Search

Objectives: Land subsidence caused by long-term over-exploitation of groundwater is one of major problems in Beijing. Since the opening of the South-to-North Water Transfer Project, the problem of water shortage in Beijing has been greatly alleviated, and the pressure of land subsidence has been reduced to a certain extent. Methods: In order to analyze the development of land subsidence after the start of the South-to-North Water Transfer in Beijing, ascending and descending time-series interferometric synthetic aperture radar (InSAR) technique is used to monitor land subsidence in Beijing. First, the mean deformation velocity and cumulative deformation in line of sight in Beijing from January 2015 to December 2020 is obtained by the small baseline subset InSAR. Second, the robust least square fitting method is used to fuse the deformation results of the lifting rail, after that the global positioning system monitoring data are compared with the fusion results of lifting rail. Finally, the variation trend between the deformation results obtained by the robust least quadratic fitting and groundwater data is analyzed. Results: The deformation results show that the center of Beijing is basically stable and the deformation distribution is not uniform. The maximum ascending annual deformation velocity and the maximum ascending cumulative deformation amount reach −134 mm/a and −697 mm respectively. The maximum descending annual deformation velocity and the maximum descending cumulative deformation amount reach −135 mm/a and −734 mm respectively. And the fusion results obtained by the least square fitting method has reliability and accuracy. Conclusions: The subsidence rate in Beijing shows a decreasing trend with the gradual increase of groundwater level. In general, the middle route of South-to-North Water Transfer Project has alleviated the expansion trend of land subsidence in Beijing to a certain extent. [ABSTRACT FROM AUTHOR]

Ground subsidence often occurs over a large area. Although traditional monitoring methods have high accuracy, they cannot perform wide-area ground deformation monitoring. Synthetic Aperture Radar (SAR) interferometry (InSAR) technology utilizes phase information in SAR images to extract surface deformation information in a low-cost, large-scale, high-precision, and high-efficiency manner. With the increasing availability of SAR satellite data and the rapid development of InSAR technology, it provides the possibility for wide-area ground deformation monitoring using InSAR technology. Traditional time-series InSAR methods have cumbersome processing procedures, have large computational requirements, and rely heavily on manual intervention, resulting in relatively low efficiency. This study proposes a strategy for wide-area InSAR multi-scale deformation monitoring to address this issue. The strategy first rapidly acquires ground deformation information using Stacking technology, then identifies the main subsidence areas by setting deformation rate thresholds and visual interpretation, and finally employs advanced TS-InSAR technology to obtain detailed deformation time series for the main subsidence areas. The Turpan Basin in Xinjiang, China, was selected as the study area (7474.50 km2) to validate the proposed method. The results are as follows: (1) The basin is generally stable, but there is ground subsidence in the southern plain area, mainly affecting farmland. (2) From 2016 to 2019, the maximum subsidence rate in the farmland area was approximately 0.13 m/yr, with a maximum cumulative subsidence of about 0.25 m, affecting a total area of approximately 952.49 km2. The subsidence mainly occurred from late spring to mid-autumn, while lifting or subsidence mitigation occurred from late autumn to early spring. The study also analyzed the impacts of rainfall, geographical environment, and human activities on subsidence and found that multiple factors, including water resource reduction, overexploitation, geological characteristics, and the expansion of human activities, contributed to the subsidence problem in the Turpan Basin. This method contributes to wide-area InSAR deformation monitoring and the application of InSAR technology in engineering. [ABSTRACT FROM AUTHOR]

The Lianjiang Plain, renowned for its position as 'China's textile hub' and characterized by its high population density, has experienced considerable subsidence due to excessive groundwater extraction in recent years. Although some studies have investigated short-term subsidence in this plain, research on long-term subsidence and rebound remain understudied. In this paper, the characteristics of surface deformation in the Lijiang Plain during two periods (2015–2017 and 2018–2021) have been investigated using the time-series interferometric synthetic aperture radar (TS-InSAR) technique, and the correlation with the changes in groundwater level, geological factors, and urban construction are discussed. The InSAR-derived results are cross-validated with the adjacent orbit datasets. Large-scale and uneven subsidence ranging from −124 mm/year to +40 mm/year is observed from 2015 to 2017. However, a significant decrease in the subsidence rate during 2018–2021, with local rebound deformation up to +48 mm/year in three regions, is also observed. Groundwater level changes are found to be the major cause of the ground deformation, and the intercomparison between groundwater level and ground displacement time series from TS-InSAR measurements also indicates a clear relationship between them during 2018–2021. Geological factors control the range of deformation area over the study period. The impact of urban construction on surface subsidence is evident, contributing to high deformation. Our findings could improve the understanding of how deformation is affected by groundwater rebound and offer valuable insights into groundwater management, urban planning, and land subsidence mitigation. [ABSTRACT FROM AUTHOR]

