Search

In this work, we present a novel quantitative geographical information system-based procedure to obtain the magnitude (area) and frequency of medium to large first-time shallow slope failures. The procedure has been set up at the Barcedana Valley, in the Tremp Basin (Eastern Pyrenees). First, pixel-based susceptibility classes were defined using a slope stability index obtained with the physically based model SINMAP. The frequency calculated from the number of first-time failures recorded during the last 60 years was then assigned to each susceptibility class. We devised a procedure to estimate the size of potential failures by means of the aggregation of pixels within the boundaries of morphological slope units, optimized for the purpose. Finally, the landslide hazard was prepared using the magnitude-frequency matrix. Results show that a proper pixel clustering has been carried which avoids the generation of small groups of pixels with different susceptibility degrees within the same slope unit. For a given hill slope, the area of the cluster of pixels depends on the size of the slope unit, which is not unique as it depends on the criterion used to delineate them. Therefore, the latter is a key factor in the final results. In this study, we validated our results with the size distribution of the observed landslides. The methodology presented in this work can be applied using any susceptibility assessment method with a pixel-based output. [ABSTRACT FROM AUTHOR]

We release two datasets that track the enhanced landsliding induced by the 2008 Mw 7.9 Wenchuan earthquake over a portion of the Longmen Mountains, at the eastern margin of the Tibetan Plateau (Sichuan, China). The first dataset is a geo-referenced multi-temporal polygon-based inventory of pre- and coseismic landslides, post-seismic remobilisations of coseismic landslide debris and post-seismic landslides (new failures). It covers 471 km 2 in the earthquake's epicentral area, from 2005 to 2018. The second dataset records the debris flows that occurred from 2008 to 2017 in a larger area (∼17000 km 2), together with information on their triggering rainfall as recorded by a network of rain gauges. For some well-monitored events, we provide more detailed data on rainfall, discharge, flow depth and density. The datasets can be used to analyse, on various scales, the patterns of landsliding caused by the earthquake. They can be compared to inventories of landslides triggered by past or new earthquakes or by other triggers to reveal common or distinctive controlling factors. To our knowledge, no other inventories that track the temporal evolution of earthquake-induced mass wasting have been made freely available thus far. Our datasets can be accessed from https://doi.org/10.5281/zenodo.1405489. We also encourage other researchers to share their datasets to facilitate research on post-seismic geological hazards. [ABSTRACT FROM AUTHOR]

Strong earthquakes in mountainous areas can trigger a large number of landslides that generate deposits of loose and unconsolidated debris across the landscape. These deposits can be easily remobilised by rainfalls, with their movement frequently evolving into catastrophic debris flows and avalanches. This has been the fate of many of the 200,000 co-seismic deposits generated by the 2008 Mw 7.9 Wenchuan earthquake in Sichuan, China. Here we present one of the first studies on the post-seismic patterns of landsliding through a detailed multi-temporal inventory that covers a large portion of the epicentral area (462.5 km2). We quantify changes of size-frequency distribution, active volumes and type of movement. We analyse the possible factors controlling landslide activity and we discuss the significance of mapping uncertainties. We observe that the total number of active landslides decreased with time significantly (from 9189 in 2008 to 221 in 2015), and that post-seismic remobilisations soon after the earthquake (2008-2011) occurred stochastically with respect to the size of the co-seismic deposits. Subsequently (2013-2015), landslide rates remained higher in larger deposits than in smaller ones, particularly in proximity to the drainage network, with channelised flows becoming comparatively more frequent than hillslope slides. However, most of the co-seismic debris remained along the hillslopes and are largely stabilised, urging to rethink the way we believe that seismic activity affects the erosion patterns in mountain ranges. [ABSTRACT FROM AUTHOR]

Rock avalanches represent a serious risk for human lives, properties, and infrastructures. On June 24, 2017, a catastrophic landslide destroyed the village of Xinmo (Maoxian County, Sichuan, China) causing a large number of fatalities. Adjacent to the landslide source area, further potentially unstable masses were identified. Among them, a 4.5-million m3 body, displaced during the landslide event by about 40 m, raised serious concerns. Field monitoring and a reliable secondary risk assessment are fundamental to protect the infrastructure and the population still living in the valley. In this framework, the use of distinct element methods and continuum model methods to simulate the avalanche process was discussed. Various models (PFC, MatDEM, MassMov2D, Massflow) were used with the aim of reproducing the Xinmo landslide and, as predictive tools, simulating the kinematics and runout of the potentially unstable mass, which could cause a new catastrophic event. The models were all able to reproduce the first-order characteristics of the landslide kinematics and the morphology of the deposit, but with computational times differing by several orders of magnitude. More variability of the results was obtained from the simulations of the potential secondary failure. However, all models agreed that the new landslide could invest several still-inhabited buildings and block the course of the river again. Comparison and discussion of the performances and usability of the models could prove useful towards the enforcement of physically based (and multi-model) risk assessments and mitigation countermeasures. [ABSTRACT FROM AUTHOR]

We release two datasets that track the enhanced landsliding induced by the Mw 7.9 2008 Wenchuan earthquake over a portion of the Longmen mountains, at the eastern margin of the Tibetan plateau (Sichuan, China). The first dataset is a geo-referenced multi-temporal polygon-based inventory of pre- and coseismic landslides, post-seismic remobilisations of coseismic landslide debris, and post-seismic landslides (new failures). The inventory covers 462.5 km² in the earthquake's epicentral area, from 2005 to 2015. The second dataset records the debris flows that occurred from 2008 to 2017 in a larger area (~ 17,000 km²), together with information on their triggering rainfalls recorded by a network of rain gauges. For some well-monitored event, we provide detailed information on rainfall, discharge, flow depth and density. The datasets can be used to analyse, at various scales, the patterns of enhanced landsliding caused by the earthquake. They can be compared to inventories relative to past or new earthquakes or other triggers to reveal common or distinctive controlling factors. To our knowledge, no other inventories that track the temporal evolution of earthquake-induced mass wasting have been made freely available thus far. Our datasets are available at https://doi.org/10.5281/zenodo.1405490. We also encourage other researchers to share their datasets to facilitate research on post-seismic geological hazards. [ABSTRACT FROM AUTHOR]