Search

Context. One of the key challenges facing direct exoplanet imaging is the continuous maintenance of the region of high contrast within which light from the exoplanet can be detected above the stellar noise. In high-contrast imaging systems, the dominant source of aberrations is the residual wavefront error that arises due to non-common path aberrations (NCPA) to which the primary adaptive optics (AO) system is inherently blind. Slow variations in the NCPA generate quasi-static speckles in the post-AO corrected coronagraphic image resulting in the degradation of the high-contrast dark hole created by the coronagraph. Aims. In this paper, we demonstrate spatial linear dark field control (LDFC) with an asymmetric pupil vector apodizing phase plate (APvAPP) coronagraph as a method to sense time-varying NCPA using the science image as a secondary wavefront sensor (WFS) running behind the primary AO system. By using the science image as a WFS, the NCPA to which the primary AO system is blind can be measured with high sensitivity and corrected, thereby suppressing the quasi-static speckles which corrupt the high contrast within the dark hole. Methods. On the Subaru Coronagraphic Extreme Adaptive Optics instrument (SCExAO), one of the coronagraphic modes is an APvAPP which generates two PSFs, each with a 180° D-shaped dark hole with approximately 10−4 contrast at λ = 1550 nm. The APvAPP was utilized to first remove the instrumental NCPA in the system and increase the high contrast within the dark holes. Spatial LDFC was then operated in closed-loop to maintain this high contrast in the presence of a temporally-correlated, evolving phase aberration with a root-mean-square wavefront error of 80 nm. In the tests shown here, an internal laser source was used, and the deformable mirror was used both to introduce random phase aberrations into the system and to then correct them with LDFC in closed-loop operation. Results. The results presented here demonstrate the ability of the APvAPP combined with spatial LDFC to sense aberrations in the high amplitude regime (∼80 nm). With LDFC operating in closed-loop, the dark hole is returned to its initial contrast and then maintained in the presence of a temporally-evolving phase aberration. We calculated the contrast in 1 λ/D spatial frequency bins in both open-loop and closed-loop operation, and compared the measured contrast in these two cases. This comparison shows that with LDFC operating in closed-loop, there is a factor of ∼3x improvement (approximately a half magnitude) in contrast across the full dark hole extent from 2−10 λ/D. This improvement is maintained over the full duration (10 000 iterations) of the injected temporally-correlated, evolving phase aberration. Conclusions. This work marks the first deployment of spatial LDFC on an active high-contrast imaging instrument. Our SCExAO testbed results show that the combination of the APvAPP with LDFC provides a powerful new focal plane wavefront sensing technique by which high-contrast imaging systems can maintain high contrast during long observations. This conclusion is further supported by a noise analysis of LDFC’s performance with the APvAPP in simulation.

One of the key noise sources that currently limits high-contrast imaging observations for exoplanet detection is quasi-static speckles. Quasi-static speckles originate from slowly evolving non-common path aberrations (NCPA). The purpose of this work is to present a proof-of-concept on-sky demonstration of spatial Linear Dark Field Control (LDFC). The ultimate goal of LDFC is to stabilize the point spread function (PSF) by addressing NCPA using the science image as additional wavefront sensor. We combined spatial LDFC with the Asymmetric Pupil vector-Apodizing Phase Plate (APvAPP) on the Subaru Coronagraphic Extreme Adaptive Optics system at the Subaru Telescope. In this paper, we report the results of the first successful proof-of-principle LDFC on-sky tests. We present results from two types of cases: (1) correction of instrumental errors and atmospheric residuals plus artificially induced static aberrations introduced on the deformable mirror and (2) correction of only atmospheric residuals and instrumental aberrations. When introducing artificial static wavefront aberrations on the DM, we find that LDFC can improve the raw contrast by a factor of $3$--$7$ over the dark hole. In these tests, the residual wavefront error decreased by $\sim$50 nm RMS, from $\sim$90 nm to $\sim40$ nm RMS. In the case with only residual atmospheric wavefront errors and instrumental aberrations, we show that LDFC is able to suppress evolving aberrations that have timescales of $, Comment: Accepted for publication in Astronomy&Astrophysics. 13 pages, 11 figures, 2 tables

We present new results with the Asymmetric Pupil vector-Apodizing Phase Plate (APvAPP), which combines coronagraphy and wavefront sensing to enable a 100% science duty cycle. We show on-sky results at SCExAO with a non-linear, model-based wavefront sensing algorithm improving the raw contrast by a factor of 2 at 2-4 lambda/D. We also report on the first on-sky demonstration of spatial Linear Dark Field Control with the APvAPP. Together, these algorithms improve the control speed, raw contrast gain and allow more modes to be corrected. Finally, we discuss the path towards coherent differential imaging with the APvAPP.