Land subsidence can be observed with time-series of Interferometric Synthetic Aperture Radar (InSAR) data. However, existing approaches only reveal subsidence signals that are multi-scale mixed, which is not conducive to the systematic analysis of subsidence of different mechanisms. A deformation signal decomposition (DSD) method based on spectral analysis is used to decompose the deformation extracted by time-series InSAR into three classes of deformation signals. They refer to large-scale deformation related to geological settings, medium-scale deformation caused more by group excavation, and small-scale deformation along linear infrastructures. TerraSAR-X datasets for Shanghai spanning April 2013 to September 2020, and Sentinel-1A datasets spanning January 2016 to September 2020 are used in this study. The results were cross-verified between the TerraSAR-X and Sentinel-1A datasets, and validated against levelling measurements. Subsidence signals caused by different mechanisms were automatically decomposed, which facilitates a systematic analysis for targeted diagnosis of land subsidence signals. A detailed analysis was conducted jointly at three scales of surface displacement, geological conditions, major construction activities, and subsidence mechanisms. It indicated that construction activities were the leading cause of land subsidence, and suggests that local authorities that wish to mitigate surface subsidence may benefit from primarily considering this process.

The main city of Kunming is located on the north bank of Dianchi Lake. The complex geological environment, large-scale construction, and expansion of the city in recent years have caused uneven land surface subsidence and threatened public safety. In this study, Sentinel-1 ascending and descending orbit datasets were collected for the period of February 2018 to May 2021. The characteristics of surface displacement in the Kunming downtown area were monitored using the time-series interferometric synthetic aperture radar (InSAR) technique, and attribution analysis was performed. It was found that areas with more severe surface settlement were concentrated in the International Exhibition Center area and the large, newly built communities near Dianchi Lake and the Xiaobanqiao Region. The multifactor attribution analysis results demonstrated that the subsidence areas are concentrated in urban villages and engineered, construction-intensive areas in the lakeside sedimentary layer area, with the maximum displacement rate reaching −23.12 mm/a in the line-of-sight direction of the Sentinel-1 ascending dataset. The reliability of the InSAR results was cross-validated with ascending and descending results. This study provides a scientific reference for urban development planning and potential geological disaster detection in Kunming. [ABSTRACT FROM AUTHOR]

In recent years, increasing available synthetic aperture radar (SAR) satellite data and gradually developing interferometric SAR (InSAR) technology have provided the possibility for wide-scale ground-deformation monitoring using InSAR. Traditionally, the InSAR data are processed by the existing time-series InSAR (TS–InSAR) technology, which has inefficient calculation and redundant results. In this study, we propose a wide-area InSAR variable-scale deformation detection strategy (hereafter referred to as the WAVS–InSAR strategy). The strategy combines stacking technology for fast ground-deformation rate calculation and advanced TS–InSAR technology for obtaining fine deformation time series. It adopts an adaptive recognition algorithm to identify the spatial distribution and area of deformation regions (regions of interest, ROI) in the wide study area and uses a novel wide-area deformation product organization structure to generate variable-scale deformation products. The Turpan–Hami basin in western China is selected as the wide study area (277,000 km2) to verify the proposed WAVS–InSAR strategy. The results are as follows: (1) There are 32 deformation regions with an area of ≥1 km2 and a deformation magnitude of greater than ±2 cm/year in the Turpan–Hami basin. The deformation area accounts for 2.4‰ of the total monitoring area. (2) A large area of ground subsidence has occurred in the farmland areas of the ROI, which is caused by groundwater overexploitation. The popularization and application of facility agriculture in the ROI have increased the demand for irrigation water. Due to the influence of the tectonic fault, the water supply of the ROI is mainly dependent on groundwater. Huge water demand has led to a continuous net deficit in aquifers, leading to land subsidence. The WAVS–InSAR strategy will be helpful for InSAR deformation monitoring at a national/regional scale and promoting the engineering application of InSAR technology. [ABSTRACT FROM AUTHOR]

