Search

Battery electric vehicles (BEVs) are being considered as a replacement technology for diesel vehicles in underground mining of mineral resources. However, many issues related to BEVs in industrial applications still require more detailed research. One significant topic is the heat load—BEVs' heat emission into the working environment during regular operation. This paper provides an overview of the thermal behavior of NMC and LFP Li-ion cells tested under various conditions, which is an important step in determining the overall heat load of BEVs. The surface temperature of three NMC and one LFP 18650 Li-ion cells was monitored during charging and discharging at four different rates, at constant ambient temperatures of 30 °C and 40 °C. The main results pertain to the cell's thermal behavior during charging and discharging, highlighting the distinctive temperature profiles of NMC and LFP cells.

This paper provides a comprehensive exploration of float current analysis in lithium-ion batteries, a promising new testing method to assess calendar aging. Float currents are defined as the steady-state trickle charge current after a transient part. In the literature, a correlation to capacity loss was reported. Assuming the float current compensates for the voltage decay over time and is linked to calendar aging, effects from voltage slippery must be considered. The dU/dQ analysis suggests solely a loss of active lithium. Therefore, we investigate the solid electrolyte interphase (SEI) growth as the general aging mechanism to explain the origin of float currents. Our results show that the voltage slippery theory holds true within the low to middle test voltage ranges. However, the theory's explanatory power begins to diminish at higher voltage ranges, suggesting the existence of additional, yet unidentified, factors influencing the float current. A shuttle reaction or lithiation of the cathode by electrolyte decomposition are the most promising alternative aging mechanisms at high voltages. The paper proposes a unique voltage slippery model to check for correlations between aging mechanisms, the float current test and the check-up test. For a better understanding, test strategies are proposed to verify/falsify the aging mechanisms beyond SEI. [ABSTRACT FROM AUTHOR]

Self-discharge of lithium-ion cells leads to voltage decay over time. In this work, the self-discharge was measured at 30 °C for three cell types at various voltage levels for about 150 days in a constant voltage mode determining the current at a high precision (float current). All cells exhibit a transient part leading to a steady-state, which is no longer influenced by reversible effects. To study the effect of the check-ups on the steady-state float current, the cells, interrupted and not interrupted by check-ups, were compared. The results indicate that both the transient processes and steady-state currents are highly reproducible. In the first period of the float current, the polarization dominates the measured current, followed by the anode overhang effect dominating the process for a period of 5–30 days. After the decline of both processes, a mostly constant steady-state in the order of µA is observed. The check-up interruption generally shows no apparent effect on the reached steady-state and results only in an extended settling time. A model to simulate the transient process and steady-state of float currents was developed. The model shows a high accuracy in reproducing the results and identifying the time needed to reach the steady-state. [ABSTRACT FROM AUTHOR]

This paper provides a comprehensive exploration of float current analysis in lithium-ion batteries, a promising new testing method to assess calendar aging. Float currents are defined as the steady-state trickle charge current after a transient part. In the literature, a correlation to capacity loss was reported. Assuming the float current compensates for the voltage decay over time and is linked to calendar aging, effects from voltage slippery must be considered. The dU/dQ analysis suggests solely a loss of active lithium. Therefore, we investigate the solid electrolyte interphase (SEI) growth as the general aging mechanism to explain the origin of float currents. Our results show that the voltage slippery theory holds true within the low to middle test voltage ranges. However, the theory’s explanatory power begins to diminish at higher voltage ranges, suggesting the existence of additional, yet unidentified, factors influencing the float current. A shuttle reaction or lithiation of the cathode by electrolyte decomposition are the most promising alternative aging mechanisms at high voltages. The paper proposes a unique voltage slippery model to check for correlations between aging mechanisms, the float current test and the check-up test. For a better understanding, test strategies are proposed to verify/falsify the aging mechanisms beyond SEI.