The design of liquid-crystal diffractive phase plate coronagraphs for ground-based and space-based high-contrast imaging systems is limited by the trade-off between spectral bandwidth and polarization leakage. We demonstrate that by combining phase patterns with a polarization grating (PG) pattern directly followed by one or several separate PGs, we can suppress the polarization leakage terms by additional orders of magnitude by diffracting them out of the beam. \textcolor{black}{Using two PGs composed of a single-layer liquid crystal structure in the lab, we demonstrate a leakage suppression of more than an order of magnitude over a bandwidth of 133 nm centered around 532 nm. At this center wavelength we measure a leakage suppression of three orders of magnitude.} Furthermore, simulations indicate that a combination of two multi-layered liquid-crystal PGs can suppress leakage to $, 23 pages, 15 figures, accepted for publication in PASP

Scattered light imaging has revealed nearly a dozen circumstellar disks around young Herbig Ae/Be stars$-$enabling studies of structures in the upper disk layers as potential signs of on-going planet formation. We present the first images of the disk around the variable Herbig Ae star PDS 201 (V* V351 Ori), and an analysis of the images and spectral energy distribution through 3D Monte-Carlo radiative transfer simulations and forward modelling. The disk is detected in three datasets with LBTI/LMIRCam at the LBT, including direct observations in the $Ks$ and $L'$ filters, and an $L'$ observation with the 360$^\circ$ vector apodizing phase plate coronagraph. The scattered light disk extends to a very large radius of $\sim$250 au, which places it among the largest of such disks. Exterior to the disk, we establish detection limits on substellar companions down to $\sim$5 M$_{Jup}$ at $\gtrsim$1.5" ($\gtrsim$500 au), assuming the Baraffe et al. (2015) models. The images show a radial gap extending to $\sim$0.4" ($\sim$140 au at a distance of 340 pc) that is also evident in the spectral energy distribution. The large gap is a possible signpost of multiple high-mass giant planets at orbital distances ($\sim$60-100 au) that are unusually massive and widely-separated compared to those of planet populations previously inferred from protoplanetary disk substructures., Accepted for publication in AJ

The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument is an extremely modular high-contrast instrument installed on the Subaru telescope in Hawaii. SCExAO has a dual purpose. Its position in the northern hemisphere on a 8-meter telescope makes it a prime instrument for the detection and characterization of exoplanets and stellar environments over a large portion of the sky. In addition, SCExAO's unique design makes it the ideal instrument to test innovative technologies and algorithms quickly in a laboratory setup and subsequently deploy them on-sky. SCExAO benefits from a first stage of wavefront correction with the facility adaptive optics AO188, and splits the 600-2400 nm spectrum towards a variety of modules, in visible and near infrared, optimized for a large range of science cases. The integral field spectrograph CHARIS, with its J, H or K-band high-resolution mode or its broadband low-resolution mode, makes SCExAO a prime instrument for exoplanet detection and characterization. Here we report on the recent developments and scientific results of the SCExAO instrument. Recent upgrades were performed on a number of modules, like the visible polarimetric module VAMPIRES, the high-performance infrared coronagraphs, various wavefront control algorithms, as well as the real-time controller of AO188. The newest addition is the 20k-pixel Microwave Kinetic Inductance Detector (MKIDS) Exoplanet Camera (MEC) that will allow for previously unexplored science and technology developments. MEC, coupled with novel photon-counting speckle control, brings SCExAO closer to the final design of future high-contrast instruments optimized for Giant Segmented Mirror Telescopes (GSMTs)., 12 pages, 9 figures, conference proceedings (SPIE Astronomical telescopes and instrumentation 2018)