In this study, the probability integral method, Synthetic Aperture Radar Interferometry (InSAR), and the Okada dislocation model were collaboratively used to analyze deformation in the Alhada Pb-Zn mine. The predicted deformation values of the subsidence centers in three subsidence areas were 107 mm, 120 mm, and 83 mm, respectively, as predicted using the probability integral method. The coherent scatterer InSAR technique was used to analyze the time-series deformation of the mining area, and the same subsidence center locations and similar deformation values were observed. The Okada dislocation model was used to invert the optimal parameters of the underground-mining ore body causing the surface subsidence, indicating that the surface subsidence is mainly caused by the mining of ore bodies in the 888 and 848 middle sections. We further simulated ground deformation using the multi-source Okada model. The results showed that the predicted and modeled deformations are highly correlated with the observed deformation. Through the analysis and comparison of the InSAR results, it was concluded that the three subsidence areas do not threaten the stability of the main buildings in the mining area. Using theoretical, observational, and modeling methods, the development and evolution of the subsidence area in mines can be established, which could provide basic data for subsidence control work and guarantee mine production safety. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Guangdong University of Technology is the property of Journal of Guangdong University of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Land subsidence can be observed with time-series of Interferometric Synthetic Aperture Radar (InSAR) data. However, existing approaches only reveal subsidence signals that are multi-scale mixed, which is not conducive to the systematic analysis of subsidence of different mechanisms. A deformation signal decomposition (DSD) method based on spectral analysis is used to decompose the deformation extracted by time-series InSAR into three classes of deformation signals. They refer to large-scale deformation related to geological settings, medium-scale deformation caused more by group excavation, and small-scale deformation along linear infrastructures. TerraSAR-X datasets for Shanghai spanning April 2013 to September 2020, and Sentinel-1A datasets spanning January 2016 to September 2020 are used in this study. The results were cross-verified between the TerraSAR-X and Sentinel-1A datasets, and validated against levelling measurements. Subsidence signals caused by different mechanisms were automatically decomposed, which facilitates a systematic analysis for targeted diagnosis of land subsidence signals. A detailed analysis was conducted jointly at three scales of surface displacement, geological conditions, major construction activities, and subsidence mechanisms. It indicated that construction activities were the leading cause of land subsidence, and suggests that local authorities that wish to mitigate surface subsidence may benefit from primarily considering this process. [ABSTRACT FROM AUTHOR]

Abnormal surface subsidence has become a widespread geological problem being faced by cities. As a first-tier city in the world, there are problems such as unclear analysis of subsidence mechanism. Therefore, the monitoring of the Shanghai surface is particularly important. In this paper, the Sentinel-1A satellite SAR image data of 36 scenes covering Shanghai area from January 2018 to March 2020 were processed on the basis of time-series interferometry synthetic aperture radar technique. The subsidence rate field and accumulated surface subsidence in Shanghai area during the study period were obtained, and the spatial–temporal distribution characteristics of subsidence in the study area were discussed and analyzed from many different aspects. Moreover, the correlation between regional subsidence and geological structure, precipitation, urbanization, and other influencing factors were analyzed and established. Results show that the non-uniform subsidence in Shanghai area is clear, and those of the districts of eastern Songjiang, southern Jinshan, and Fengxian are more serious with a maximum subsidence rate of −26.2 mm/year. After analyzing the causes of subsidence, the special foundation of soft soil in Shanghai area is determined as the main reason for the subsidence, and the uneven subsidence is mainly caused by the over-exploitation of groundwater, human activities, and the subsidence of soil layer. Through comparative analysis, factors, such as rainfall, groundwater, and urbanization process, have high correlation with surface subsidence. [ABSTRACT FROM AUTHOR]