Silicon has become an integral negative electrode component for lithium-ion batteries in numerous applications including electric vehicles and renewable energy sources. However, its high capacity and low cycling stability represent a significant trade-off that limits its widespread implementation in high fractions in the negative electrode. Herein, we assembled high-capacity (1.8 Ah) cells using a nanoparticulate silicon–graphite (1:7.1) blend as the negative electrode material and a LiFePO4–LiNi0.5Mn0.3Co0.2O2 (1:1) blend as the positive electrode. Two types of cells were constructed: cylindrical 18650 and pouch cells. These cells were subjected both to calendar and cycling aging, the latter exploring different working voltage windows (2.5–3.6 V, 3.6–4.5 V, and 2.5–4.5 V). In addition, one cell was opened and characterised at its end of life by means of X-ray diffraction, scanning electron microscopy, and further electrochemical tests of the aged electrodes. Si degradation was identified as the primary cause of capacity fade of the cells. This work highlights the need to develop novel strategies to mitigate the issues associated with the excessive volumetric changes of Si. [ABSTRACT FROM AUTHOR]

Self-discharge of lithium-ion cells leads to voltage decay over time. In this work, the self-discharge was measured at 30 ∘C for three cell types at various voltage levels for about 150 days in a constant voltage mode determining the current at a high precision (float current). All cells exhibit a transient part leading to a steady-state, which is no longer influenced by reversible effects. To study the effect of the check-ups on the steady-state float current, the cells, interrupted and not interrupted by check-ups, were compared. The results indicate that both the transient processes and steady-state currents are highly reproducible. In the first period of the float current, the polarization dominates the measured current, followed by the anode overhang effect dominating the process for a period of 5–30 days. After the decline of both processes, a mostly constant steady-state in the order of μA is observed. The check-up interruption generally shows no apparent effect on the reached steady-state and results only in an extended settling time. A model to simulate the transient process and steady-state of float currents was developed. The model shows a high accuracy in reproducing the results and identifying the time needed to reach the steady-state.

Lithium-ion (Li-ion) batteries are an important component of energy storage systems used in various applications such as electric vehicles and portable electronics. There are many chemistries of Li-ion battery, but LFP, NMC, LMO, and NCA are four commonly used types. In order for the battery applications to operate safely and effectively, battery modeling is very important. The equivalent circuit model (ECM) is a battery model often used in the battery management system (BMS) to monitor and control Li-ion batteries. In this study, experiments were performed to investigate the performance of three different ECMs (1RC, 2RC, and 1RC with hysteresis) on four Li-ion battery chemistries (LFP, NMC, LMO, and NCA). The results indicated that all three models are usable for the four types of Li-ion chemistries, with low errors. It was also found that the ECMs tend to perform better in dynamic current profiles compared to non-dynamic ones. Overall, the best-performed model for LFP and NCA was the 1RC with hysteresis ECM, while the most suited model for NMC and LMO was the 1RC ECM. The results from this study showed that different ECMs would be suited for different Li-ion battery chemistries, which should be an important factor to be considered in real-world battery and BMS applications. [ABSTRACT FROM AUTHOR]

Silicon has become an integral negative electrode component for lithium-ion batteries in numerous applications including electric vehicles and renewable energy sources. However, its high capacity and low cycling stability represent a significant trade-off that limits its widespread implementation in high fractions in the negative electrode. Herein, we assembled high-capacity (1.8 Ah) cells using a nanoparticulate silicon–graphite (1:7.1) blend as the negative electrode material and a LiFePO4–LiNi0.5Mn0.3Co0.2O2 (1:1) blend as the positive electrode. Two types of cells were constructed: cylindrical 18650 and pouch cells. These cells were subjected both to calendar and cycling aging, the latter exploring different working voltage windows (2.5–3.6 V, 3.6–4.5 V, and 2.5–4.5 V). In addition, one cell was opened and characterised at its end of life by means of X-ray diffraction, scanning electron microscopy, and further electrochemical tests of the aged electrodes. Si degradation was identified as the primary cause of capacity fade of the cells. This work highlights the need to develop novel strategies to mitigate the issues associated with the excessive volumetric changes of Si.

