Search

Background. The aim of this study was to investigate the effect of preheating methacrylate- and silorane-based composite resins on their color stability up to 40 times at 55‒60°C. Methods. Seventy-six methacrylate and silorane-based composite resin samples, with a diameter of 10 mm and a height of 2 mm, were divided into 4 groups (n=19). After the samples were prepared, their color parameters were determined using a reflective spectrophotometer. The composite resin samples were separately stored in a solution of tea for 40 consecutive days. Then the samples underwent a color determination procedure again using a spectrophotometer and color changes were recorded. Finally two-way ANOVA was used to study the effect of composite temperature on its staining (P

Background and aims. The aim of the present study was to compare the effect ofsurface treatment with Er; Cr:YSSG, Nd:YAG, and CO2 lasers on repair shear bond strength of a silorane-based composite resin. Materials and methods. Sixty eight cylindrical samples of a silorane-based composite resin (Filtek Silorane) were pre-pared and randomly divided into 4 groups as follows: group 1: without surface treatment; groups 2, 3 and 4 with surface treatments using Er; Cr:YSSG, Nd:YAG, and CO2lasers, respectively. A positive control group (group 5) was assigned in order to measure cohesive strength. Repair shear bond strength values were measured and data was analyzed using one-way ANOVA and a post hoc Tukey test at a significance level of α=0.05. Results. There were statistically significant differences in repair shear bond strength values between group 2 and other groups (P, Journal of Dental Research, Dental Clinics, Dental Prospects; ISSN 2008-2118

Background and aims. The aim was to evaluate the effect of three methods of fiber insertion on fracture resistance of root-filled maxillary premolars in vitro. Materials and methods. Sixty extracted human maxillary premolars received endodontic treatment followed by preparation of mesioocclusodistal (MOD) cavities, with gingival cavosurface margin 1.5 mm coronal to the cementoenamel junction (CEJ). Subsequently, the samples were randomly divided into four groups: no-fiber group; occlusal fiber group (fiber was placed in the occlusal third); circumferential fiber group (fiber was placed circumferentially in the cervical third); and dual-fiber group (occlusal and circumferential fibers). Subsequent to restoring with composite resin and thermocycling, a compressive force was applied until fracture. Data was analyzed using one-way ANOVA and Tukey test at significance levels of P < 0.05 and P < 0.02, respectively. Results. Fiber placement significantly increased fracture resistance. Fracture resistance in the dual-fiber group was significantly higher than that in the circumferential fiber group (P < 0.007); however, there were no significant differences between the dual-fiber and occlusal fiber groups (P = 0.706). The highest favorable fracture rate was observed in the circumferential fiber group (60%). Conclusion. Composite resin restoration along with glass fiber in the occlusal and gingival thirds can be an acceptable treatment option for restoring root-filled upper premolars.

Background and aims. Retreatment of existing restorations not only requires a lot of money and time but also there is a danger of weakening tooth structure and irritating the pulp. Since awareness of the reasons for the retreatment of teeth will save the teeth from possible future failure, the aim of this study was to assess the reasons for retreatment of amalgam and composite restorations in patients referring to Tabriz Faculty of Dentistry. Materials and methods. In this descriptive study, the subjects had previously received an amalgam or a composite restoration in the Operative Department by dental students and were judged to need retreatment in their second visit. A total of 300 defective teeth were selected by simple random sampling method. The data was collected through examination and questionnaires and analyzed using chi-square test. Results. There was a statistically significant association between the type of the restorative material and the reason for retreatment (p=0.001). Conclusion. Although the reasons for the retreatment of amalgam and composite restorations were different, recurrent caries was the main reason for the retreatment for both restorative materials., Journal of Dental Research, Dental Clinics, Dental Prospects; ISSN 2008-210X

Background and aims. Dental handpiece is a source of contamination because it is in constant touch with the oral cavity. Sterilization does not seem to be sufficient to prevent penetration of microorganisms into air and water lines of the unit, because negative pressure developed by valves (which are placed in water outlets) and post shut-off inertial rotation of handpiece result in water and debris being sucked into air and water outlets of dental unit. The aim of this study was to compare dental unit contamination following use of clean head system handpieces and conventional handpieces. Materials and methods. Twenty-two dental units in the Department of Pediatric Dentistry in Shahid Beheshti Faculty of Dentistry were used for the purpose of this study. A 1.5×108 cfu/mm3 concentration of Staphylococcus epidermis (SE) was used to contaminate the air and water outlets of dental units. Ten clean head system handpieces and 10 conventional handpieces were used for 30 seconds in the above-mentioned suspension. Microbial samples were collected from the air and water lines. Culturing and colony counting procedures were carried out. Data was analyzed by t-test; a value of p< 0.01 was considered significant. Results. Results demonstrated a significantly lower SE contamination in water outlets following the use of clean head system (p< 0.01). Conclusion. A lower tendency of clean head system handpieces to transmit SE compared to conventional system makes them a better choice for infection control., Journal of Dental Research, Dental Clinics, Dental Prospects; ISSN 2008-210X