Search

The study aimed to present a dual-band 5G multi-input multi-output monopole dual-antenna system, which was configured on the upper edge of the display ground plane for laptops. The dual-antenna unit is a 29 × 2 × 3 mm3 three-dimensional structure with two antennas of the same structure and size, consisting of a fed monopole antenna and a shorted monopole antenna. The antennas are arranged 4 mm apart, side by side in the same direction, to form a dual-antenna unit. Such a configuration allows the feeding points of the two antennas to be separated by the shorting point of the shorted monopole antenna, and the shorting point of the low-frequency resonant path (the shorted monopole antenna) of the two antennas to be larger than a quarter of the wavelength of the low frequency with appropriate bending. The strong current will be concentrated near the shorting point of the shorted monopole antenna when the low-frequency mode is excited, and the current flow from the ground to the feeding point of the other antenna will be reduced, achieving the isolation which is better than 10 dB in measurement between the two antennas without adopting any isolation element. The envelope correlation coefficients calculated from the measured complex E-field radiation patterns are all smaller than 0.12, which can cover the 5G dual-band operations of 3300–3600 and 4800–5000 MHz, and the measured antenna efficiencies can reach more than 40%, which are well suited for multiple antenna applications. [ABSTRACT FROM AUTHOR]

This paper presents a compact configured 5G dual-band MIMO loop antenna system for laptop computers. The antenna system consists of two identical 95 × 2 mm2 four-antenna units that are arranged on the top edge of the display ground plane and are 10 mm away from the left and right sides. The four-antenna unit, each being a two-dimensional loop antenna of the same structure and size, are constructed on the on a 0.4 mm-thick FR4 substrate. The loop antenna with only 23 × 2 mm2 size is composed of a T-shaped feed-in section and a double short-circuit loop. In addition, the four loop antennas are arranged in the same direction and side by side with only 1 mm space to form a high-isolation four-antenna unit. The two sets of four-antenna units can cover 5G dual-band operation at 3300–3600 MHz and 4800–5000 MHz. The measured isolation between eight antennas is all better than 15 dB, the measured antenna efficiency is between 35% and 62%, and the measured envelop correlation coefficient ECC calculated from the electric-field radiation pattern is all less than 0.2. This compactly configured eight-antenna system is only 2 mm high in profile, making it ideal for use in 5G laptops with a high screen-to-body ratio. [ABSTRACT FROM AUTHOR]

This paper presents an LTE MIMO dual antenna system for laptops. The LTE antenna is composed of a fed strip and a shorted strip. The antenna structure is very simple and can cover LTE octa-band operation (LET700/GSM850/900/GSM1800/1900/UMTS /LTE2300/2500) with the antenna size only 50 × 5 mm2 printed on the FR4 substrate. The LTE antenna is a design concept that integrates the metal hinges and ground plane into one of the antenna's resonant paths, which can effectively reduce the size of the antenna and can be tightly configured with the surrounding metal, while at the same time the antenna has good radiation characteristics. To effectively utilize the existing space of laptops, two LTE antennas of the same structure and size are symmetrically arranged in the clearance area on the left and right sides of the hinge of the laptop to form a MIMO dual antenna system. The measured isolation in the operating frequency band is better than 24 dB, while the measured antenna efficiency is better than 40%, which exhibits good antenna characteristics. [ABSTRACT FROM AUTHOR]

A sub 6 GHz dual-band closed-slot multiantenna system for 5G laptops is proposed in this paper. It was installed in a clearance space, with dimensions og 217 × 3 mm2 and 1 mm away from the upper edge of the screen ground plane. The dimensions of the clearance space were the same as those of a multisystem consisting of six antennas. The dimensions of the single closed-slot antenna were 32 × 3 mm2 (0.368 λ × 0.034 λ , where λ equals the free-space wavelength of 3450 MHz. The antenna was coupled to an asymmetric T-shaped feed-in section equipped with a chip capacitor for exciting one-half and full wavelength resonance modes of the closed-slot to encompass sub 6 GHz 3300–3600 MHz and 4800–5000 MHz dual-band operations. The design of the antenna features a long and straight slot to generate the high-order mode of the closed slot in the high-frequency (4800–5000 MHz) band (not the low-frequency (3300–3600 MHz) multiplier band). Its structure is simple, and the width of its slot is only 3 mm. The antennas were arranged to be 5 mm apart in the same direction and in parallel to form a six-antenna system in order to utilize the weak electric fields located at the two closed ends of the closed-slot structure when the closed slot was excited. It showed excellent envelope correlation coefficients (ECCs) and isolation performance without the installation of isolation elements. The measured fractional bandwidth of the antenna was 10.15% and 6.73% at the center frequencies of 3450 MHz and 4900 MHz, respectively. Its measured isolation was always over 10 dB, and the efficiency was between 46% and 76%. The ECCs of the system calculated from the measured complex E-field radiation pattern were all below 0.2, which means that it is ideal for use in laptop devices with a high screen-to-body ratio and a metal back cover. [ABSTRACT FROM AUTHOR]

This paper proposes a DTV/LTE antenna design without physical structure for laptop computers. By changing the laptop's right revolving axis to a non-conductor material and exciting several dipoles and loop paths formed by the display, keyboard ground plane and metal revolving axis using a feed matching circuit at an appropriate position of the slot on the hinge to cover the frequency bands for DTV (470–862 MHz) and LTE (698–960 MHz, 1710–2690 MHz). The feed matching circuit is fitted to the keyboard ground plane adjacent to the hinge. It consists of a 3.6 nH chip inductor and a 0.2 pF chip capacitor to improve the high frequency matching and increase the high frequency bandwidth. The antenna can cover the frequency bands required by DTV and LTE, and the measured antenna efficiency in the operational frequency band is also better than 50%. [ABSTRACT FROM AUTHOR]

