Search

The High-Luminosity Large Hadron Collider (HL-LHC) project aims to improve the performance of the LHC by increasing the proton–proton collision luminosity. New physics discoveries will be possible starting in 2027. The HL-LHC aims to improve the integrated luminosity by a factor of 10 concerning the current running LHC's design value. The HL-LHC project foresees delivering proton–proton collisions at 14 TeV CM (Center of Mass) energy providing the integrated luminosity to a value of 3 ab−1 for the ATLAS and CMS experiments, 50 fb−1 for LHCb, and 5 fb−1 for ALICE. The increased integrated luminosity for the above LHC experiments will provide the potential to discover rare processes while improving these measurements' signal-to-noise (S/N) ratio statistics. The ATLAS muon spectrometer has been upgraded to face the challenges of the luminosity at the HL-LHC run. The new sub-detectors are as follows: The New Small Wheel (NSW) has replaced the Cathode Strip Chambers (CSC) discs at the internal part of the ATLAS end cups. The new integrated small Monitored Drift Chambers (sMDT) with the Resistive Plate Chambers (RPC) are installed at the outer end of the ATLAS BI (Barrel Inner) layer, in the barrel–endcap transition region, at 1.0 < |η| < 1.3, where η is the pseudo-rapidity (pseudo-rapidity η is a commonly used spatial coordinate describing the angle of a particle relative to the beam axis, defined as η = − l n t a n θ 2 , where θ is the angle between the vector momentum p → and the positive direction of the beam axis). The NSW is an innovative technological achievement, including the MicroMegas (MM) gas detectors in large areas and small-strip Thin Gap Chambers (sTGC), enabling high pT (high pT is the high value of the particles' transverse momentum versus the beam collision axis) trigger and muon detection. The muon reconstruction, the background rate, other spectrometer parameters, and the NSW performance are also presented. [ABSTRACT FROM AUTHOR]