The Magellan Extreme Adaptive Optics (MagAO-X) Instrument is an extreme AO system coming online at the end of 2019 that will be operating within the visible and near-IR. With state-of-the-art wavefront sensing and coronagraphy, MagAO-X will be optimized for high-contrast direct exoplanet imaging at challenging visible wavelengths, particularly Hα. To enable high-contrast imaging, the instrument hosts a vector apodizing phase plate (vAPP) coronagraph. The vAPP creates a static region of high contrast next to the star that is referred to as a dark hole; on MagAO-X, the expected dark hole raw contrast is ∼4 × 10 − 6. The ability to maintain this contrast during observations, however, is limited by the presence of non-common path aberrations (NCPA) and the resulting quasi-static speckles that remain unsensed and uncorrected by the primary AO system. These quasi-static speckles within the dark hole degrade the high contrast achieved by the vAPP and dominate the light from an exoplanet. The aim of our efforts here is to demonstrate two focal plane wavefront sensing (FPWFS) techniques for sensing NCPA and suppressing quasi-static speckles in the final focal plane. To sense NCPA to which the primary AO system is blind, the science image is used as a secondary wavefront sensor. With the vAPP, a static high-contrast dark hole is created on one side of the PSF, leaving the opposite side of the PSF unocculted. In this unobscured region, referred to as the bright field, the relationship between modulations in intensity and low-amplitude pupil plane phase aberrations can be approximated as linear. The bright field can therefore be used as a linear wavefront sensor to detect small NCPA and suppress quasi-static speckles. This technique, known as spatial linear dark field control (LDFC), can monitor the bright field for aberrations that will degrade the high-contrast dark hole. A second form of FPWFS, known as holographic modal wavefront sensing (hMWFS), is also employed with the vAPP. This technique uses hologram-generated PSFs in the science image to monitor the presence of low-order aberrations. With LDFC and the hMWFS, high contrast across the dark hole can be maintained over long observations, thereby allowing planet light to remain visible above the stellar noise over the course of observations on MagAO-X. Here, we present simulations and laboratory demonstrations of both spatial LDFC and the hMWFS with a vAPP coronagraph at the University of Arizona Extreme Wavefront Control Laboratory. We show both in simulation and in the lab that the hMWFS can be used to sense low-order aberrations and reduce the wavefront error (WFE) by a factor of 3 − 4 × . We also show in simulation that, in the presence of a temporally evolving pupil plane phase aberration with 27-nm root-mean-square (RMS) WFE, LDFC can reduce the WFE to 18-nm RMS, resulting in factor of 6 to 10 gain in contrast that is kept stable over time. This performance is also verified in the lab, showing that LDFC is capable of returning the dark hole to the average contrast expected under ideal lab conditions. These results demonstrate the power of the hMWFS and spatial LDFC to improve MagAO-X’s high-contrast imaging capabilities for direct exoplanet imaging.

The Optimal Optical CoronagraphWorkshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 30 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. This contribution is the final part of a series of three papers summarizing the outcomes of the workshop, and presents an overview of novel optical technologies and systems that are implemented or considered for high-contrast imaging instruments on both ground-based and space telescopes. The overall objective of high contrast instruments is to provide direct observations and characterizations of exoplanets at contrast levels as extreme as 10^(-10). We list shortcomings of current technologies, and identify opportunities and development paths for new technologies that enable quantum leaps in performance. Specifically, we discuss the design and manufacturing of key components like advanced deformable mirrors and coronagraphic optics, and their amalgamation in "adaptive coronagraph" systems. Moreover, we discuss highly integrated system designs that combine contrast-enhancing techniques and characterization techniques (like high-resolution spectroscopy) while minimizing the overall complexity. Finally, we explore extreme implementations using all-photonics solutions for ground-based telescopes and dedicated huge apertures for space telescopes.

HCIPy is a package written in Python for simulating the interplay between wavefront control and coronagraphic systems. By defining an element which merges values/coefficients with its sampling grid/modal basis into a single object called Field, this minimizes errors in writing the code and makes it clearer to read. HCIPy provides a monochromatic Wavefront and defines a Propagator that acts as the transformation between two wavefronts. In this way a Propagator acts as any physical part of the optical system, be it a piece of free space, a thin complex apodizer or a microlens array. HCIPy contains Fraunhofer and Fresnel propagators through free space. It includes an implementation of a thin complex apodizer, which can modify the phase and/or amplitude of a wavefront, and forms the basis for more complicated optical elements. Included in HCIPy are wavefront errors (modal, power spectra), complex apertures (VLT, Keck or Subaru pupil), coronagraphs (Lyot, vortex or apodizing phase plate coronagraph), deformable mirrors, wavefront sensors (Shack-Hartmann, Pyramid, Zernike or phase-diversity wavefront sensor) and multi-layer atmospheric models including scintillation). HCIPy aims to provide an easy-to-use, modular framework for wavefront control and coronagraphy on current and future telescopes, enabling rapid prototyping of the full high-contrast imaging system. Adaptive optics and coronagraphic systems can be easily extended to include more realistic physics. The package includes a complete documentation of all classes and functions, and is available as open-source software.

