Search

A circular capacitive rainfall sensor can operate from non-touch mode to touch mode; that is, under the action of enough rainwater, its movable electrode plate can form a circular contact area with its fixed electrode plate. Therefore, the weight of rainwater is borne by only its movable electrode plate in non-touch mode operation but by both its movable and fixed electrode plates in touch mode operation, and the total capacitance of its touch mode operation is much larger than that of its non-touch mode operation. Essential to its numerical design and calibration is the ability to predict the deflection shape of its moveable electrode plate to determine its total capacitance. This requires the analytical solution to the fluid–structure interaction problem of its movable electrode plate under rainwater. In our previous work, only the analytical solution for the fluid–structure interaction problem before its movable electrode plate touches its fixed electrode plate was obtained, and how to numerically design and calibrate a circular non-touch mode capacitive rainfall sensor was illustrated. In this paper, the analytical solution for the fluid–structure interaction problem after its movable electrode plate touches its fixed electrode plate is obtained, and how to numerically design and calibrate a circular touch mode capacitive rainfall sensor is illustrated for the first time. The numerical results show that the total capacitance and rainwater volume when the circular capacitive rainfall sensor operates in touch mode is indeed much larger than that when the same circular capacitive rainfall sensor operates in non-touch mode, and that the average increase in the maximum membrane stress per unit rainwater volume when the circular capacitive rainfall sensor operates in touch mode can be about 20 times smaller than that when the same circular capacitive rainfall sensor operates in non-touch mode. This is where the circular touch mode capacitive rainfall sensor excels. [ABSTRACT FROM AUTHOR]

The ability to accurately predict the shape of a transversely loaded hollow annular membrane is essential to the design of bending-free hollow annular shells of revolution, which requires a further improvement in the hollow annular membrane solution to meet the needs of this accurate prediction. In this paper, the large deflection problem of a transversely loaded hollow annular membrane is reformulated by simultaneously modifying the out-of-plane equilibrium equation and radial geometric equation, and a newer and more refined power series solution is derived. The reason why the classical radial geometry equation induces errors is revealed. The convergence and asymptotic behavior of the power series solution obtained is analyzed numerically. The newly derived solution is compared with the two previously derived solutions graphically, showing that the newly derived solution performs basically as well as expected. In addition, the anticipated use of the hollow and not-hollow annular membrane solutions for the design application of bending-free annular shells of revolution is discussed. [ABSTRACT FROM AUTHOR]

In this paper, an analytical solution-based method for the design and numerical calibration of polymer conductive membrane-based non-touch mode circular capacitive pressure sensors is presented. The accurate analytical relationship between the capacitance and applied pressure of the sensors is derived by using the analytical solution for the elastic behavior of the circular polymer conductive membranes under pressure. Based on numerical calculations using the accurate analytical relationship and the analytical solution, the analytical relationship between the pressure as output and the capacitance as input, which is necessary to achieve the capacitive pressure sensor mechanism of detecting pressure by measuring capacitance, is accurately established by least-squares data fitting. An example of how to arrive at the design and numerical calibration of a non-touch mode circular capacitive pressure sensor is first given. Then, the influence of changing design parameters such as membrane thickness and Young's modulus of elasticity on input–output relationships is investigated, thus clarifying the direction of approaching the desired input–output relationships by changing design parameters. [ABSTRACT FROM AUTHOR]