Search

Purpose: The aims of this ex vivo study were to evaluate the effectiveness of the Nd:YAP laser in the treatment of dentin hypersensitivity, to compare the temperature rise during laser irradiation at three different dentine thicknesses, and to analyse the composition of the dentine-lased surface., Methods: A total of 33 teeth were used in this study. For scanning electron microscopy (SEM) observation, 24 teeth were transversely sectioned and divided into 4 groups: group A was irrigated with EDTA; group B was irradiated by Nd:YAP laser with 180 mJ energy/per pulse, 0.9 W average power, and 5 Hz frequency (power density [PD] = 229 W/cm 2 ); group C was irradiated by Nd:YAP laser with 280 mJ energy/pulse, 1.4 W average power, and 5 Hz frequency (PD = 356 W/cm 2 ); and group D was irradiated by Nd:YAP with 360 mJ energy/pulse, 1.8 W average power, and 5 Hz frequency (PD = 458 W/cm 2 ). Energy-dispersive spectroscopy (EDS) analysis was performed on the same teeth evaluated for SEM observations. For temperature increase evaluation performed with thermocouples, 9 teeth were transversely sectioned at 3 different thicknesses (3 for each group) of 1, 2, and 3 mm., Results: Statistical analysis showed significant changes in the diameter of the dentinal tubule orifices among all groups; EDS did not show modification of the Ca/P ratio. Temperature increase under irradiation exceeded 5.5 °C only in the group D samples., Conclusions: This ex vivo study, based on temperature recording, SEM observation, and EDS analysis, demonstrated that Nd:YAP laser at a PD of 356 W/cm 2 , corresponding to an average power of 1.4 W, defines the best treatment for dentine hypersensitivity in terms of compromise between efficacy of the treatment and safety of the pulp., (Copyright © 2019 Elsevier B.V. All rights reserved.)

A number of concepts and devices have been proposed for caries removal. Among these, the Er:YAG laser is a potential alternative to conventional mechanical treatment. This study compared the effectiveness of the Er:YAG laser with that of low-speed rotary instruments for removal of carious tissue in 26 extracted human molars and premolars with severe decay (i.e., large occlusal or proximal decay but no pulpal contact). The teeth were divided into three groups of eight teeth, and two teeth were used as controls. After sectioning all the teeth through the center of the carious lesion before excavation, each group was randomly assigned to three groups-Er:YAG laser versus tungsten bur, Er:YAG laser versus polymer bur, and polymer bur versus tungsten bur-to evaluate the efficacy of the three techniques. The time required for carious treatment of each half was recorded, and samples were then histologically examined. Mean duration of caries removal did not significantly differ in relation to the technique used. Histological analysis of tooth halves treated with the Er:YAG laser revealed a regular 5-µm-thick stained layer that appeared to be denatured collagen. A smear layer was often detectable in halves treated with carbide burs. A superficial disorganized layer, which was found to be affected dentin, was observed in halves treated with polymer burs. The present findings indicate that the three techniques were clinically and histologically effective in removing the infected dentin layer.(J Oral Sci 58, 583-589, 2016).

Objective: The aim of this study was to propose an autofluorescence (AF)-guided surgical approach performed with Er:YAG laser and Nd:YAG low-level laser therapy (LLLT)., Background Data: Medication-related osteonecrosis of the jaw (MRONJ) therapy remains an unresolved problem. The proposed conservative and surgical treatment regimens are associated with contradictory success rates. However, the increased experience with MRONJ management suggests that surgical therapy can halt disease progression, and can allow a histology-based diagnosis of osteonecrosis. Surgical approach with Er:YAG laser is associated with significantly better results compared with medical treatment and traditional surgical approaches. One of the difficulties encountered during surgical removal of a MRONJ is the precise individuation of necrotic bone margins., Patient and Methods: A case of Stage III maxillary osteonecrosis treated with a new surgical approach is presented., Results: After 7 months of follow-up, complete mucosal healing was evident, and the patient was free of symptoms. Such a technique allowed a highly accurate and minimally invasive approach through the selective ablation of the non-/hypofluorescent areas., Conclusions: Taking into account the advantages of laser therapy and the possible effectiveness of AF in highlighting surgical margins, this approach would probably achieve excellent outcomes.