The Magellan extreme adaptive optics (MagAO-X) instrument is a new extreme adaptive optics (ExAO) system designed for operation in the visible to near-IR which will deliver high contrast-imaging capabilities. The main AO system will be driven by a pyramid wavefront sensor (PyWFS); however, to mitigate the impact of quasi-static and non-common path (NCP) aberrations, focal plane wavefront sensing (FPWFS) in the form of low-order wavefront sensing (LOWFS) and spatial linear dark field control (LDFC) will be employed behind a vector apodizing phase plate (vAPP) coronagraph using rejected starlight at an intermediate focal plane. These techniques will allow for continuous high-contrast imaging performance at the raw contrast level delivered by the vAPP coronagraph 6 x 10^-5. We present simulation results for LOWFS and spatial LDFC with a vAPP coronagraph, as well as laboratory results for both algorithms implemented with a vAPP coronagraph at the University of Arizona Extreme Wavefront Control Lab., Comment: 17 pages, 22 figures

MagAO-X is an entirely new extreme adaptive optics system for the Magellan Clay 6.5 m telescope, funded by the NSF MRI program starting in Sep 2016. The key science goal of MagAO-X is high-contrast imaging of accreting protoplanets at Hα. With 2040 actuators operating at up to 3630 Hz, MagAO-X will deliver high Strehls (> 70%), high resolution (19 mas), and high contrast (< 1 × 10^(-4)) at Hα (656 nm). We present an overview of the MagAO-X system, review the system design, and discuss the current project status.

We present designs for fully achromatic vector Apodizing Phase Plate (vAPP) coronagraphs, that implement low polarization leakage solutions and achromatic beam-splitting, enabling observations in broadband filters. The vAPP is a pupil plane optic, inducing the phase through the inherently achromatic geometric phase. We discuss various implementations of the broadband vAPP and set requirements on all the components of the broadband vAPP coronagraph to ensure that the leakage terms do not limit a raw contrast of 1E-5. Furthermore, we discuss superachromatic QWPs based of liquid crystals or quartz/MgF2 combinations, and several polarizer choices. As the implementation of the (broadband) vAPP coronagraph is fully based on polarization techniques, it can easily be extended to furnish polarimetry by adding another QWP before the coronagraph optic, which further enhances the contrast between the star and a polarized companion in reflected light. We outline several polarimetric vAPP system designs that could be easily implemented in existing instruments, e.g. SPHERE and SCExAO., Comment: 11 pages, 5 figures, presented at SPIE Astronomical Telescopes and Instrumentation 2018

We present results from a cryogenic characterization of the grating vector Apodizing Phase Plate (gvAPP) coro- nagraph that will be used in the upcoming instrument ERIS (Enhanced Resolution Imager and Spectrograph) at the VLT. ERIS consists of a 1-5 μm imager (NIX) and a 1 2.5 μm integral field spectrograph (SPIFFIER), both fed by the Adaptive Optics Facility of UT4 to yield diffraction-limited spatial resolution. A gvAPP coronagraph will be included in the NIX imager to enable high-contrast imaging observations, which will be particularly powerful for the direct imaging of exoplanets at L and M bands (~3-5 μm) and will compliment the current capabilities of VLT/SPHERE and surpass the capabilities of VLT/NACO. We utilize the near-infrared test bench of the Star and Planet Formation group at ETH Zurich to measure key properties of the gvAPP coronagraph at its operating wavelengths and under the vacuum/cryogenic (~70 K) conditions of the future ERIS instrument.