Analysis of the state and trends of the world market of lithium-ion batteries (LIB) is carried out, and the main development trends are identified. Until recently, the growth basis of the global LIB market was built on requests related to portable electronics, but the saturation of this market and the formation of new needs in the emerging areas of the automotive industry, industrial generation, and network power distribution have changed the development vector of the entire industry. New needs have made adjustments to key requirements for battery systems and determined new technological barriers. The present work describes and classifies the main LIB electrode components as well as their applicability depending on the field of use of the final product. The state of the Russian market of both final products and main electrode materials is considered. Despite optimistic forecasts for the development of the LIB market in Russia and the expected significant economic effect, the current level of competences, technologies, and production volumes in the Russian Federation does not meet the needs of modern and future markets. In 2017, LIB import to Russia amounted to $85.1 million USD with an annual consumption growth rate of approximately 15–25%. The structure of the battery import is dominated by batteries for consumer electronics. The share of domestic manufacturers in the civil sector is less than 3%, and domestic manufacturers are mainly represented in the special equipment sector. The work presents a list of the main manufacturers of lithium-ion batteries dominating the Russian market. The tendencies to reduce the cost of existing solutions and the possibility of switching to alternative lithium-free metal-ion batteries are considered. [ABSTRACT FROM AUTHOR]

The non-uniform surface temperature distribution of a battery cell results from complex reactions inside the cell and makes efficient thermal management a challenging task. This experimental work attempts to determine the evolution of surface temperature distribution of three pouch type commercial cells: Nickel Manganese Cobalt oxide (NMC)-based 20 Ah cell, Lithium Iron Phosphate (LFP) 14 Ah, and Lithium Titanate Oxide (LTO) 5 Ah battery cell by using contact thermistor and infrared (IR) thermography. High current (up to 100 A) continuous charge/discharge and high current (80 A) micro pulse cycling profile were applied on the cells. It was found that thermistor based temperature profile varied cell to cell, especially the LTO cell. Among the investigated cells, the NMC cell shows highest temperature rise and the LTO cell the lowest rise. IR (Infrared) images revealed the spatial distribution of surface temperature, in particular the location of the hottest region varies depending not only on the geometrical and material properties of the cell, but also the type of loads applied on the cells. Finally, a modeling perspective of the cell temperature non-uniformity is also discussed.

The growing need for accurate estimation of by fitting battery's thermal and electrical performances at different operating conditions is crucial in its applications especially in electrified vehicles. This paper presents an effective method for developing a thermal and electrical modeling methodology for calculation thermal behavior of a lithium-ion cell and the voltage response under a current solicitation. The model was elaborated on three pouch cells with different battery chemistries for use in electrical vehicles/hybrid electrical vehicles, namely lithium iron phosphate, lithium nickel manganese cobalt oxide, and lithium titanium oxide (LTO). The model, implemented in a MATLAB/Simulink interface, uses an equivalent circuit and heat-generation equations coupled a thermal model. The three cell chemistries have been investigated using test procedures and thermal images at room temperature. The results of this study show that a temperature distribution to be fairly uniform after a complete discharge for the three chemistries with the lowest temperature gradient found for the LTO-based cell. Finally, comparison between simulation results and measured data under dynamic profiles shows a good correspondence with the measurements of the validation tests with errors lying between ±4% and 2 °C for the electrical and thermal model, respectively. [ABSTRACT FROM AUTHOR]

The non-uniform surface temperature distribution of a battery cell results from complex reactions inside the cell and makes efficient thermal management a challenging task. This experimental work attempts to determine the evolution of surface temperature distribution of three pouch type commercial cells: Nickel Manganese Cobalt oxide (NMC)-based 20 Ah cell, Lithium Iron Phosphate (LFP) 14 Ah, and Lithium Titanate Oxide (LTO) 5 Ah battery cell by using contact thermistor and infrared (IR) thermography. High current (up to 100 A) continuous charge/discharge and high current (80 A) micro pulse cycling profile were applied on the cells. It was found that thermistor based temperature profile varied cell to cell, especially the LTO cell. Among the investigated cells, the NMC cell shows highest temperature rise and the LTO cell the lowest rise. IR (Infrared) images revealed the spatial distribution of surface temperature, in particular the location of the hottest region varies depending not only on the geometrical and material properties of the cell, but also the type of loads applied on the cells. Finally, a modeling perspective of the cell temperature non-uniformity is also discussed. [ABSTRACT FROM AUTHOR]