The implant surgery consists of two distinct techniques, the transmucosal, also known as "one-stage" and the "two-stage" technique. Lasers represent a possible aid in implant dentistry, especially in the two-stage technique and its main characteristics are represented by a decreased trauma to bone and soft tissues, a reduction of pain as well as a reduction of the risk of postoperative infections. The aim of this study was to analyze in an animal model the thermal elevation induced by four different laser wavelengths (diode, Nd:YAG, Er:YAG, KTP) during the implant uncovering. Four pig jaws were used to carry out this study. Five implants were placed in each anatomical specimen for a total of 20 fixtures. Four wavelengths (532, 810, 1,064 and 2,940 nm) were used to uncover the implants. Two thermocouples were used to measure temperature changes during laser irradiation at bone level, peri-implant tissues and on the fixture surface The thermocouples were connected with two probes of 1.5 mm in diameter, in order to simultaneously recording two temperature variations. Surface temperature was also checked during all procedures with a thermal camera (Thermovision A 800, Flyr Systems, Stockolm, Sweden) connected to a PC. The mean temperatures of each specimen (five fixtures) were calculated (TM1, mean temperature at the beginning; TM2, mean peak temperature). Furthermore, a record of the temperature at 1 min after the end of the surgical procedure was taken (mean: TM3). All the recorded values were statistically evaluated by one-way analysis of variance (ANOVA). The thermocouples recorded a lower increase in temperature for Er:YAG and KTP laser; Nd:YAG and diode laser produced similar increases characterized by higher values. The thermo-camera pointed out the lower increase for Er:YAG and higher for diode laser. KTP laser resulted faster in uncovering implants and diode laser was the one that needed more time. This ex vivo study showed that laser utilization with the recommended parameters gives no risks of dangerous thermal elevation to the tissues and implants.

The purpose of this study was to perform a preliminary in vitro test on the possible use of two different laser wavelengths, 405 and 532 nm, to improve the dental bleaching results. To perform the test, the degradation of a dye, rhodamine B, under the effects of hydrogen peroxide was used. One hundred and twenty vials were divided into four groups of 30 samples each and, while three of them were irradiated with different wavelengths, 365 nm (reference), 405 nm and 532 nm, the fourth was the non-irradiated control group. Each of the four groups was further divided into three subgroups of 10 cuvettes (n = 10) each. The three subgroups included a group with a rhodamine (RH) solution, a rhodamine and hydrogen peroxide (RH + HP) solution and a rhodamine plus hydrogen peroxide and ferrous gluconate (RH + FR) solution. When hydrogen peroxide was present, only UVA irradiation was able to produce significant results, whereas when the photo-Fenton reaction occurred, all the three wavelengths were able to produce a significant degradation of rhodamine B, with better results for longer wavelengths in comparison with short wavelengths. Within the limitations of this in vitro study, the light of the two laser devices, even remaining less effective than UV activation, showed its ability to improve the performance of bleaching agents based on Fenton photocatalysis, whereas when used in combination with hydrogen peroxide only, the 405-nm laser displayed a small effect and the 532-nm laser produced no effects.

Aim: The aim of this paper was to compare pain, health-related quality of life (HRQoL) and need for painkillers during the postoperative course of oral soft tissue surgery performed with neodymium-doped yttrium aluminum garnet (Nd:YAG) laser, quantic molecular resonance (QMR) scalpel and cold blade., Methods: One-hundred and sixty-three similar surgical interventions were subclassified as follows: group 1 (G1), 77 cases performed with Nd:YAG laser; group 2 (G2), 45 cases performed with QMR scalpel and group 3 (G3), 41 cases performed with cold blade. Pain was evaluated using a Visual Analogue Scale (VAS), a Numeric Rating Scale (NRS) and a Verbal Rating Scale-6 (VRS-6) on the same day of surgery (day 0), and at 1, 3 and 7 days after surgery. The HRQoL was evaluated on day 7 using a 0-45 score range questionnaire. On day 7, painkillers taken were recorded., Results: No statistically significant differences could be highlighted in the VAS and NRS scores at day 1, 3 and 7. A trend toward significance at day 0 was evident, with a VAS and NRS average scores lower in G1 than G2 and G3. With regard to VRS-6, the scores resulted statistically lower in G1 than G2 and G3 at day 1 and 3. The HRQoL in G1 was statistically lower than G3., Conclusion: Our study demonstrates that the use of new technologies in oral soft tissue surgery is associated to a reduction of postoperative discomfort. The better HRQoL and the lower postoperative pain observed in laser-treated patients may be associated to the possible bio-modulating effect of the laser.

