Search

Aim: Canopy structural complexity, which describes the degree of heterogeneity in vegetation density, is strongly tied to a number of ecosystem functions, but the community and structural characteristics that give rise to variation in complexity at site to subcontinental scales are poorly defined. We investigated how woody plant taxonomic and phylogenetic diversity, maximum canopy height, and leaf area index (LAI) relate to canopy rugosity, a measure of canopy structural complexity that is correlated with primary production, light capture, and resource‐use efficiency. Location: Our analysis used 122 plots distributed across 10 ecologically and climatically variable forests spanning a > 1,500 km latitudinal gradient within the National Ecological Observatory Network (NEON) of the USA. Time period: 2016–2018. Taxa studied: Woody plants. Methods: We used univariate and multivariate modelling to examine relationships between canopy rugosity, and community and structural characteristics hypothesized to drive site and subcontinental variation in complexity. Results: Spatial variation in canopy rugosity within sites and across the subcontinent was strongly and positively related to maximum canopy height (r2 =.87 subcontinent‐wide), with the addition of species richness in a multivariate model resolving another 2% of the variation across the subcontinent. Individually, woody plant species richness and phylogenetic diversity (r2 =.17 to.44, respectively) and LAI (r2 =.16) were weakly to moderately correlated with canopy rugosity at the subcontinental scale, and inconsistently explained spatial variation in canopy rugosity within sites. Main conclusions: We conclude that maximum canopy height is a substantially stronger predictor of complexity than diversity or LAI within and across forests of eastern North America, suggesting that canopy volume places a primary constraint on the development of structural complexity. Management and land‐use practices that encourage and sustain tall temperate forest canopies may support greater complexity and associated increases in ecosystem functioning. [ABSTRACT FROM AUTHOR]

Vegetation canopy structure is a fundamental characteristic of terrestrial ecosystems that defines vegetation types and drives ecosystem functioning. We use the multivariate structural trait composition of vegetation canopies to classify ecosystems within a global canopy structure spectrum. Across the temperate forest sub‐set of this spectrum, we assess gradients in canopy structural traits, characterise canopy structural types (CST) and evaluate drivers and functional consequences of canopy structural variation. We derive CSTs from multivariate canopy structure data, illustrating variation along three primary structural axes and resolution into six largely distinct and functionally relevant CSTs. Our results illustrate that within‐ecosystem successional processes and disturbance legacies can produce variation in canopy structure similar to that associated with sub‐continental variation in forest types and eco‐climatic zones. The potential to classify ecosystems into CSTs based on suites of structural traits represents an important advance in understanding and modelling structure–function relationships in vegetated ecosystems. [ABSTRACT FROM AUTHOR]

Since biodiversity often increases ecosystem functioning, changes in tree species diversity could substantially influence terrestrial carbon cycling. Yet much less is known about the relationships between forest structural diversity (i.e., the number and physical arrangement of vegetation elements in a forest) and carbon cycling, and the factors that mediate these relationships. We capitalize on spaceborne lidar data from NASA's Global Ecosystem Dynamics Investigation (GEDI) and on-the-ground forest inventory and analysis (FIA) data from 1796 plots across the contiguous United States to assess relationships among the structural and species diversity of live trees and aboveground carbon storage. We found that carbon storage was more strongly correlated with structural diversity than with species diversity, for both forest inventory-based metrics of structural diversity (e.g., height and DBH diversity) and GEDI-based canopy metrics (i.e., foliage height diversity (FHD)). However, the strength of diversity‑carbon storage relationships was mediated by forest origin and forest types. For both plot-based and GEDI-based metrics, the relationship between structural diversity (i.e., height diversity, DBH diversity, and FHD) and carbon storage was positive in natural forests for all forest types (broadleaf, mixed, conifer). For planted forests, structural diversity showed positive relationships in planted conifer forests but not in planted mixed forests. Species diversity did not show strong associations with carbon storage in natural forests but showed a positive relationship in mixed coniferous-broadleaf planted forests. Although plot-based structural diversity metrics refine our understanding of drivers of forest carbon balances at the plot scale, remotely sensed metrics such as those from GEDI can help extend that understanding to regional/national scales in a spatially continuous manner. Carbon storage showed stronger associations with plot-based structural diversity than with stand age, soil variables, or climate variables. Incorporating structural diversity into management and restoration strategies could help guide efforts to increase carbon storage and mitigate climate change as nature-based solutions. • Structural explained carbon storage better than did species diversity. • Structural diversity outperformed stand age, soil, and climate variables. • Influences of diversity on carbon storage vary across natural and planted forests. • Plot-based structural diversity showed stronger correlations than GEDI-based metrics. • GEDI-based metrics of forest structure will help enable large scale carbon mapping. [ABSTRACT FROM AUTHOR]

