Search

High-power laser facilities may be restricted in operations by the risk of damage to optics due to the backscattering of laser light from the intended target. A portion of this backscattered light can re-enter the beam line and at sufficient fluence may damage (burn) optical apparatus. Here, the observed cumulative burn pattern on mirrors at the National Ignition Facility (NIF) due to stimulated Brillouin scattering (SBS) at the target is explained using detailed simulations. Our methodology involves using a measurement of a phase plate profile installed at the NIF to provide the laser input to a three-dimensional simulation of laser-plasma interaction in a target typical of that fielded at the NIF. Light scattered by SBS at the target is then followed back to the final aperture of the beam line, back through the phase plate, and to a mirror where damage typically occurs. We find that mirror damage patterns are largely dictated by the phase imprint of the phase plate on the returning SBS light. Our simulations show that the instantaneous SBS signal at the mirror varies on a picosecond time scale and is also highly modulated in space. Temporal averaging of the simulated SBS light pattern on the mirror reveals a pattern in close agreement with the experimentally observed damage. Understanding these burn patterns (distribution, modulation depth) may lead to future phase plate designs that limit damage throughout the optics assembly of high-powered laser facilities. [ABSTRACT FROM AUTHOR]

We investigate the formation and diffraction efficiency of plasma gratings generated by the interference of two laser beams crossing at a small angle on the surface of a planar aluminum target. Such gratings were observed during National Ignition Facility experiments with the ratio of energy in the first-order to zeroth order of ≈60%. Recently, additional experiments were performed on the Optical Sciences Laser. These experiments with only two interfering beams showed high normalized energy (ratio of energy in diffracted order to zeroth order) of approximately 10% and 3% at the first and second diffracted order locations, respectively, for intensities less than 1012 W/cm2. The existence of the higher-orders is the characteristic of diffraction from gratings in the Raman-Nath as opposed to the Bragg regime. In addition, we show conical diffraction from the generated plasma grating. Using numerical simulations, we explore the large difference in diffraction efficiency observed in these two experiments and highlight the role of plasma temperature and density scale length. The simulations suggest a modulation depth of the plasma grating refractive index ranging from 1.77 × 10−4 to 3.5 × 10−2. These results are relevant to Inertial Confinement Fusion experiments or plasma photonics applications of gratings in high-field laser-physics and high-energy density science, specifically in the nanosecond regime. [ABSTRACT FROM AUTHOR]

An innovative technique has been developed and used to measure the shock propagation speed along two orthogonal axes in an inertial confinement fusion indirect drive implosion target. This development builds on an existing target and diagnostic platform for measuring the shock propagation along a single axis. A 0.4 mm square aluminum mirror is installed in the ablator capsule which adds a second orthogonal view of the x-ray-driven shock speeds. The new technique adds capability for symmetry control along two directions of the shocks launched in the ablator by the laser-generated hohlraum x-ray flux. Laser power adjustments in four different azimuthal cones based on the results of this measurement can reduce time-dependent symmetry swings during the implosion. Analysis of a large data set provides experimental sensitivities of the shock parameters to the overall laser delivery and in some cases shows the effects of laser asymmetries on the pole and equator shock measurements. [ABSTRACT FROM AUTHOR]

The Hohlraum energetics experimental campaign started in the summer of 2009 on the National Ignition Facility (NIF) [E. I. Moses et al., Phys. Plasmas 16, 041006 (2009)]. These experiments showed good coupling of the laser energy into the targets [N. Meezan et al., Phys. Plasmas 17, 056304 (2010)]. They have also demonstrated controlled crossed-beam energy transfer between laser beams as an efficient and robust tool to tune the implosion symmetry of ignition capsules, as predicted by earlier calculations [P. Michel et al., Phys. Rev. Lett. 102, 025004 (2009)]. A new linear model calculating crossed-beam energy transfer between cones of beams on the NIF has been developed. The model has been applied to the subscale Hohlraum targets shot during the National Ignition Campaign in 2009. A good agreement can be found between the calculations and the experiments when the impaired propagation of the laser beams due to backscatter is accounted for. [ABSTRACT FROM AUTHOR]

The full scale modeling of power transfer between laser beams crossing in plasmas is presented. A new model was developed, allowing calculations of the propagation and coupling of pairs of laser beams with their associated plasma wave in three dimensions. The complete set of laser beam smoothing techniques used in ignition experiments is modeled and their effects on crossed-beam energy transfer are investigated. A shift in wavelength between the beams can move the instability in or out of resonance and hence allows tuning of the energy transfer. The effects of energy transfer on the effective beam pointing and on symmetry have been investigated. Several ignition designs have been analyzed and compared, indicating that a wavelength shift of up to 2 Å between cones of beams should be sufficient to control energy transfer in ignition experiments. [ABSTRACT FROM AUTHOR]