Cleaning and disinfection of the root canal system are some of the most important goals in endodontic therapy. The aim of this preliminary study is to assess the effectiveness of Er:YAG laser fiber in removing the smear layer produced during root canal walls instrumentation. Forty-eight single-rooted teeth were prepared with manual and rotary Ni-Ti instruments, in addition to 2.5% NaOCl irrigation. Samples were randomly subdivided into groups and treated with: three irradiations of 5 s each, with 300-μm Er:YAG endodontic fiber, 1 W and 2.5% NaOCl solution (A Group); two laser irradiations with 17% EDTA solution and 2.5% NaOCl solution (B Group); laser irradiation plus 17% EDTA solution and 2.5% NaOCl (C Group); only in the final wash of 17% EDTA (control group D). During laser treatment, temperature variations were analyzed by using thermocouple and thermal camera devices in order to test both deep and superficial temperatures. Each sample was finally observed by scanning electron microscope (SEM) at the coronal, medium, and apical thirds at ×500 magnification and blindly scored depending on the amount of smear layer. Statistical analysis of the results was conducted using the Kruskal-Wallis and Mann-Whitney test to determine the eventual significant differences between the quantity of smear layer in each group and between the groups at coronal, medium, and apical third: a p value <0.05 was considered significant. The thermal analysis realized by thermocouple with the used parameters demonstrated that laser endodontic fiber produces an average deep temperature increase of 3.5 ± 0.4 °C; analysis performed with a thermal camera showed an average superficial temperature increase of 1.3 ± 0.2 °C produced by laser endodontic fiber use. Deep and superficial temperatures fall immediately after irradiation possibly without causing structural damage or anatomical alteration inside the root canal and neither on periodontal tissues. SEM analysis showed that specimens of group B had the highest level of cleaning in every third, with a significant difference with groups D and A; group C samples showed a good percentage of cleaned tubules in apical and middle thirds, while group D teeth showed open dentinal tubules in coronal third, with a statistical difference with group A samples which were the worst cleaned. The Er:YAG fiber double irradiation with EDTA 17% and NaOCl 2.5% has been demonstrated to be effective in removing smear layer, even in the apical third which is described as the hardest area to clean during endodontic treatment.

A bactericidal effect has been reported by the use of near-infrared laser light on both Gram-positive and Gram-negative bacteria. The aim of this study was to evaluate the effect of Nd:YAG laser on Actinomyces israelii, filamentous bacteria causing cervicofacial actinomycosis. Experiments were realized on bacterial cells in saline suspension or streaked on Mueller-Hinton (MH) agar plates with or without India ink. Laser application was performed in Eppendorf tubes with different powers and frequencies for 40 s; bacterial suspensions were then streaked on agar plates and incubated at 35 °C in proper conditions for 5 days before colony enumeration. A reduction of colony number variable from 60.13 to 100 % for powers of 2, 4, and 6 W at 25-50 Hz of frequency was observed in comparison with growth control. For agar plates, laser application was performed with different powers at 50 Hz for 60 s. A growth inhibition was observed after 5 days of incubation on MH plates with powers of 6 W and on MH-ink plates with all applied powers. This preliminary study showed a bactericidal effect caused by Nd:YAG laser application worthy to be evaluated in further experiments in vivo.

