Search

MASER (Measurements, Analysis, and Simulation of Emission in the Radio range) is a comprehensive infrastructure dedicated to time-dependent low frequency radio astronomy (up to about 50 MHz). The main radio sources observed in this spectral range are the Sun, the magnetized planets (Earth, Jupiter, Saturn), and our Galaxy, which are observed either from ground or space. Ground observatories can capture high resolution data streams with a high sensitivity. Conversely, space-borne instruments can observe below the ionospheric cut-off (at about 10 MHz) and can be placed closer to the studied object. Several tools have been developed in the last decade for sharing space physics data. Data visualization tools developed by various institutes are available to share, display and analyse space physics time series and spectrograms. The MASER team has selected a sub-set of those tools and applied them to low frequency radio astronomy. MASER also includes a Python software library for reading raw data from agency archives., Submitted to Data Science Journal special issue after PV2018 conference

The MASER (Measuring, Analysing and Simulating Radio Emissions) project provides a comprehensive infrastructure dedicated to low frequency radio emissions (typically < 50 to 100 MHz). The four main...

Low power, robust technologies are appealing for in situ planetary science throughout the Solar System. The VAPoR (Volatile Analysis by Pyrolysis of Regolith) instrument is under development toward studying soil composition, volatiles, and trapped noble gases in the polar regions of the Moon and on the surface of other airless bodies. VAPoR will ingest a soil sample and conduct analysis by pyrolysis and time-of-flight mass spectrometry (ToF-MS). Two components of the system have been characterized in parallel development: a field-tested sample heater design and a laboratory-based time-of-flight mass spectrometer that emphasizes reduced mass and power through the use of micro- and nanotechnology. The pyrolysis field unit, vacuum-coupled to a commercial residual gas analyzer, has been used in Hawaii to analyze Mauna Kea soils. Water was detected, as were key inorganic pyrolysis products, including CO2 and SO2, and organic volatiles, including methane, benzene, toluene, and various hydrocarbon fragments. In parallel development, a laboratory reflectron time-of-flight mass spectrometer has been designed, assembled, and tested using electron impact ionization from a carbon nanotube electron gun. Preliminary testing reveals a mass resolution of 270.

International audience; The MAVEN spacecraft launched in November 2013, arrived at Mars in September 2014, and completed commissioning and began its one-Earth-year primary science mission in November 2014. The orbiter’s science objectives are to explore the interactions of the Sun and the solar wind with the Mars magnetosphere and upper atmosphere, to determine the structure of the upper atmosphere and ionosphere and the processes controlling it, to determine the escape rates from the upper atmosphere to space at the present epoch, and to measure properties that allow us to extrapolate these escape rates into the past to determine the total loss of atmospheric gas to space through time. These results will allow us to determine the importance of loss to space in changing the Mars climate and atmosphere through time, thereby providing important boundary conditions on the history of the habitability of Mars. The MAVEN spacecraft contains eight science instruments (with nine sensors) that measure the energy and particle input from the Sun into the Mars upper atmosphere, the response of the upper atmosphere to that input, and the resulting escape of gas to space. In addition, it contains an Electra relay that will allow it to relay commands and data between spacecraft on the surface and Earth.

Constellation-X is a multi-satellite X-ray astronomy mission presently being planned for launch in the 2010 time frame. Each of four identical satellites will contain a telescope and instruments for imaging and spectroscopic analysis of hard and soft X-rays. The X-ray Microcalorimeter Spectrometer (XMS) instrument will use arrays of microcalorimeters to detect X-rays with energies from 0.2 to 6 keV. To achieve the desired energy resolution of 2 eV, the detectors will be cooled to 50 mK. The projected cooling power requirement is approximately 5 μW. In order to meet the mission lifetime requirement of 6 years (with a goal of 10 years), a mechanical cryocooler will be used to provide a heat sink for the low temperature cooler. In this paper we discuss the development of a continuous adiabatic demagnetization refrigerator (CADR) that meets the cooling requirements of the XMS instrument. The four-stage CADR presently being tested can operate continuously at 50 mK using a 4.2 K helium bath as a heat sink. Its cooling power of 6 μW at 50 mK exceeds the XMS requirement, and its peak heat rejection rate is less than 7 mW. Details of the CADR's design and operation, as well as the development program leading up to a flight-qualified instrument, are discussed.