• Structural and composition change following stem-girdling varied by disturbance severity. • Removal of large trees affected soil temperature, soil water content, and canopy light absorption. • Removal of small to medium trees primarily affected only soil temperature. Forest structural diversity and community composition are key in regulating forest microclimates. When disturbance affects structural diversity or composition, forest microclimates may be altered due to changes in soil temperature, soil water content, and light availability. It is unclear however which structural or compositional components, when changed or to what extent, result in microclimatic change. To address this question, we used data from a large scale, manipulative stem-girdling experiment in northern, lower Michigan—the Forest Resilience and Threshold Experiment (FoRTE). FoRTE follows a factorial design with multiple levels of disturbance severity (0, 45, 65, 85%) based on targeted reductions in gross leaf area index via stem-girdling induced mortality. These disturbance severity treatments are applied in two ways: either as top-down (largest trees are killed) or bottom-up (small to medium trees killed) treatments. We examined how multiple components of structural diversity and community composition changed as a product of disturbance severity and type, and then tested for resulting effects on forest microclimates (light availability, soil temperature, and soil water), using a multivariate, Random Forest framework. We found that measures of community composition (species richness, species evenness, and Shannon-Wiener Diversity Index) and stand structure (basal area, standard deviation of DBH, tree size diversity) declined more following disturbance than did measures of canopy cover, heterogeneity, arrangement, or height. However, when changes in each variable from pre- to post-disturbance, measured as log change, were employed in a multivariate, Random Forest regression framework, structural diversity measures of heterogeneity (rugosity, top rugosity), cover (canopy cover), and arrangement (porosity) were the most influential variables, but with differences among bottom-up and top-down treatments We found that the death of large trees from disturbance impacts soil temperature, water, and light environments more substantially and uniformly across disturbance gradients than does the death of smaller trees. Our results have implications for both statistical and process-based modeling of forest disturbance. [ABSTRACT FROM AUTHOR]

Highlights • Landsat greenness and brightness were correlated with canopy structure complexity. • NDVI could estimate six metrics of structural complexity from terrestrial LiDAR. • This improves the spatial understanding of 3D forest structure in Landsat metrics. • Coupling LiDAR and Landsat could lead to improved ecosystem function predictions. Abstract Vegetation metrics derived from satellite imagery provide continuous and large spatial-scale measurements that are critical for interpreting and predicting ecosystem function. However, uncertainty still remains as to the precise structural information that could be estimated from these metrics. Landsat-derived metrics provide pixel measurements of vegetation across the landscape, whereas Light Detection and Ranging (LiDAR) provides multidimensional data on the vertical arrangement of forests. Terrestrial LiDAR metrics of structural complexity describe the arrangement of vegetation in the canopy, and could be coupled with Landsat-derived metrics through their influence on energy and light. Linking Landsat to terrestrial LiDAR estimates of canopy structure could expand the interpretation of Landsat-derived metrics and broaden the spatial scale at which structural complexity can be evaluated. Here, we examined associations between Landsat-derived metrics and terrestrial LiDAR measurements of structural complexity. Structural complexity measurements were obtained with terrestrial LiDAR from plots within eight forested NEON sites across eastern North America. Vegetation metrics (NDVI, EVI, tasseled cap metrics) were calculated for corresponding locations from Landsat 8 satellite imagery. Results showed that canopy reflectance, greenness and brightness, were linked with several measures of canopy structure. Higher levels of greenness were associated with stands having a taller canopy, greater leaf area density and variability, and a less open and porous canopy. Among greenness metrics, NDVI was most strongly correlated with structural complexity metrics (adj. R2 = 0.52 – 0.62 for six metrics). Additionally, we found that a brighter canopy was associated with greater leaf area density and variability, canopy cover, porosity, and lower leaf clumping. Our results demonstrated the potential for large-spatial extent estimates of structural complexity using satellite imagery, and may lead to improved predictions of forest ecosystem functioning such as those predicted in “big leaf” ecosystem models. [ABSTRACT FROM AUTHOR]