Objective: Trauma during dental surgery is a predisposing factor for bisphosphonates (BP)-related osteonecrosis of the jaws (BRONJ). However, about 40% of cases of BRONJ are not related to dental invasive procedures, being probably associated to endodontic or periodontal infections. Extraction of non-treatable teeth is considered a reliable choice, to improve symptoms and to reduce the risk of BRONJ. Here we report our experience of tooth extractions in patients under oral or intravenous BP therapy., Study Design: Two-hundred and seventeen patients (38 males, 179 females; mean age 68.72 ± 11.26 years, range 30 to 83 years) under BP therapy received 589 tooth extractions at the Unit of Oral Medicine, Pathology and Laser-assisted Surgery of the University of Parma, Italy, between June 2006 and December 2010. Ninety five patients were under BP therapy for oncological disease (multiple myeloma (MM): 23; bone metastases (BM): 72) and 122 patients for non oncological diseases: 119 osteoporosis (OP), 2 rheumatoid arthritis (RA) and 1 Paget's disease (PD). The mean duration of BP was of 35 months. Antibiotic treatment was administered three days before and 2 weeks after tooth extractions. Patients were additionally treated with low level laser therapy (LLLT) through Nd:YAG laser (1064 nm--power 1.25 W; frequency 15 Hz; fibre diameter: 320 μm), 5 application of 1 minute each. Patients were evaluated 3 days and once a week for 2 months after the extractions and every time they received LLLT. Mean follow-up was 15 months (ranging from 4 to 31 months)., Results: In a total of 589 extractions (285 mandibular, 304 maxillary) performed, a minimal bone exposure was observed in 5 cases, treated with Er:YAG laser vaporization and than healed., Conclusions: Our experience supports the hypothesis that the association of antibiotic treatment and LLLT can be effective in preventing ONJ after tooth extractions in patients under BPT.

Since the introduction of laser in clinical practice, different wavelengths have been used for oral surgery on the basis of the different characteristics and affinities of each one. The aim of this study was a comparison of different laser wavelengths in relation to both thermal increase and "histological quality" in a model of soft tissue surgery procedures. Thermal evaluation was realized, during laser-assisted surgery excision performed on a bovine tongue, by a thermal camera device to evaluate thermal increase on the surface of the sample and with four thermocouples to evaluate thermal increase on the depth of the specimen; temperature was recorded before starting surgical procedure and at the peak of every excision. The quality of excision, in terms of tissue damage and regularity, was realized by two blind examiners on the basis of established criteria. The highest superficial thermal increase was recorded for Superpulse 5-W CO2 laser, the lowest one for Er:YAG laser. The highest in depth thermal increase was recorded for 5 W Diode laser, the lowest one for Er:YAG laser. The best quality of incision was obtained with a 3-W CO2 laser and 3-W diode laser; epithelial, stromal, and vascular damages were evaluated with different degrees for all the used wavelengths with the best result, in terms of "tissue respect," for Er:YAG laser. In all the surgical procedures performed, thermal increase was evaluated until the end of the procedure; at remaining tissue level, thermal decrease was evaluable in the few seconds after surgery. The Er:YAG laser was the device with a lower influence on thermal increase; CO2 and diode lasers revealed a good histological quality. Further studies may be necessary to test the reliability of laser devices for the excision of all the types of specimens needing histological evaluation and diagnosis.

Many dental bleaching techniques are now available, several of them using a laser source. However, the literature on the exact role of coherent light in the biochemical reaction of the whitening process is very discordant. The aims of this in vitro study were: (1) to compare two different laser sources, a KTP laser with a wavelength of 532 nm and a diode laser with a wavelength of 808 nm, during dental bleaching, and (2) to investigate the relationships among changes in gel temperature, tooth shade and hydrogen peroxide (HP) concentration during laser irradiation. Altogether, 116 bovine teeth were bleached using a 30% HP gel, some of them with gel only and others with gel plus one of the two lasers (532 or 808 nm) at two different powers (2 and 4 W). The KTP laser produced a significant shade variation with a minimal temperature increase. The diode laser led to a higher temperature increase with a greater reduction in HP concentration, but the change in shade was only statistically significant with a power of 4 W. At a power of 2 W, the KTP laser caused a greater change in shade than the diode laser. No significant correlations were found among temperature, HP concentration and shade variation. The KTP laser appears to provide better results with less dangerous thermal increases than the diode laser. This might call into question most of the literature affirming that the action of laser bleaching is by increasing the gel temperature and, consequently, the speed of the redox reaction. Further study is required to investigate the correlations between the parameters investigated and efficacy of the bleaching process.

