Search

Laser megajoule (LMJ) is a laser facility being built by the French nuclear science directorate, Commissariat a l'Energie Atomique. This facility is a large flashlamp pumped laser (1.8-MJ optical output). The pulsed power conditioning system of LMJ is based on a modular design of 480 modules (400-MJ energy capacitor bank). A new capacitor bank module (CBM) for the LMJ power conditioning system has been developed by the Institute of High Current Electronics (IHCE, Tomsk) in collaboration with International Technologies for High Pulsed Power (France). Two such modules were produced and tested in IHCE. The main parts of the CBM are the following: high-voltage power supplies, command control system, air conditioning system, capacitor block, and cables delivering the energy to a load. The parameters of the module are the following: total rated capacitance of 2900 (+4%) muF, charging voltage up to 24 kV, peak current amplitude of 240 kA, peak stored energy up to 864 kJ, pulsewidth at 10% of peak power of 360 mus, dimensions of 2.3 times 1.5 times 2.5 m3, and weight of ~2500 kg. In nominal regime (24-kV charging voltage, 40-m length cables), the energy delivered to flashlamps in each channel is 74 kJ (86% efficiency). No failures were observed in more than 1000 test shots, and all parameters of the CBM are well within the requirements. Detailed description of the module design, performance, and test results are stated in this paper.

The GIT-32 is current generator developed by IHCE for Weizmann Institute of Science (Israel), devoted for experiments with current carrying pulsed plasma. Main parts of the generator are capacitor bank and multichannel multi-gap spark switch. Generator consists of four identical sections, connected in parallel to one load. Capacitor bank is assembled from 32 IEK-100-0.17 (0.17 muF, 40 nH, 100 kV) capacitors, connected in parallel. It stores ~ 20 kl at 85 kV charging voltage. Each two capacitors are commuted to a load by multi-gap spark switch, which is able to commute by 8 parallel channels. Inductance of the generator is ~ 10 nH, internal resistance ~ 0.005 Ohm. The GIT-32 generator was tested with 10, 15 and 20 nH inductive loads. At 10 nH load and 80 kV of charging voltage it provides 1 MA of current amplitude with 500 ns risetime with damping resistors in discharge circuit and 1.34 MA/570 ns without resistors. The generator operates reliably without any adjustments in 40divide80 kV range of charging voltage. The maximum jitter at 40 kV charging voltage is about 7 ns. The generator is quite compact: dimensions are 3300 x 3300 x 400 mm3 and total weight is about 2500 kg.

The GIT-32 current generator was developed for experiments with current carrying pulsed plasma. The main parts of the generator are capacitor bank, multichannel multigap spark switches, low inductive current driving lines, and central load part. The generator consists of four identical sections, connected in parallel to one load. The capacitor bank is assembled from 32 IEK-100-0.17 (0.17 microF, 40 nH, 100 kV) capacitors, connected in parallel. It stores approximately 18 kJ at 80 kV charging voltage. Each two capacitors are commuted to a load by a multigap spark switch with eight parallel channels. Switches operate in ambient air at atmospheric pressure. The GIT-32 generator was tested with 10, 15, and 20 nH inductive loads. At 10 nH load and 80 kV of charging voltage it provides 1 MA of current amplitude and 490 ns rise time with 0.8 Omega damping resistors in discharge circuit of each capacitor and 1.34 MA530 ns without resistors. The net generator inductance without a load was optimized to be as low as 12 nH, which results in extremely low self-impedance of the generator ( approximately 0.05 Omega). It ensures effective energy coupling with low impedance loads like Z pinch. The generator operates reliably without any adjustments in 40-80 kV range of charging voltage. Maximum jitter (relative to a triggering pulse) at 40 kV charging voltage is about 7 ns and lower at higher charging voltages. Operation and handling are very simple, because no oil and no purified gases are required for the generator. The GIT-32 generator has dimensions of 3200 x 3200 x 400 mm(3) and total weight of about 2500 kg, thus manifesting itself as a simple, robust, and cost effective apparatus.