A study of the laser-plasma interaction processes has been performed in multiple-ion species hohlraum plasmas at conditions similar to those expected in indirect drive inertial confinement fusion targets. Gas-filled hohlraums with electron densities of 5.5×1020 and 9×1020 cm-3 are heated by 14.3 kJ of laser energy (wavelength 351 nm) to electron temperatures of 3 keV and backscattered laser light is measured. Landau damping of the ion acoustic waves is increased by adding hydrogen to a CO2 or CF4 gas. Stimulated Brillouin backscattering of a 351 nm probe beam is found to decrease monotonically with increasing Landau damping, accompanied by a comparable increase in the transmission. More efficient energy coupling into the hohlraum by suppression of backscatter from the heater beams results in an increased hohlraum radiation temperature, showing that multiple-ion species plasmas improve the overall hohlraum energetics. The reduction in backscatter is reproduced by linear gain calculations as well as detailed full-scale three-dimensional laser-plasma interaction simulations, demonstrating that Landau damping is the controlling damping mechanism in inertial confinement fusion relevant high-electron temperature plasmas. These findings have led to the inclusion of multiple-ion species plasmas in the hohlraum point design for upcoming ignition campaigns at the National Ignition Facility. [ABSTRACT FROM AUTHOR]

The National Ignition Facility (NIF) is a 192-beam laser facility presently under construction at LLNL. When completed, NIF will be a 1.8-MJ, 500-TW ultraviolet laser system. Its missions are to obtain fusion ignition and to perform high energy density experiments in support of the US nuclear weapons stockpile. Four of the NIF beams have been commissioned to demonstrate laser performance and to commission the target area including target and beam alignment and laser timing. During this time, NIF demonstrated on a single-beam basis that it will meet its performance goals and demonstrated its precision and flexibility for pulse shaping, pointing, timing and beam conditioning. It also performed four important experiments for Inertial Confinement Fusion and High Energy Density Science. Presently, the project is installing production hardware to complete the project in 2009 with the goal to begin ignition experiments in 2010. An integrated plan has been developed including the NIF operations, user equipment such as diagnostics and cryogenic target capability, and experiments and calculations to meet this goal. This talk will provide NIF status, the plan to complete NIF, and the path to ignition. [ABSTRACT FROM AUTHOR]

With the next generation of high-power laser facilities for inertial fusion coming online, ensuring laser beam propagation through centimetre-scale plasmas is a key physics issue for reaching ignition. Existing experimental results including the most recent one are limited to small laser spots, low-interaction laser beam energies and small plasma volumes of 1–2 mm. Here, we demonstrate the propagation of an intense, high-energy, ignition-size laser beam through fusion-size plasmas on the National Ignition Facility (NIF) and find the experimental measurements to agree with full-scale modelling. Previous attempts to apply computer modelling as a predictive capability have been limited by the inherently multiscale description of the full laser–plasma interaction processes. The findings of this study validate supercomputer modelling as an essential tool for the design of future ignition experiments. [ABSTRACT FROM AUTHOR]

It is shown that the measured laser power transmission through a large scale length, high temperature plasma (which emulates an indirect drive ignition-scale plasma) is in approximate agreement with the simulated transmission provided the simulations account for the power loss due to scattering from laser-plasma instabilities. Detailed accounting of the incident, transmitted, scattered, and absorbed powers is used to infer the likely location in the target where most of the scattering occurs along the incident beam trajectory. This location is near the incident laser side of the target at peak electron temperatures for a range of laser intensities. As a result, the backscattered light measurements at peak electron temperature do not require significant adjustment to account for attenuation of the backscattered light as it propagates out through the plasma. © 2000 American Institute of Physics. [ABSTRACT FROM AUTHOR]

Measurements of radiation temperatures from empty and gas-filled hohlraums heated at the Nova Laser Facility [E. M. Campbell et al., Laser Part. Beams 9, 209 (1991)] show efficient coupling of the laser power to the target when applying laser beam smoothing techniques. Scattering losses are reduced to the 3% level while the radiation temperatures increased by ∼15 eV for smoothed laser beams. The experimental findings and supporting calculations indicate that filamentation and gain for stimulated Raman and Brillouin scattering is suppressed in the hohlraum plasma for smoothed laser beams. The scaling of the radiation temperature is well described by integrated radiation hydrodynamic LASNEX modeling [G. B. Zimmerman and W. L. Kruer, Comments Plasma Phys. Controlled Fusion 2, 85 (1975)] following the Marshak scaling. Peak radiation temperatures are in excess of 230 eV in gas-filled hohlraums in agreement with the detailed LASNEX modeling. © 2000 American Institute of Physics. [ABSTRACT FROM AUTHOR]

The National Ignition Facility has been used to compress deuterium-tritium to an average areal density of ∼1.0 ± 0 .1 gem-2, which is 67% of the ignition requirement. These conditions were obtained using 192 laser beams with total energy of 1-1.6 MJ and peak power up to 420 TW to create a hohlraum drive with a shaped power profile, peaking at a soft x-ray radiation temperature of 275-300 eV. This pulse delivered a series of shocks that compressed a capsule containing cryogenic deuterium-tritium to a radius of 25-35 &mgr;m. Neutron images of the implosion were used to estimate a fuel density of 500-800 g cm-3. [ABSTRACT FROM AUTHOR]