Objective: Literature reports bactericidal and biostimulant effects for Nd:YAG laser procedures on bone and oral mucosa but the possible overheating can cause damage to anatomical structures. The aim of the study was to evaluate the is the evaluation of thermal increase in different levels of oral tissues: mucosa, periosteum and bone during defocused application of Nd:YAG laser at different parameters., Study Design: Superficial thermal evaluation was performed in pig jaws with a thermal camera device; deep thermal evaluation was realized by 4 thermocouples placed at a subperiosteal level and at 1,2 and 4 mm depth in the jaw bone. Laser applications of 1 minute were performed 5 times (with a pause of 1 minute) on a surface of 4 cm² with a Nd:YAG laser (MSP mode, 320 micrometer fiber, defocused mode) with different parameters. Temperatures were recorded before and after laser applications and after each pause in order to evaluate also the thermal relaxation of tissues., Results: At submucosal level, mean thermal increase was between 1.1°C and 13.2°C, at 1 mm depth between 1.1°C and 8.5°C, at 2 mm depth between 1.1°C and 6.8°C, at 4 mm depth between 1.0°C and 5.3°C. Temperature decrease during the rest time period was variable between 0°C and 2.5°C., Conclusions: Temperatures reached during clinical procedures with parameters reported in the literature in biostimulation protocols (1.25-2 Watts) for the five minutes of application are not dangerous for biological structures. The decrease in temperature during the rest time period is less considerable in the bone in comparison to oral mucosa.

Objectives: Since 1962 laser appliances have been used for soft tissues surgery of oral cavity with significant advantages compared to the traditional instruments: excellent bleeding control, possibility to avoid the use of suture, good patient compliance thanks to a decrease of intra- and post-operative discomfort and biostimulating effect. Unfortunately, the wavelengths so far used have been seen to cause, in association with an excellent ablation capacity, heat damage of the tissues that can decrease healing process and cause a greater discomfort to patients. To evaluate the laser-assisted KTP laser surgery at low power in terms of characteristics of intervention and patients compliance., Study Design: In this study, we describe the application of a new and recently introduced in dentistry wavelength, the KTP laser (532 nm), used with low power parameter (1 Watt - CW), evaluating the time of interventions and, by a Numerical Rating Scale, the intra and postoperative pain., Results: KTP laser used at low power permits to obtain good pain control during operations that were carried out with only a topic anaesthetic (EMLA, Astratech), as shown in VAS tests. Good healing with limited or absent burning areas in treated portion of tissue., Conclusions: These preliminary study allows us to affirm that KTP laser with low parameters permits to perform oral surgery with good pain control and good wound healing. A greater number of clinical cases are however necessary to confirm the result obtained.

Background Data: The management of bisphosphonate-related osteonecrosis of the jaws (BRONJ) is still controversial., Objective: The purpose of this study was to compare surgical and nonsurgical approaches to the treatment of BRONJ and the possible usefulness of Nd:YAG and Er:YAG lasers., Methods: One hundred and twenty-eight patients (33 males, 95 females; 52 with diagnosis of multiple myeloma, 53 with diagnosis of bone metastasis, and 23 with diagnosis of osteoporosis) affected by BRONJ were evaluated at the Unit of Oral Pathology and Medicine and Laser-Assisted Surgery of the University of Parma, Italy, between January 2004 and July 2009. Overall number of BRONJ sites was 151, and number of treated sites was 101. In order to assess the efficacy of different treatments, sites were subclassified as follows: Group 1 (G1): 12 sites treated with medical therapy; Group 2 (G2): 27 sites treated with medical therapy associated with low level laser therapy (LLLT); Group 3 (G3): 17 sites treated with a combination of medical and surgical therapy; Group 4 (G4): 45 sites treated with a combination of medical therapy, surgical (including laser-assisted) therapy, and LLLT. Outcome of treatment was assessed using the staging system proposed by Ruggiero et al. Transition from a higher stage to a lower one for at least 6 months was considered as clinical improvement and suggestive of a successful treatment., Results: Clinical improvement was achieved in 3 out of 12 (25%) BRONJ sites in G1. Sites if G2 with an improvement were 18 out of 27 (66%). Nine out 17 BRONJ sites (53%) in G3 had a transition to a lower stage after treatment. For sites in G4, a clinical improvement was recorded in 40 out of 45 cases (89%)., Conclusions: In our experience, the percentage of success obtained with a combined approach based on medical therapy, surgical (including laser-assisted) therapy, and LLLT (G4) is significantly higher than the percentage of improvement obtained in G1, G2, and G3.

