Search

Lens-coupled X-ray computed tomography (X-ray CT) using a transparent scintillator imaged on a CCD camera obtains higher spatial resolution than the more commonly employed phosphor-enhanced amorphous silicon (A-Si) panels. A-Si panels are limited to resolution typically greater than ~200 microns, have a limited working life due to degradation with dose, and provide intrinsically low efficiency with thin (few hundred microns thick) phosphor coatings. Demanding applications such as imaging the interior of complex additively manufactured components require high throughput and high resolution, best achieved with a lens-coupled system. However, for large fields-of-view, very large area but thin transparent scintillators are required – a format difficult to fabricate with high light yield single crystals – therefore, glass scintillators with both modest X-ray interaction and light yield have been used for years. We have developed a new polycrystalline transparent ceramic scintillator, Gd0.3Lu1.6Eu0.1O3, or “GLO,” that offers excellent stopping power and light yield for improved contrast in sizes up to 14” x 14” plates, with thicknesses in the 2-10 mm range, and we are implementing it in systems to increase imaging throughput for 9 MeV Bremsstrahlung X-ray CT. CT imaging performance will be described.

New transparent ceramic scintillators offer advantages for applications in gamma spectroscopy and X-ray imaging. For gamma spectroscopy, excellent light yield, material uniformity, light yield proportionality, mechanical and environmental ruggedness can be achieved in polycrystalline ceramic oxide garnets. We have fabricated 5 in3 Ce-doped Gd garnet transparent ceramics. GYGAG(Ce) garnet transparent ceramics offer $^{\mathbf {\rho \, =\, 5.8g/cm^{3},\,}}$, $z_{eff}=48$, principal decay of 2 O 3 structure structure. The 12” x 12” GLO imaging plates outperform scintillator glass for MeV radiography, due to higher light yield (55,000 Ph/MeV) and better stopping, while providing spatial resolution of >8 lp/mm for MeV X-rays.

Gamma-ray computed tomography (CT) is potentially powerful nondestructive method for assessing the degree of distress that exists in reinforced-concrete structures. In a study to determine the feasibility of using CT to inspect reinforced-concrete specimens, we verified that CT can quantitatively image the internal details of reinforced concrete. To assess the accuracy of CT in determining voids and cracks, we inspected two fiber-reinforced concrete cylinders (one loaded and one unloaded) and a third cylinder containing a single reinforcing bar (rebar). To evaluate the accuracy of CT in establishing the location of reinforcing bars, we also inspected a concrete block containing rebars with different diameters. The results indicate that CT was able to revolve the many different phases in reinforced concrete (voids, cracks, rebars, and concrete) with great accuracy. 15 refs., 10 figs.

Computed Tomography (CT) using penetrating radiation (x- or gamma-rays) can be used in a number of aircraft applications. This technique results in 3D volumetric attenuation data that is related to density and effective atomic number. CT is a transmission scanning method that must allow complete access to both sides of the object under inspection; the radiation source and detection systems must surround the object. This normally precludes the inspection of some large or planar (large aspect ratio) parts of the aircraft. However, we are pursuing recent limited-data techniques using object model information to obtain useful data from the partial information acquired. As illustrative examples, we describe how CT was instrumental in the analysis of particular aircraft components. These include fuselage panels, single crystal turbine blades, and aluminum-lithium composites.© (1993) COPYRIGHT SPIE--The International Society for Optical Engineering. Downloading of the abstract is permitted for personal use only.