Search

A monolithic CMOS compatible process has been developed to realize vertically integrated devices in silicon. The method involves the implantation of an oxygen into a patterned silicon substrate to form buried guiding structures. These buried devices are separated from a surface silicon layer by an intervening layer of silicon dioxide formed through the implantation process. Photolithography and etching is used to define devices on the surface silicon layer. The method has been utilized to realize the vertically coupled microdisk resonators and a variety of microresonator-based integrated optical elements. A new method for extraction of the unloaded Q of a cavity from its measured spectrum is also described.

A modified separation by implantation of oxygen process has been developed to sculpt vertically coupled microdisk resonators in silicon. The approach involves the implantation of oxygen ions into a silicon substrate, patterned with thermal oxide, to define waveguides on the bottom silicon layer, and photolithography and reactive ion etching to define the microdisk resonators on the top silicon layer. The top and the bottom silicon layers are separated by the oxide layer that was formed after the oxygen implantation. Fabricated microdisk resonators show resonances with a Q value of 10 300 and a free spectral range of 5.4nm.

Stimulated supercontinuum generation via coherent seeding is numerically demonstrated to produce continua of broader bandwidth and higher coherence than the conventional unseeded case. Implications for energy efficient generation of WDM channels are discussed.

A novel approach to three-dimensionally (3-D) integrate nanophotonic and electronic devices in silicon is described. The method is based on the SIMOX (Separation by Implantation of OXygen) process, to realize three-dimensionally (3-D) integrated devices in a monolithic fashion. In this approach, photonic and electronic devices are realized on vertically stacked layers of silicon, separated from each other by a dielectric layer of silicon dioxide formed through the process of oxygen implantation. Opto-electronic integration is demonstrated by realizing photonic circuits in a subterranean silicon layer and Metal-Oxide-Semiconductor (MOS) transistors on a surface layer of silicon. Optical and electronic functionalities are thus separated into two different layers of silicon, paving the way towards dense three-dimensional opto-electronic integration. This has the significant advantage that photonic devices do not consume any of the expensive silicon real estate required for CMOS circuitry. The versatility of the technique of SIMOX 3-D sculpting in obtaining complex optical circuitry is also demonstrated by synthesizing a cascaded microdisk structure that may be utilized to tailor the passband characteristics of optical filters.

The integration of photonics and electronics on a single silicon substrate requires technologies that can add optical functionalities without significantly sacrificing valuable wafer area. To this end, we have developed an innovative fabrication process, called SIMOX 3-D Sculpting, that enables monolithic optoelectronic integration in a manner that does not compromise the economics of CMOS manufacturing. In this technique, photonic devices are realized in subsurface silicon layers that are separated from the surface silicon layer by an intervening SiO2 layer. The surface silicon layer may then be utilized for electronic circuitry. SIMOX 3-D sculpting involves (1) the implantation of oxygen ions into a patterned silicon substrate followed by (2) high temperature anneal to create buried waveguide-based photonic devices. This process has produced subterranean microresonators with unloaded quality factors of 8000 and extinction ratios >20dB. On the surface silicon layers, MOS transistor structures have been fabricated. The small cross-sectional area of the waveguides lends itself to the realization of nonlinear optical devices. We have previously demonstrated spectral broadening and continuum generation in silicon waveguides utilizing Kerr optical nonlinearity. This may be combined with microresonator filters for on-chip supercontiuum generation and spectral carving. The monolithic integration of CMOS circuits and optical modulators with such multi-wavelength sources represent an exciting avenue for silicon photonics.

Three-dimensional optoelectronic integration can be achieved in SOI wafers using the process of SIMOX 3D sculpting. Micro-resonators, with unloaded Q of 8000 and extinction ratio >20 dB, were fabricated in a buried silicon layer and MOS transistor structures were fabricated on the surface silicon layer using a patterned SIMOX process.

Three-dimensionally integrated microdisk resonators have been employed to realize Vernier filters in Silicon. Cascaded configuration of vertically-coupled microdisk resonators with dissimilar radii increases the free spectral range of filters from 5.5 nm to 23 nm.

Monolithic integration of photonics and electronics has been achieved in silicon by vertically integrating metal-oxide-semiconductor field-effect transistors and waveguide-coupled microdisk resonators in a double-layer silicon-on-insulator wafer, thus paving the way towards dense three-dimensional optoelectronic integration.

This paper presents recent breakthroughs and applications of Raman based silicon photonics such as silicon Raman amplifiers and lasers. These lasers would extend the wavelength range of III-V laser to mid-IR where important applications such as laser medicine, biochemical sensing, and free space optical communication await the emergence of a practical and low cost laser.

A new process has been developed to create vertically-integrated photonic and optoelectronic circuits in silicon. The approach is the 3-D extension of the SIMOX process where buried SiO2 sections can be selectively created by using oxygen implantation, through a mask, followed by annealing. By controlling the implant energy, dose, mask area and thickness, arbitrary 3-D arrangements of Silicon/SiO2 can be created. The process has been used to create vertically coupled microdisk resonators and add-drop wavelength multiplexers on a silicon wafer.

This paper presents the design and operation of Si and GeSi Raman lasers and amplifiers. Different laser applications in various practical fields are also discussed.

Raman gain is a useful nonlinear phenomenon that has made optically pumped silicon lasers and amplifiers a reality. Unfortunately, the bandwidth of Raman gain in silicon is normally rather limited, owing to the narrow Raman linewidths typical of crystalline materials. Here, we report Raman amplification in silicon with a spectrum that is modified by the simultaneous occurrence of self-phase-modulation. This combined nonlinear action produces a broad Raman gain spectrum from a narrowband pump source.

Self-phase modulation is utilized to generate a continuum of wavelengths on a silicon chip. The propagation of near transform-limited, picosecond pulses (3ps) through a micron sized silicon waveguide results in the generation of a spectral continuum. This spectral continuum is then carved by microdisk resonators that are integrated three dimensionally on the same chip, resulting in multiple wavelength channels, with the farthest channel being around 3.1nm away from the center wavelength of the seed pulse. This technique can potentially enable wavelength division multiplexing at the chip level using a single off-chip laser.

Monolithic integration of photonics and electronics has been achieved in silicon by three-dimensionally integrating metal-oxide-semiconductor field-effect transistors and waveguide-coupled microdisk resonators. Implantation of oxygen ions into a silicon-on-insulator substrate with a patterned thermal oxide mask followed by a high temperature anneal was utilized to realize the buried photonic structures. This results in the formation of vertically stacked silicon layers separated from each other by an intervening oxide layer. Transistors are fabricated on the surface silicon by conventional processing techniques. Optical and electronic functionalities are thus separated into two different layers of silicon, paving the way toward dense three-dimensional optoelectronic integration.

We describe the first observation of spontaneous Raman emission, stimulated amplification, and lasing in a SiGe waveguide. A pulsed optical gain of 16dB and a lasing threshold of 25 W peak pulse power (20 mW average) is observed for a Si1-xGex waveguide with x=7.5%. At the same time, a 40 GHz frequency downshift is observed in the Raman spectrum compared to that of a silicon waveguide. The spectral shift can be attributed to the combination of composition- and strain-induced shift in the optical phonon frequency. The prospect of Germanium-Silicon-on-Oxide as a flexible Raman medium is discussed.