The Nd:YAG laser has been used since 1970 in dental laboratories to weld metals on dental prostheses. Recently in several clinical cases, we have suggested that the Nd:YAG laser device commonly utilized in the dental office could be used to repair broken fixed, removable and orthodontic prostheses and to weld metals directly in the mouth. The aim of this work was to evaluate, using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and dynamic mechanical analysis (DMA), the quality of the weld and its mechanical strength, comparing a device normally used in dental laboratory and a device normally used in the dental office for oral surgery, the same as that described for intraoral welding. Metal plates of a Co-Cr-Mo dental alloy and steel orthodontic wires were subjected to four welding procedures: welding without filler metal using the laboratory laser, welding with filler metal using the laboratory laser, welding without filler metal using the office laser, and welding with filler metal using the office laser. The welded materials were then analysed by SEM, EDS and DMA. SEM analysis did not show significant differences between the samples although the plates welded using the office laser without filler metal showed a greater number of fissures than the other samples. EDS microanalysis of the welding zone showed a homogeneous composition of the metals. Mechanical tests showed similar elastic behaviours of the samples, with minimal differences between the samples welded with the two devices. No wire broke even under the maximum force applied by the analyser. This study seems to demonstrate that the welds produced using the office Nd:YAG laser device and the laboratory Nd:YAG laser device, as analysed by SEM, EDS and DMA, showed minimal and nonsignificant differences, although these findings need to be confirmed using a greater number of samples.

Hyperplastic fibro-epithelial lesions are the most common tumor-like swellings in the mouth. The neodymium yttrium aluminium garnet (Nd:YAG) laser appears to be useful for the surgical treatment of these lesions. Some controversies of laser surgery concern the accuracy of pathological diagnosis as well as the control of thermal damage on the target tissue. The aim of this study was to establish if the thermal changes induced by the Nd:YAG laser may affect the histopathological diagnosis and the evaluation of the resection margins. Furthermore, we compared the histological features of oral benign fibro-epithelial lesions excised through Nd:YAG laser and traditional scalpel. Twenty-six benign fibro-epithelial oral lesions from 26 patients, localized in the same oral subsites (cheek and buccal mucosa), were collected at the Unit of Oral Pathology and Oral Laser-assisted Surgery of the Academic Hospital of the University of Parma, Italy. Specimens were subclassified into three groups according to the tool used for the surgical excision. Group 1 included six specimens excised through Nd:YAG laser with an output power of 3.5 W and a frequency of 60 Hz (power density 488,281 W/cm2); Group 2 included nine specimens excised through Nd:YAG laser with an output power of 5 W and a frequency of 30 Hz; Group 3 included 11 specimens excised through a Bard-Parker scalpel blade no. 15c. Epithelial changes, connective tissue modifications, presence of vascular modifications, incision morphology and the overall width of tissue modification were evaluated. Differences between specimens removed with two different parameters of Nd:YAG laser were not significant with regard to stromal changes (p=0.4828) and vascular stasis (p=0.2104). Analysis of regularity of incision revealed a difference which was not statistically significant (p=1.000) between group 1 and group 2. Epithelial and stromal changes were significantly more frequent in specimens with a mean size less than 7 mm (p<0.0001). Nd:YAG laser induced serious thermal effects in small specimens (mean size less than 7 mm) independently from the frequency and power employed. The quality of incision was better and the width of overall tissue injuries was less in the specimens obtained with higher frequency and lower power (group 1: Nd:YAG laser at 3.5 W and 60 Hz).

