR data to automatically tune the slope-related parameters of ground filtering algorithms. The terrain relief index is a ratio between the height difference of the entire point cloud and the maximum above ground level of non-ground points. The latter variable can be estimated with the maximum local height difference of raw LiDAR data through gridding. We validated our method using the benchmark airborne LiDAR datasets provided by the International Society for Photogrammetry and Remote Sensing. The results showed a high correlation ( r  = 0.876) between the terrain relief index and the referential terrain relief amplitude. The degree of correlation was greater across larger areas ( r  = 0.926) than small areas ( r  = 0.861) regardless of the type of land cover (e.g., city or forest). The terrain relief index was introduced into two existing filtering algorithms: Cloth Simulation Filtering (CSF) and Progressive Morphological (PM) Filter, by relating the terrain relief index to the cloth rigidness of the CSF and the slope threshold of the PM filter. To compare the results, the two algorithms were implemented both with manually tuned parameters and with the parameters derived from the terrain relief index. The results showed that there was only a slight discrepancy in average Total Error (0.1%) between them in the CSF, which means that the terrain relief index can automatically determine the cloth rigidness without noticeable loss of accuracy. The average difference between the slope threshold provided by the terrain relief index and the manually tuned optimal slope threshold was 0.142 rad (8.136°) for the PM filter, which is acceptable relative to manually parameter setting without any prior knowledge. The terrain relief index can estimate the terrain relief amplitude from raw airborne LiDAR data, and the parameter settings suggested in this paper for the filtering algorithm can improve automation. [ABSTRACT FROM AUTHOR]

Terrestrial Laser Scanning (TLS) plays an increasing role in acquiring 3-dimensional forest structure information. Obstructions and stem density often need multiple scans, making the registration procedure vitally important. Since natural features are difficult to find, traditional registration methods often use artificial reflectors as tie points in forest areas. However, the placement of reflectors reduces the scanning efficiency, especially in forest stands with severe obstructions. In this paper, an efficient registration method using a coarse-to-fine strategy is proposed to overcome the challenge of placing artificial targets so as to improve the scanning efficiency. The coarse registration step utilizes the backsighting orientation approach to form a coarse alignment. Unlike other backsighting research used in urban areas, we solely rely on a TLS system with an internal compass and a built-in inclination sensor. In the fine registration step, stem center locations are calculated in each individual scan. Then, corresponding stem center pairs are found between adjacent scans with the help of the coarse registration results. They are used as tie points to perform a rigid-body transformation for the fine registration. The proposed coarse-to-fine registration method was tested at two forest sites in northeast China. The registration accuracy is approximately 1.5 cm. Results also show that the diameters at breast height (DBHs) extracted from registered TLS data sets are highly correlated with field-measured DBHs (coefficient of determination (R 2 ): 0.92, root mean square error (RMSE): 0.27 cm). Considering both the scanning efficiency and accuracy, the proposed coarse-to-fine registration method provides a feasible and effective way for forest measurements. [ABSTRACT FROM AUTHOR]

Building roof extraction from airborne laser scanning point clouds is significant for building modeling. The common method adopts a bottom-up strategy which requires a ground filtering process first, and the subsequent process of region growing based on a single seed point easily causes oversegmentation problem. This paper proposes a novel method to extract roofs. A top-down strategy based on cloth simulation is first used to detect seed point sets with semantic information; then, the roof seed points are extracted instead of a single seed point for region-growing segmentation. The proposed method is validated by three point cloud datasets that contain different types of roof and building footprints. The results show that the top-down strategy directly extracts roof seed point sets, most roofs are extracted by the region-growing algorithm based on the seed point set, and the total errors of roof extraction in the test areas are 0.65%, 1.07%, and 1.45%. The proposed method simplifies the workflow of roof extraction, reduces oversegmentation, and determines roofs in advance based on the semantic seed point set, which suggests a practical solution for rapid roof extraction. • A top-down strategy is presented for extracting roofs from airborne LiDAR point clouds. • The proposed strategy avoids ground filtering and simplifies the workflow of roof extraction. • The cloth simulation algorithm detects seed points. • The combination of roughness and connect-component labeling determines roof seed sets. • The proposed seed point set-based region-growing method reduces oversegmentation. [ABSTRACT FROM AUTHOR]

Terrestrial LiDAR (TLS) instruments have great capability to describe canopy structure with unprecedented levels of detail in plot-scale forest measurement. However, in most cases, only parts of the trees within the sample plot are scanned due to occlusion effects from the other trees in the direction of the laser beam. These obstructions cause incomplete observation and missing features, resulting in the underestimation of tree attributes. Typical data acquisition with multi-scan mode seeks to mitigate occlusion effect and then provide almost full coverage of plot. The density of scan stations is determined by plot size, the density of plants and the metrics to be measured. Currently, the determination of density and locations of multiple scans depends on surveyor's experience and is lack of scientific protocols, generally, causing data redundancy and low efficiency of measurement, e.g. time cost in moving devices and scan registration. In fact, the occlusion effect primarily comes from the unknown complex spatial pattern of trees in natural forest conditions. UAVs are able to map the spatial locations of trees and are expected to provide basic knowledge for the optimization of TLS sampling pattern in forest conditions. The focus of this study is on strategies to derive multi-scan locations over forest plots. A novel chain-mode optimization of TLS sampling pattern was designed to maximize visibility of trees with minimum scans, hence improving the data quality and the efficiency of measurement. We proposed three basic optimization rules: (1) scan candidates prefer to locate on those positions undergoing low occlusion effect; (2) cumulative angular sampling (CAS) of each tree scanned from several directions satisfies the requirement user defined; (3) scan locations are uniformly distributed. In the implementation, 2D visibility analysis is firstly conducted for all the trees, simplified as circles in a plot, based on tree location map derived from UAV images. This step aims to find locally optimal scan locations following the first rule. Secondly, the CAS of each tree is geometrically computed. This step is devoted to select those trees requiring more scans to meet user level following the second rule. Thirdly, the former two steps are consecutively repeated in consideration of the third rule, only for those selected trees, until the CAS of each tree meets the user's requirements. Through two simulated forest plots where trees respectively distributed follow a spatial random pattern and a row-spaced pattern, the proposed chain-mode scans yielded comparable data quality with regular scans whereas the efficiency is improved by up to 30%. It is expected that this chain-mode optimization method can be applied in more forest experiments, especially in long-term TLS measurements. [ABSTRACT FROM AUTHOR]