A series of R 3 (Ga 1-x Fe x ) 5 O 12 (R=Gd, Dy, Ho; 0

A new nanoscale electric field sensor was developed for studying triboelectric charging in terrestrial and Martian dust devils. The sensor was fabricated using MEMS techniques, integrated at the system level, and deployed during a dust devil field campaign. The two-terminal piezoresistive sensor consists of a micron-scale network of suspended singlewalled carbon nanotubes (SWCNTs) that are mechanically coupled to a free-standing electrically conductor. Electrostatic coupling of the conductor to the electric field is expected to produce a deflection of the conductor and a corresponding change in nanotube device resistance, based on the known piezoresistive properties of SWCNTs. The projected device performance will allow measurement of the large electric fields for large dust devils without saturation. With dimensions on the 100 μm scale and power consumption of only tens of nW, the sensor features dramatically reduced mass, power, and footprint. Recent field testing of the sensor demonstrated the robustness of suspended SWCNT devices to temperature fluctuations, mechanical shock, dust, and other environmental factors.

The lifetime of a patterned carbon nanotube film is evaluated for use as the cold cathode field emission ionization source of a miniaturized mass spectrometer. Emitted current is measured as a function of time for varying partial pressures of nitrogen gas to explore the robustness and lifetime of carbon nanotube cathodes near the expected operational voltages (70-100 eV) for efficient ionization in mass spectrometry. As expected, cathode lifetime scales inversely with partial pressure of nitrogen. Results are presented within the context of previous carbon nanotube investigations, and implications for planetary science mass spectrometry applications are discussed.

The microshutter array (MSA) is a key component in the James Webb Space Telescope Near Infrared Spectrometer (NIRSpec) instrument. The James Webb Space Telescope is the next generation of a space-borne astronomy platform that is scheduled to be launched in 2013. However, in order to effectively operate the array and meet the severe operational requirements associated with a space flight mission has placed enormous constraints on the microshutter array subsystem. This paper will present an overview and description of the entire microshutter subsystem including the microshutter array, the hybridized array assembly, the integrated CMOS electronics, mechanical mounting module and the test methodology and performance of the fully assembled microshutter subsystem. The NIRSpec is a European Space Agency (ESA) instrument requiring four fully assembled microshutter arrays, or quads, which are independently addressed to allow for the imaging of selected celestial objects onto the two 4 mega pixel IR detectors. Each microshutter array must have no more than ~8 shutters which are failed in the open mode (depending on how many are failed closed) out of the 62,415 (365x171) total number of shutters per array. The driving science requirement is to be able to select up to 100 objects at a time to be spectrally imaged at the focal plane. The spectrum is dispersed in the direction of the 171 shutters so if there is an unwanted open shutter in that row the light from an object passing through that failed open shutter will corrupt the spectrum from the intended object.

We are implementing nano- and micro-technologies to develop a miniaturized electron impact ionization mass spectrometer for planetary science. Microfabrication technology is used to fabricate the ion and electron optics, and a carbon nanotube (CNT) cathode is used to generate the ionizing electron beam. Future NASA planetary science missions demand miniaturized, low power mass spectrometers that exhibit high resolution and sensitivity to search for evidence of past and present habitability on the surface and in the atmosphere of priority targets such as Mars, Titan, Enceladus, Venus, Europa, and short-period comets. Toward this objective, we are developing a miniature, high resolution reflectron time-of-flight mass spectrometer (Mini TOF-MS) that features a low-power CNT field emission electron impact ionization source and microfabricated ion optics and reflectron mass analyzer in a parallel-plate geometry that is scalable. Charged particle electrodynamic modeling (SIMION 8.0.4) is employed to guide the iterative design of electron and ion optic components and to characterize the overall performance of the Mini TOF-MS device via simulation. Miniature (< 1000 cm3) TOF-MS designs (ion source, mass analyzer, detector only) demonstrate simulated mass resolutions > 600 at sensitivity levels on the order of 10-3 cps/molecule N2/cc while consuming 1.3 W of power and are comparable to current spaceflight mass spectrometers. Higher performance designs have also been simulated and indicate mass resolutions ~1000, though at the expense of sensitivity and instrument volume.

We have developed microshutter array systems at NASA Goddard Space Flight Center for use as multi-object aperture arrays for a Near-Infrared Spectrometer (NIRSpec) instrument. The instrument will be carried on the James Webb Space Telescope (JWST), the next generation of space telescope, after the Hubble Space Telescope retires. The microshutter arrays (MSAs) are designed for the selective transmission of light from objected galaxies in space with high efficiency and high contrast. Arrays are close-packed silicon nitride membranes with a pixel size close to 100x200 μm. Individual shutters are patterned with a torsion flexure permitting shutters to open 90 degrees with minimized stress concentration. In order to enhance optical contrast, light shields are made on each shutter to prevent light leak. Shutters are actuated magnetically, latched and addressed electrostatically. The shutter arrays are fabricated using MEMS bulk-micromachining and packaged utilizing a novel single-sided indium flip-chip bonding technology. The MSA flight system consists of a mosaic of 2 x 2 format of four fully addressable 365 x 171 arrays. The system will be placed in the JWST optical path at the focal plane of NIRSpec detectors. MSAs that we fabricated passed a series of qualification tests for flight capabilities. We are in the process of making final flight-qualified MSA systems for the JWST mission.

