Search

CsPbBr3 nanoparticles uniformly distributed on reduced graphene oxide (rGO) to form CsPbBr3/rGO nanocomposites are synthesized by a facile method. Their corresponding optical and X-ray photon response are investigated. UV–visible absorption spectra and photoluminescence measurements confirm that loading CsPbBr3 nanoparticles with an even distribution onto rGO surface can enhance the absorption and photon-generated carrier transportation. Thus, a significant enhancement in optical and X-ray photon response is demonstrated in CsPbBr3/rGO nanocomposites as compared with pure CsPbBr3 nanoparticles. Clear conductive switching phenomenon with a state conversion between “on” and “off” is also observed under the intermittent x-ray exposure. These results may provide a new potential application of CsPbBr3/rGO nanocomposites for X-ray photon detection.

In order to study the laser plasma instabilities (LPIs) in the context of some novel six-side laser-driven indirect designs like the six-cylinder-port hohlraum and the three-axis cylindrical hohlraum, where the laser beams inject in hohlraum with a large angle. LPI experiments in cylindrical hohlraum with only outer beams were designed and performed based on the current laser arrangement condition of SGIII laser facility for the first time. Stimulated Brillouin backscatter (SBS) was found to be the dominant instability with high instantaneous reflectivity in experiments. A typical feature was obtained in the time-resolved spectra of SBS, which maintained similar for different laser intensities of the interaction beam. The experimental data are analyzed by the hydrodynamic simulations combined with HLIP code, which is based on the ray-tracing model. By analysis of experimental data, it is argued that the mixture of gas and Au in the region of their interface is important to SBS, which indicates the need for the mixture model between the filled gas and the high Z plasma from hohlraum wall in the hydrodynamic simulations. Nonlinear saturation of SBS as well as the smoothed beam are also discussed here. Our effective considerations of the ions pervasion effect and the smoothed beam provide utilitarian ways for improvement of the current ray-tracing method.

Optical diagnostic system plays an important role in inertial confinement fusion (ICF) experiment. Some key physical quantities and parameters in fusion can be diagnosed intuitively. In this review, three typical diagnostic systems on Shengang III facility are introduced, including imaging velocity interferometer system for any reflector (VISAR), fusion-reaction diagnostic system and backscatter light diagnostic system. VISAR can be used to measure velocity of free surface or shock wave traveling history in transparent media, which is an important diagnostic technique for shock wave velocity regulation, material compression characteristics and radiation temperature measurement. The fusion reaction-history diagnostic system can be used to accurately measure the fusion rate of ICF experiment. It’s a key diagnostic technique to study implosion dynamics and understand the mixed effect. Backscatter light diagnostic system is capable to measuring the energetic quotient stimulated by laser and plasma interaction (LPI), which produce important supports for calculating the coupling efficiency of driven laser and target.

In laser driven hohlraums, laser beams on the same incident cone may have different beam and plasma conditions, causing beam-to-beam backscatter difference and subsequent azimuthal variations in the x-ray drive on the capsule. To elucidate the large variation of backscatter proportion from beam to beam in some gas-filled hohlraum shots on Shenguang-III, two 28.5° beams have been measured with the Stimulated Raman Scattering (SRS) time-resolved spectra. A bifurcated fiber is used to sample two beams and then coupled to a spectrometer and streak camera combination to reduce the cost. The SRS spectra, characterized by a broad wavelength, were further corrected considering the temporal distortion and intensity modulation caused by components along the light path. This measurement will improve the understanding of the beam propagation inside the hohlraum and related laser plasma instabilities.