Atmospheric delay (AD) is the main source of error in time-series interferometric synthetic aperture radar (InSAR) deformation estimation over large areas. In this study, we propose a bidirectional gated recurrent unit (BiGRU) model to correct random and seasonal ADs adaptively. The BiGRU model decomposes InSAR time-series measurements into non-seasonal and seasonal components by adopting a branched network structure and extracting component-wise features separately. To remove seasonal ADs and meanwhile preserve true seasonal deformation, a dense and fully connected layer with weighted feature learning was designed. Five typical time-series deformation patterns were simulated for model training, and its robustness was evaluated using synthetic data. We applied the trained model to two city clusters in China (Guangdong and Jiangxi-Hunan) using 178 Sentinle-1 images. The results showed that BiGRU with moderate Generic Atmospheric Correction Online Service (GACOS) and spatiotemporal filtering (pGA_Fi_BiGRU) reduced the standard deviation of InSAR time-series measurements by 64.3% in the Guangdong region and by 53.5% in the Jiangxi-Hunan region compared with the raw data. Compared with the traditional combined GACOS and spatiotemporal filtering processing methods, the pGA_Fi_BiGRU improved the AD reduction performance by 4.7% and by 8.5% in Guangdong and Jiangxi-Hunan, respectively. The InSAR time-series deformation after pGA_Fi_BiGRU processing removed residual ADs and preserved true deformation, which agreed well with the geodetic leveling and Global Navigation Satellite System data. The first overall subsidence velocity of the Irrawaddy Delta city cluster in Myanmar was then mapped, followed by time-series deformation estimation using pGA_Fi_BiGRU. Representative time-series deformation due to groundwater extraction, coastal erosion, and accretion were properly derived, suggesting that the proposed model can be generalized to other city clusters with different atmospheric noise and geophysical dynamics. • Land subsidence of two city clusters was measured using Sentinel-1 images. • The pGA_Fi_BiGRU model was proposed to correct the seasonal ADs. • The performance enhancement in AD reduction varied across different cities. • Generalizability was demonstrated using the third city cluster. [ABSTRACT FROM AUTHOR]

Global sea-level rise due to climate change is a critical problem for coastal cities. One of the coastal cities in Indonesia, Semarang, is in danger of being submerged by seawater due to flooding, which is exacerbated by land subsidence. Time-series analysis based on persistent scatterer (PS) interferometry usually suffers from sparse measurement points (MP), and thus does not completely cover the study area with low coherence. In this study, we utilized improved combined scatterers interferometry with optimized point scatterers (ICOPS) to increase the MP density. We also compared the optimization of the ICOPS method based on support vector regression (SVR) with convolutional neural network (CNN) algorithms. The ICOPS-CNN showed better model performance and MP density, and was less time-consuming. Further land subsidence analysis was conducted in Semarang using susceptibility mapping. The land subsidence susceptibility map from the standalone deep learning (DL) algorithm (CNN = 0.833) outperformed the standalone machine learning (ML) algorithm (SVR = 0.820). The hybrid DL algorithm with grey wolf optimizer (GWO) (CNN-GWO = 0.907) exhibited the highest accuracy, followed by the hybrid ML algorithm (SVR-GWO = 0.843). The accuracy was consistent with the comparison between the susceptibility maps and the ICOPS measurements, resulting in a susceptibility map based on CNN-GWO with the highest accuracy (0.889). Land subsidence monitoring using ICOPS based on CNN and susceptibility mapping based on a hybrid DL algorithm (CNN-GWO) can be used by local governments to improve urban development planning in Semarang and its surrounding areas. • Land subsidence in Semarang is monitored by ICOPS-CNN and ICOPS-SVR. • ICOPS-CNN method was better in performance, MP density, and time-consumption. • Hybrid machine learning and deep learning are used for susceptibility mapping. • The accuracy of the CNN-GWO susceptibility map outperforms all models. [ABSTRACT FROM AUTHOR]

• Obtain the long-term and regional-scale InSAR deformations of JSOAA. • Locate many subsidence areas in JSOAA, which are expanding. • Model the groundwater overpumping related settlement by an analytical model. • The aquifer in JSOAA is suffering permanent loss. Groundwater is the main water source for agricultural irrigation in arid/semi-arid agricultural region. Overexploitation of groundwater inevitably leads to permanent loss of aquifer and ground subsidence. The oasis agricultural area in the southern Junggar basin (JSOAA) is one of the largest oasis agricultural areas in western China. In this study, we, for the first time, recover the regional-scale ground displacements time-series of JSOAA, using all ALOS-1/PALSAR (2007–2010) and Sentinel-1 (2015–2020) data. The results show that there are multiple subsidence areas related to groundwater overexploitation. From 2007 to 2010, the area with a subsidence rate greater than 10 mm/yr is about 5876.2 km2, accounting for 13.2 % of the total area of JSOAA. From 2015 to 2020, these values are about 16146.7 km2 and 36.3 %. In the areas with concentrated groundwater exploitation, the small separate subsidence areas grew larger and became connected, and finally developed into giant subsidence clusters. The maximum cumulative deformation of JSOAA exceeded 400 mm from 2007 to 2010, and 500 mm from 2015 to 2020. We modeled the surface subsidence caused by the permanent aquifer loss, and estimated the volume strain of aquifer in JSOAA. The total volume strain of the aquifer is 2.73 km3 between 2007 and 2020. Moreover, we estimated the aquifer storage coefficient and the net groundwater deficit of JSOAA. The results of this study will serve for JSOAA aquifer health detection, ecological environment stability assessment, and sustainable development of the agricultural economy. [ABSTRACT FROM AUTHOR]