A cold cathode field emission electron gun (e-gun) based on a patterned carbon nanotube (CNT) film has been fabricated for use in a miniaturized reflectron time-of-flight mass spectrometer (RTOF MS), with future applications in other charged particle spectrometers, and performance of the CNT e-gun has been evaluated. A thermionic electron gun has also been fabricated and evaluated in parallel and its performance is used as a benchmark in the evaluation of our CNT e-gun. Implications for future improvements and integration into the RTOF MS are discussed.

A complex MEMS device, microshutter array system, is being developed at NASA Goddard Space Flight Center for use as an aperture array for a Near-Infrared Spectrometer (NirSpec). The instrument will be carried on the James Webb Space Telescope (JWST), the next generation of space telescope after Hubble Space Telescope retires. The microshutter arrays (MSAs) are designed for the selective transmission of light with high efficiency and high contrast. Arrays are close-packed silicon nitride membranes with a pixel size close to 100x200 mm. Individual shutters are patterned with a torsion flexure permitting shutters to open 90 degrees with a minimized mechanical stress concentration. Light shields are made on to each shutter for light leak prevention so to enhance optical contrast. Shutters are actuated magnetically, latched and addressed electrostatically. The shutter arrays are fabricated using MEMS bulk-micromachining technologies and packaged using single-sided indium flip-chip bonding technology. The MSA flight concept consists of a mosaic of 2 x 2 format of four fully addressable 365 x 171 arrays placed in the JWST optical path at the focal plane.

We report on methods to minimize thermally-induced deformation in a MEMS-based reconfigurable aperture. The device is an enabling component of the Near-Infrared Spectrometer, a principle instrument on NASA’s James Webb Space Telescope. The Microshutter Array consists of 384x175 individually addressable shutters which can be magnetically rotated 90° into the plane of the array and electrostatically latched open. Each shutter is a 100x200 μm rectangular membrane suspended by a small neck region and torsion flexure. The primary materials in the shutter are a 5000a Si3N4 layer for mechanical rigidity, 2000a Al for opacity and electrostatic latching, and 2200a Co90Fe10 for magnetic actuation. This multi-layer stack presents a challenge due to the operating temperatures required for the device: both room temperature (300K) and cryogenic temperature (30K). Thermal expansion of the materials causes the shutters to bow out of plane excessively, which can prevent actuation of the shutters, cause damage to portions of the array, and allow light leakage around closed shutters. Here we present our investigation of several methods to prevent microshutter bowing including deposition of additional materials on the shutters to create a symmetrical layer stack and replacing the current stack with low-coefficient of thermal expansion materials. Using shutter-size suspended cantilever beams as a rapid-development test bed, we have reduced out-of-plane bowing between 300K and 30K to 10% or better. We are currently applying these results to microshutter arrays to develop shutters that remain flat from room temperature to cryogenic temperature while retaining the required mechanical, optical, and magnetic properties.

Magnetically actuated MEMS microshutter arrays are being developed at the NASA Goddard Space Flight Center for use in a multi-object spectrometer on the James Webb Space Telescope (JWST), formerly Next Generation Space Telescope (NGST). The microshutter arrays are designed for the selective transmission of light with high efficiency and high contrast. The JWST environment requires cryogenic operation at 45K. Microshutter arrays are fabricated out of silicon-on-insulator (SOI) wafers. Arrays consist of close-packed shutters made on silicon nitride (nitride) membranes with a pixel size of 100 × 100 m. Individual shutters are patterned with a torsion flexure permitting shutters to open 90°, with a minimized mechanical stress concentration. Shutters operated this way have survived fatigue life test. The mechanical shutter arrays are fabricated using MEMS technologies. The processing includes a multi-layer metal deposition, patterning of shutter electrodes and magnetic pads, reactive ion etching (RIE) of the front side to form shutters in a nitride film, an anisotropic back-etch for wafer thinning, and a deep RIE (DRIE) back-etch, down to the nitride shutter layer, to form support frames and relieve shutters from the silicon substrate. An additional metal deposition and patterning has recently been developed to form electrodes on the vertical walls of the frame. Shutters are actuated using a magnetic force, and latched electrostatically. One-dimensional addressing has been demonstrated.