The neodymium:yttrium-aluminium-garnet (Nd:YAG) laser is currently used in dental laboratories to weld metals on dental prostheses. Recently, the use of Nd:YAG has been suggested so that dentists themselves can repair broken fixed, removable and orthodontic prostheses by welding metals directly in the mouth. This work aimed to evaluate, through a four k-type thermocouple system on calf jaws, the thermal increase in the biological structures close to the metal parts during laser welding. We put two hemispherical metal plates onto mandibular molars and then laser welded them at three points with a four k-thermocouple system to determine the thermal rise in the pulp chamber, sulcus, root and bone. This procedure was carried out on 12 samples, and the results were processed. The highest values of thermal increase were found in the pulp chamber, 1.5 degrees C; sulcus, 0.7 degrees C; root, 0.3 degrees C; and bone, 0.3 degrees C. This study showed that thermal increases in pulp chamber, sulcus, root and bone were biologically compatible and that intra-oral laser welding, at the parameters used in this work, seems to be harmless to the biological structures close to the welding and thermally affected zones.

The possibility of laser welding of dental prostheses offers great advantages: first, the operator has the possibility of welding on the master model, which decreases the number of passages and thus the possibility of errors and damage, and secondly, the patient attends only a few sessions, and, due to the possibility of fixing the damaged prostheses, there is no need to resort to the technician's laboratory. In a previous study we described the experimental phases of intraoral welding, from the in vitro model on animal jaws with evaluations of the temperature variations during welding through thermal chamber and type K thermocouples. In this study we describe the intraoral welding in vivo on human subjects by using, as in the previous study, a fibre-delivered neodymium:yttrium-aluminum-garnet (Nd:YAG) laser. The in vivo phase allowed a restored prosthesis to be positioned and intraorally welded in the upper central sector with optimal results both in patient's comfort and in aesthetic effects. This first in vivo test confirmed that the use of a laser technique for the intraoral welding of metal prostheses is possible, with no particular problems and risks for the biological structures close to the welding zone.

Osteonecrosis of the jaw (ONJ) in patients on long-term bisphosphonate Therapy (BPT) has been reported with increasing frequency in literature over the past 4 years. Therapy for this condition is still a dilemma. Temporary suspension of BPT offers no short-term benefits; hyperbaric oxygen has no proven efficacy and therefore is not recommended. Intermittent or continuous antibiotic therapy with surgical debridement can be beneficial to palliate the symptoms. Er:YAG laser can be used to eliminate necrotic bone portions by partial or total resection as an alternative to conventional rotary devices. In our study, 91 patients affected by ONJ-BP lesion, for a total of 115 ONJ sites were observed between January 2004 and May 2008 (Department of Odontostomatology, University of Parma). Fifty-five ONJ sites were considered for this study in four different groups, retrospectively identified on the basis of treatment performed (G1-G4). G1: 13 ONJ-BP sites were treated with medical therapy (amoxicillin 1gr x 3/die per os with metronidazole 250 mg x 2/die per os) for at least 2 weeks; G2: 17 ONJ-BP sites received medical treatment in association with cycles of low-level laser therapy (LLLT) applications performed using an Nd:YAG laser (1,064 nm) once a week for 2 months; G3: 13 ONJ-BP sites were surgically treated (sequestrectomy of necrotic bone, debridement, corticotomy/surgical removal of alveolar and/or cortical bone); G4: 12 ONJ-BP sites were treated with surgical therapy performed using an Er:YAG laser (2,940 nm) in association with LLLT. Clinical success has been defined for each treatment performed as: (a) complete mucosal healing free from signs and symptoms (classified as stage "0") or (b) transition from a higher to a lower stage (Ruggiero staging) for at least 3 months. All the ONJ-BP sites treated with Er:YAG laser (G4 group) had a clinical improvement (100%) and 87.5% of sites had a complete mucosal healing with a mean follow-up of 13 months. The result obtained in the G4 is extremely significant in comparison with those obtained by medical treatment alone or in a traditional surgical approach. Thanks to the high degree of affinity of this wavelength for water and hydroxyapatite, both soft and bone tissues can be easily treated. This technique can also be used for conservative operations whereby necrotic bone is vaporized until healthy bone is reached. In addition, an additional advantage of the Er:YAG laser is its bactericidal and possible biostimulatory action, accelerating the healing of both soft tissues and bone tissues, in comparison to conventional treatments. In conclusion, from our experience, it is possible to observe that an early conservative surgical approach with Er:YAG laser associated with LLLT, for BP-induced ONJ could be considered as more efficient in comparison with medical therapy or other conventional techniques.