A compact planar inverted-F antenna (PIFA) placed on one of the two hinges of a laptop computer is proposed for wireless local-area network (WLAN) operation. The aim of this design is to integrate the PIFA's metal surroundings as part of the radiating structure. When the PIFA is fed, resonant modes in the hinge slot bounded by the two hinges, display ground plane, and keyboard ground plane can in turn be excited. Since the 200 × 5 mm2 slot is much larger than the 10 × 5 mm2 PIFA itself, the latter, although compact and structurally simple, can be made efficiently radiating with the help of the former. Measured efficiencies are all over 50% in the desired three WLAN bands [ABSTRACT FROM AUTHOR]

This study proposes a low-profile switchable LTE/WWAN multi-input and multi-output (MIMO) antenna system for laptops. The main and auxiliary antennas, mirror-imaged of each other, are configured on the left and right sides of the top edge of the display ground plane. The two antennas are each a planar inverted-F antenna (PIFA) having the size of 102 × 5 × 3 mm3. The PIFA structure is matched in impedance with a set of reactive chip elements to increase the antenna operating bandwidth, and is combined with a set of switchable circuits to change the low-frequency resonant path in accordance with the switch status, ON or OFF, thus allowing the low-frequency modes to cover the LTE700 and GSM850/900 bands. Without any isolation element, an isolation of 15 dB or more can be achieved in the MIMO antenna system. The measured realized antenna efficiency is also 48% or greater. [ABSTRACT FROM AUTHOR]

The present study proposed a long-term evolution (LTE) couple-feeding antenna design for laptop computers. The proposed antenna was installed in a closed hinge slot region. The loop structure of the antenna was designed to excite the closed hinge slot’s resonance modes to extend operating bandwidth and antenna efficiency. Although the fabricated antenna measured only 25 mm × 4 mm, it was capable of covering the requirement for eight-band coverage to the LTE standard. Additionally, the antenna consisted of a feeding strip and a shorting strip, with which it was able to excite resonance modes in both its own loop’s modes and the closed hinge slot’s modes. Aside from a wide operating bandwidth, the minute antenna can also overcome the radiation efficiency problem caused by an all-metal environment. With antenna efficiency over 50% within the operating band, the design conforms to the actual needs of applications in laptop computers. [ABSTRACT FROM AUTHOR]

This paper proposes a two-element multi-input multi-output (MIMO) open-slot antenna implemented on the display ground plane of a laptop computer for eight-band long-term evolution/wireless wide-area network operations. The metal surroundings of the antennas have been well integrated as a part of the radiation structure. In the single-element open-slot antenna, the nearby hinge slot (which is bounded by two ground planes and two hinges) is relatively large as compared with the open slot itself and acts as a good radiator. In the MIMO antenna consisting of two open-slot elements, a T slot is embedded in the display ground plane and is connected to the hinge slot. The T and hinge slots when connected behave as a radiator; whereas, the T slot itself functions as an isolation element. With the isolation element, simulated isolations between the two elements of the MIMO antenna are raised from 8.3–11.2 to 15–17.1 dB in 698–960 MHz and from 12.1–21 to 15.9–26.7 dB in 1710–2690 MHz. Measured isolations with the isolation element in the desired low- and high-frequency ranges are 17.6–18.8 and 15.2–23.5 dB, respectively. Measured and simulated efficiencies for the two-element MIMO antenna with either element excited are both larger than 50% in the desired operating frequency bands. [ABSTRACT FROM AUTHOR]

The slot antenna has been utilized for some recent notebook computers on the market. The FR4 substrates are usually required to print the metal patterns for coupled-feeding the 2.4 GHz (2400–2484 MHz) slot and also for contributing the 5.2 GHz (5150–5350 MHz) and 5.8 GHz (5725–5825 MHz) bands. This communication presents a simple, direct-fed slot antenna with a low profile of 7 mm to the top edge of the metal cover for 2.4-/5.2-/5.8-GHz WLAN operation. The antenna design did not require any substrate and can be implemented directly in the metal cover of a notebook computer at low cost. The design comprised two parallel-connected, 0.5-wavelength-slot portions, formed in a linear structure of length 79 mm and constant width 2 mm, and fed by a common antenna feed port using a mini-coaxial cable. The larger slot generated a 0.5-wavelength resonant mode in the 2.4-GHz band and a 1-wavelength mode for 5.2-GHz operation. The smaller slot operated in a 0.5-wavelength resonant mode, which covered the 5.8-GHz band. With a matching inductor properly set in the slot, good input impedance over the 2.4-, 5.2-, and 5.8-GHz bands can be attained. [ABSTRACT FROM PUBLISHER]

This paper proposes a multiple-input multiple-output (MIMO) antenna array comprising two compact wireless local-area network (WLAN) antennas with high isolation in between. The two operating frequency bands are designed to completely enclose the 2.4/5.2/5.8 GHz WLAN bands. The MIMO antenna array having a small size, a low height, and a small thickness is especially suitable to be installed in ultra-thin notebook computers. The size of the designed antenna array has been reduced to about 40% than those of the MIMO arrays appearing in the recent literature. The designed isolation element between the two radiating antennas consists of two resonant slots, the lengths of which are individually a quarter-wavelength at 2.45 and 5.5 GHz. The isolation elements block the horizontal surface currents on the system ground plane, leading to mutualcoupling reduction between the two source antennas and hence excellent isolation between them. Results indicate that the proposed MIMO antenna array has good characteristics of antenna radiation efficiency, and impedance matching in the two bands of interest. [ABSTRACT FROM AUTHOR]