The Optimal Optical Coronagraph (OOC) Workshop at the Lorentz Center in September 2017 in Leiden, the Netherlands gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. In this first installment of a series of three papers summarizing the outcomes of the OOC workshop, we present an overview of design methods and optical performance metrics developed for coronagraph instruments. The design and optimization of coronagraphs for future telescopes has progressed rapidly over the past several years in the context of space mission studies for Exo-C, WFIRST, HabEx, and LUVOIR as well as ground-based telescopes. Design tools have been developed at several institutions to optimize a variety of coronagraph mask types. We aim to give a broad overview of the approaches used, examples of their utility, and provide the optimization tools to the community. Though it is clear that the basic function of coronagraphs is to suppress starlight while maintaining light from off-axis sources, our community lacks a general set of standard performance metrics that apply to both detecting and characterizing exoplanets. The attendees of the OOC workshop agreed that it would benefit our community to clearly define quantities for comparing the performance of coronagraph designs and systems. Therefore, we also present a set of metrics that may be applied to theoretical designs, testbeds, and deployed instruments. We show how these quantities may be used to easily relate the basic properties of the optical instrument to the detection significance of the given point source in the presence of realistic noise., To appear in Proceedings of the SPIE, vol. 10698

The Optimal Optical Coronagraph (OOC) Workshop held at the Lorentz Center in September 2017 in Leiden, the Netherlands, gathered a diverse group of 25 researchers working on exoplanet instrumentation to stimulate the emergence and sharing of new ideas. In this second installment of a series of three papers summarizing the outcomes of the OOC workshop, we present an overview of common path wavefront sensing/control and Coherent Differential Imaging techniques, highlight the latest results, and expose their relative strengths and weaknesses. We layout critical milestones for the field with the aim of enhancing future ground/space based high contrast imaging platforms. Techniques like these will help to bridge the daunting contrast gap required to image a terrestrial planet in the zone where it can retain liquid water, in reflected light around a G type star from space.

The direct-write technology for liquid-crystal patterns allows for manufacturing of extreme geometric phase patterned coronagraphs that are inherently broadband, e.g. the vector Apodizing Phase Plate (vAPP). We present on-sky data of a double-grating vAPP operating from 2-5 $\mu m$ with a 360-degree dark hole and a decreased leakage term of $\sim 10^{-4}$. We report a new liquid-crystal design used in a grating-vAPP for SCExAO that operates from 1-2.5$\mu m$. Furthermore, we present wavelength-selective vAPPs that work at specific wavelength ranges and transmit light unapodized at other wavelengths. Lastly, we present geometric phase patterns for advanced implementations of WFS (e.g. Zernike-type) that are enabled only by this liquid-crystal technology.

The vector Apodizing Phase Plate (vAPP) is a class of pupil plane coronagraph that enables high-contrast imaging by modifying the Point Spread Function (PSF) to create a dark hole of deep flux suppression adjacent to the PSF core. Here, we recover the known brown dwarf HR 2562 B using a vAPP coronagraph, in conjunction with the Magellan Adaptive Optics (MagAO) system, at a signal-to-noise of S/N = 3.04 in the lesser studied L-band regime. The data contained a mix of field and pupil-stabilised observations, hence we explored three different processing techniques to extract the companion, including Flipped Differential Imaging (FDI), a newly devised Principal Component Analysis (PCA)-based method for vAPP data. Despite the partial field-stabilisation, the companion is recovered sufficiently to measure a 3.94 $\mu$m narrow-band contrast of (3.05$\pm$1.00) $\times$ 10$^{-4}$ ($\Delta$m$_{3.94 {\mu}m}$ = 8.79$\pm$0.36 mag). Combined with archival GPI and SPHERE observations, our atmospheric modelling indicates a spectral type at the L/T transition with mass M = 29$\pm$15 M$_{\text{Jup}}$, consistent with literature results. However, effective temperature and surface gravity vary significantly depending on the wavebands considered (1200$\leq$T$_{\text{eff}}$(K)$\leq$1700 and 4.0$\leq$log(g)(dex)$\leq$5.0), reflecting the challenges of modelling objects at the L/T transition. Observations between 2.4-3.2 $\mu$m will be more effective in distinguishing cooler brown dwarfs due to the onset of absorption bands in this region. We explain that instrumental scattered light and wind-driven halo can be detrimental to FDI+PCA and thus must be sufficiently mitigated to use this processing technique. We thus demonstrate the potential of vAPP coronagraphs in the characterisation of high-contrast substellar companions, even in sub-optimal conditions, and provide new, complementary photometry of HR 2562 B., Comment: 15 pages, 7 figures, accepted for publication in MNRAS