Moderate severity disturbances, those that do not result in stand replacement, play an essential role in ecosystem dynamics. Despite the prevalence of moderate severity disturbances and the significant impacts they impose on forest functioning, little is known about their effects on forest canopy structure and how these effects differ over time across a range of disturbance severities and disturbance types.Using longitudinal data from the National Ecological Observatory Network project, we assessed the effects of three moderate severity press disturbances (beech bark disease, hemlock woolly adelgid and emerald ash borer, which are characterized by continuous disturbance and sustained mortality) and three moderate severity pulse disturbances (spring cankerworm moth, spongy moth and ground fire, which are associated with discrete and relatively short mortalities) on temperate forest canopy structure in eastern US. We studied (1) how light detection and ranging (LiDAR)‐derived metrics of canopy structure change in response to disturbance and (2) whether initial canopy complexity offsets impact of disturbances on canopy structure over time. We used a mixed‐effects modelling framework which included a non‐linear term for time to represent changes in canopy structure caused by disturbance, and interactions between time and both disturbance intensity and initial canopy complexity.We discovered that high intensity of both press and pulse disturbances inhibited canopy height growth while low intensity pulse disturbances facilitated it. In addition, high intensity pulse disturbances facilitated increases in the complexity of the canopy over time. Concerning the impact of initial canopy complexity, we found that the initial canopy complexity of disturbed plots altered the effects of moderate disturbances, indicating potential resilience effects.Synthesis. This study used repeated measurements of LiDAR data to examine the effects of moderate disturbances on various dimensions of forest canopy structure, including height, openness, density and complexity. Our study indicates that both press and pulse disturbances can inhibit canopy height growth over time. However, while the impact of press disturbances on other dimensions of canopy structure could not be clearly detected, likely because of compensatory growth, the impact of pulse disturbances over time was more readily apparent using multi‐temporal LiDAR data. Furthermore, our findings suggest that canopy complexity might help to mitigate the impact of moderate disturbances on canopy structures over time. Overall, our research highlights the usefulness of multi‐temporal LiDAR data for assessing the structural changes in forest canopies caused by moderate severity disturbances. [ABSTRACT FROM AUTHOR]

This article is a Commentary on Smith et al., 222: 1284–1297. [ABSTRACT FROM AUTHOR]

Airborne Laser Scanners (ALS) and Terrestrial Laser Scanners (TLS) are two lidar systems frequently used for remote sensing forested ecosystems. The aim of this study was to compare crown metrics derived from TLS, ALS, and a combination of both for describing the crown structure and fuel attributes of longleaf pine (Pinus palustris Mill.) dominated forest located at Eglin Air Force Base (AFB), Florida, USA. The study landscape was characterized by an ALS and TLS data collection along with field measurements within three large (1963 m2 each) plots in total, each one representing a distinct stand condition at Eglin AFB. Tree-level measurements included bole diameter at breast height (DBH), total height (HT), crown base height (CBH), and crown width (CW). In addition, the crown structure and fuel metrics foliage biomass (FB), stem branches biomass (SB), crown biomass (CB), and crown bulk density (CBD) were calculated using allometric equations. Canopy Height Models (CHM) were created from ALS and TLS point clouds separately and by combining them (ALS + TLS). Individual trees were extracted, and crown-level metrics were computed from the three lidar-derived datasets and used to train random forest (RF) models. The results of the individual tree detection showed successful estimation of tree count from all lidar-derived datasets, with marginal errors ranging from −4 to 3%. For all three lidar-derived datasets, the RF models accurately predicted all tree-level attributes. Overall, we found strong positive correlations between model predictions and observed values (R2 between 0.80 and 0.98), low to moderate errors (RMSE% between 4.56 and 50.99%), and low biases (between 0.03% and −2.86%). The highest R2 using ALS data was achieved predicting CBH (R2 = 0.98), while for TLS and ALS + TLS, the highest R2 was observed predicting HT, CW, and CBD (R2 = 0.94) and HT (R2 = 0.98), respectively. Relative RMSE was lowest for HT using three lidar datasets (ALS = 4.83%, TLS = 7.22%, and ALS + TLS = 4.56%). All models and datasets had similar accuracies in terms of bias (<2.0%), except for CB in ALS (−2.53%) and ALS + TLS (−2.86%), and SB in ALS + TLS data (−2.22%). These results demonstrate the usefulness of all three lidar-related methodologies and lidar modeling overall, along with lidar applicability in the estimation of crown structure and fuel attributes of longleaf pine forest ecosystems. Given that TLS measurements are less practical and more expensive, our comparison suggests that ALS measurements are still reasonable for many applications, and its usefulness is justified. This novel tree-level analysis and its respective results contribute to lidar-based planning of forest structure and fuel management. [ABSTRACT FROM AUTHOR]

Structural diversity is a key feature of forest ecosystems that influences ecosystem functions from local to macroscales. The ability to measure structural diversity in forests with varying ecological composition and management history can improve the understanding of linkages between forest structure and ecosystem functioning. Terrestrial LiDAR has often been used to provide a detailed characterization of structural diversity at local scales, but it is largely unknown whether these same structural features are detectable using aerial LiDAR data that are available across larger spatial scales. We used univariate and multivariate analyses to quantify cross-compatibility of structural diversity metrics from terrestrial versus aerial LiDAR in seven National Ecological Observatory Network sites across the eastern USA. We found strong univariate agreement between terrestrial and aerial LiDAR metrics of canopy height, openness, internal heterogeneity, and leaf area, but found marginal agreement between metrics that described heterogeneity of the outermost layer of the canopy. Terrestrial and aerial LiDAR both demonstrated the ability to distinguish forest sites from structural diversity metrics in multivariate space, but terrestrial LiDAR was able to resolve finer-scale detail within sites. Our findings indicated that aerial LiDAR could be of use in quantifying broad-scale variation in structural diversity across macroscales. [ABSTRACT FROM AUTHOR]