In recent years, many cities in the Chinese loess plateau (especially in Shanxi province) have encountered ground subsidence problems due to the construction of underground projects and the exploitation of underground resources. With the completion of the world's largest geotechnical project, called "mountain excavation and city construction," in a collapsible loess area, the Yan'an city also appeared to have uneven ground subsidence. To obtain the spatial distribution characteristics and the time-series evolution trend of the subsidence, we selected Yan'an New District (YAND) as the specific study area and presented an improved time-series InSAR (TS-InSAR) method for experimental research. Based on 89 Sentinel-1A images collected between December 2017 to December 2020, we conducted comprehensive research and analysis on the spatial and temporal evolution of surface subsidence in YAND. The monitoring results showed that the YAND is relatively stable in general, with deformation rates mainly in the range of −10 to 10 mm/yr. However, three significant subsidence funnels existed in the fill area, with a maximum subsidence rate of 100 mm/yr. From 2017 to 2020, the subsidence funnels enlarged, and their subsidence rates accelerated. Further analysis proved that the main factors induced the severe ground subsidence in the study area, including the compressibility and collapsibility of loess, rapid urban construction, geological environment change, traffic circulation load, and dynamic change of groundwater. The experimental results indicated that the improved TS-InSAR method is adaptive to monitoring uneven subsidence of deep loess area. Moreover, related data and information would provide reference to the large-scale ground deformation monitoring and in similar loess areas. [ABSTRACT FROM AUTHOR]

Areas at risk of land subsidence in Jakarta can be identified using a land subsidence susceptibility map. This study evaluates the quality of a susceptibility map made using functional (logistic regression and multilayer perceptron) and meta-ensemble (AdaBoost and LogitBoost) machine learning algorithms based on a land subsidence inventory map generated using the Sentinel-1 synthetic aperture radar (SAR) dataset from 2017 to 2020. The land subsidence locations were assessed using the time-series interferometry synthetic aperture radar (InSAR) method based on the Stanford Method for Persistent Scatterers (StaMPS) algorithm. The mean vertical deformation maps from ascending and descending tracks were compared and showed a good correlation between displacement patterns. Persistent scatterer points with mean vertical deformation value were randomly divided into two datasets: 50% for training the susceptibility model and 50% for validating the model in terms of accuracy and reliability. Additionally, 14 land subsidence conditioning factors correlated with subsidence occurrence were used to generate land subsidence susceptibility maps from the four algorithms. The receiver operating characteristic (ROC) curve analysis showed that the AdaBoost algorithm has higher subsidence susceptibility prediction accuracy (81.1%) than the multilayer perceptron (80%), logistic regression (79.4%), and LogitBoost (79.1%) algorithms. The land subsidence susceptibility map can be used to mitigate disasters caused by land subsidence in Jakarta, and our method can be applied to other study areas. [ABSTRACT FROM AUTHOR]

In recent years, the enormous losses caused by urban surface deformation have received more and more attention. Traditional geodetic techniques are point-based measurements, which have limitations in using traditional geodetic techniques to detect and monitor in areas where geological disasters occur. Therefore, we chose Interferometric Synthetic Aperture Radar (InSAR) technology to study the surface deformation in urban areas. In this research, we discovered the land subsidence phenomenon using InSAR and Global Navigation Satellite System (GNSS) technology. Two different kinds of time-series InSAR (TS-InSAR) methods: Small BAseline Subset (SBAS) and the Permanent Scatterer InSAR (PSI) process were executed on a dataset with 31 Sentinel-1A Synthetic Aperture Radar (SAR) images. We generated the surface deformation field of Shenzhen, China and Hong Kong Special Administrative Region (HKSAR). The time series of the 3d variation of the reference station network located in the HKSAR was generated at the same time. We compare the characteristics and advantages of PSI, SBAS, and GNSS in the study area. We mainly focus on the variety along the coastline area. From the results generated by SBAS and PSI techniques, we discovered the occurrence of significant subsidence phenomenon in the land reclamation area, especially in the metro construction area and the buildings with a shallow foundation located in the land reclamation area. [ABSTRACT FROM AUTHOR]