Reports of cases of ONJ are significantly increased during the last five years as a iatrogenic complication of therapy with bisphosphonates (BPT). The aim of this work is to present the advantages of surgery using Er:YAG laser for treatment of ONJ. Er:YAG laser can gradually reach the healthy bone without causing any heating damage of tissues. This device results very versatile and gives the possibility of choose among different surgical techniques depending by the case (e.g.: vaporization or ostectomy). Moreover, different studies have demonstrated the presence of both bactericidal and biomodulating effect on bone and surrounding tissues, with biostimulation of microcirculation and neoangiogenesis. Seventeen sites of ONJ, classified according to the staging system developed by Ruggiero and observed in 12 patients with multiple myeloma (9 patients), bone metastases (2 patients) and osteoporosis (1 patient), were treated with Er:YAG laser (Fidelis Plus, Fotona-Slovenia). Laser device was used in non-contact or near-contact way (VSP, 300 m3 30 Hz, Fluence 60 J/cm2) on 17 sites (4 Stage I and 13 Stage II) on 3 different types of surgery: sequestrectomy + debridement, sequestrectomy + corticotomy and vaporization. For an average follow-up of 9 months (SD +/- 6 months), complete healing of ONJ (Stage 0) was obtained for 13 sites (76.5%) and resolution of symptoms was obtained (Stage 1) for 3 sites (17.5%). For one site at Stage II (6%), recovery was obtained but this result was not maintained over 3 months. Positive results were independent by the anatomical area (mandible or maxilla), primary disease (osteoporosis, multiple myelomas or metastasis) and discontinuation of BPT before surgery. Er:YAG laser (2940 nm), in our experience, represents a valid therapeutic option for ONJ-BP related, especially in early stages of the disease.

Bisphosphonate-associated osteonecrosis was first reported in 2003 and is getting common. Size of lesions, symptoms, and duration of time between starting bisphosphonates and the development of bone necrosis vary. There is currently no effective treatment. We describe our preliminary results with 19 patients affected by bisphosphonate-associated osteonecrosis of the jaws who were treated conventionally with surgical or medical treatment alone or in combination with neodimium: yttrium-aluminium-garnet (Nd:YAG) laser. Clinical variables such as symptoms, presence of pus, and closure of mucosal flaps before and after treatment were evaluated to establish the effect of the laser irradiation. We treated nine patients with laser biostimulation with or without surgical treatment, and in this group there were eight clinical successes and one symptomatic improvement, with a clinical finding better than ones without laser biostimulation (ten patients, five clinical successes, and one symptomatic improvement).

Objective: The aim of this clinical study was to observe and evaluate the surgical management efficiency of soft tissues during orthodontic treatment., Materials and Methods: Thirty-seven young patients were selected and treated by laser-assisted surgery before or during orthodontic treatment and were classified by sex, age, and type of surgical management. Three different wavelengths were used (diode 810 nm, diode 980 nm, and Nd:YAG 1064 nm) in different surgical situations: maxillary vestibular and lingual frenectomies, surgical exposure and alignment of ectopic or retained teeth, and re-contouring gingival overgrowth., Results: In all evaluated patients, the laser treatment was performed without local anesthesia or sutures. Only topical anesthetic was needed., Conclusion: These use of these wavelengths of laser energy was a noticeable aid in the surgical management of soft tissues before or during orthodontic treatment. The benefits of laser treatment include reduced bleeding during surgery with consequent reduced operating time and rapid postoperative hemostasis, thus eliminating the need for sutures. The lack of need for anesthetics and sutures, as well as improved postoperative comfort and healing, make this technique particularly useful for very young patients.