Search

Fungal laccase from Steccherinum ochraceum 1833 displays remarkable stability under different harsh conditions: organic/buffer mixtures, thermal treatment, and microwave radiation. The behavior is particularly significant in the light of the sharp inactivation observed for two different fungal laccases. Laccase from S. ochraceum 1833 also displays hyperactivation under mild thermal treatment (60 °C). Molecular dynamics simulations at 80 °C explained how this laccase retains the geometry of the electron transfer pathway, thereby assuring electron transfer through the copper ions and thus maintaining its catalytic activity at high temperature. Spectroscopic studies revealed that the thermal activation corresponds to specific conformational changes in the protein. The results indicate that this laccase is potentially applicable under denaturing conditions that might be beneficial for the biotransformation of recalcitrant substrates., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The lignin-degrading, biopulping white-rot fungus Physisporinus rivulosus secretes several laccases of distinct features such as thermostability, extremely low pH optima and thermal activation for oxidation of phenolic substrates. Here we describe the cloning, heterologous expression and structural and enzymatic characterisation of two previously undescribed P. rivulosus laccases. The laccase cDNAs were expressed in the methylotrophic yeast Pichia pastoris either with the native or with Saccharomyces cerevisiae α-factor signal peptide. The specific activity of rLac1 and rLac2 was 5 and 0.3 μkat/μg, respectively. However, mutation of the last amino acid in the rLac2 increased the specific laccase activity by over 50-fold. The recombinant rLac1 and rLac2 enzymes demonstrated low pH optima with both 2,6-dimethoxyphenol (2,6-DMP) and 2,2'-azino-bis(3-ethylbenzathiazoline-6-sulfonate). Both recombinant laccases showed moderate thermotolerance and thermal activation at +60 °C was detected with rLac1. By homology modelling, it was deduced that Lac1 and Lac2 enzymes demonstrate structural similarity with the Trametes versicolor and Trametes trogii laccase crystal structures. Comparison of the protein architecture at the reducing substrate-binding pocket near the T1-Cu site indicated the presence of five amino acid substitutions in the structural models of Lac1 and Lac2. These data add up to our previous reports on laccase production by P. rivulosus during biopulping and growth on Norway spruce. Heterologous expression of the novel Lac1 and Lac2 isoenzymes in P. pastoris enables the detailed study of their properties and the evaluation of their potential as oxidative biocatalysts for conversion of wood lignin, lignin-like compounds and soil-polluting xenobiotics.

The crystal structure of a blue laccase from Steccherinum ochraceum has been solved at 2.0Å of resolution using a classic data acquisition from a single crystal. The overall structural features are typical of this class of enzymes, however, distances inside the trinuclear copper cluster are indicative of a reduction of the metal centers induced by free electrons produced during the X-ray data collection. UV-visible spectra collected during the X-ray exposure support the progressive reduction of the metal centers. In order to better detect the reduction progression steps in the trinuclear copper site, a multicrystal data collection strategy based on a systematic spread of the X-ray dose over many crystals has been employed. This approach is based on collecting multicrystal data sets, then combining the slices of the individual data sets experiencing the same radiation dose to obtain composite complete data sets at progressively higher doses. Applying this technique, we have been able to capture sequential frames of the enzyme during the metal centers and molecular oxygen reduction mechanism obtaining a three-dimensional movie of the X-ray-driven catalytic conversion of the molecular oxygen in the active site of laccase: first, the copper ions reduction, then the molecular oxygen binding and its reductive splitting, thus allowing to reconstruct the entire catalytic cycle for multicopper oxidases., (Copyright © 2012 Elsevier Inc. All rights reserved.)

Background: Laccases belong to multicopper oxidases, a widespread class of enzymes implicated in many oxidative functions in pathogenesis, immunogenesis and morphogenesis of organisms and in the metabolic turnover of complex organic substances. They catalyze the coupling between the four one-electron oxidations of a broad range of substrates with the four-electron reduction of dioxygen to water. These catalytic processes are made possible by the contemporaneous presence of at least four copper ion sites, classified according to their spectroscopic properties: one type 1 (T1) site where the electrons from the reducing substrates are accepted, one type 2 (T2), and a coupled binuclear type 3 pair (T3) which are assembled in a T2/T3 trinuclear cluster where the electrons are transferred to perform the O2 reduction to H2O., Results: The structure of a laccase from the white-rot fungus Lentinus (Panus) tigrinus, a glycoenzyme involved in lignin biodegradation, was solved at 1.5 A. It reveals a asymmetric unit containing two laccase molecules (A and B). The progressive reduction of the copper ions centers obtained by the long-term exposure of the crystals to the high-intensity X-ray synchrotron beam radiation under aerobic conditions and high pH allowed us to detect two sequential intermediates in the molecular oxygen reduction pathway: the "peroxide" and the "native" intermediates, previously hypothesized through spectroscopic, kinetic and molecular mechanics studies. Specifically the electron-density maps revealed the presence of an end-on bridging, micro-eta 1:eta 1 peroxide ion between the two T3 coppers in molecule B, result of a two-electrons reduction, whereas in molecule A an oxo ion bridging the three coppers of the T2/T3 cluster (micro3-oxo bridge) together with an hydroxide ion externally bridging the two T3 copper ions, products of the four-electrons reduction of molecular oxygen, were best modelled., Conclusion: This is the first structure of a multicopper oxidase which allowed the detection of two intermediates in the molecular oxygen reduction and splitting. The observed features allow to positively substantiate an accurate mechanism of dioxygen reduction catalyzed by multicopper oxidases providing general insights into the reductive cleavage of the O-O bonds, a leading problem in many areas of biology.

The blue laccase from the white-rot basidiomycete fungus Panus tigrinus, an enzyme involved in lignin biodegradation, has been crystallized. P. tigrinus laccase crystals grew within one week at 296 K using the sitting-drop vapour-diffusion method in 22%(w/v) PEG 4000, 0.2 M CaCl2, 100 mM Tris-HCl pH 7.5. The crystals belong to the monoclinic space group P2(1), with unit-cell parameters a = 54.2, b = 111.6, c = 97.1, beta = 97.7 degrees , and contain 46% solvent. A complete native data set was collected to 1.4 A resolution at the copper edge. Molecular replacement using the Coprinus cinereus laccase structure (PDB code 1hfu) as a starting model was performed and initial electron-density maps revealed the presence of a full complement of copper ions. Model refinement is in progress. The P. tigrinus laccase structural model exhibits the highest resolution available to date and will assist in further elucidation of the catalytic mechanism and electron-transfer processes for this class of enzymes.

During the last decade the search for novel biotechnologically valuable laccases/oxidases with a high redox potential and concomitant activity under neutral-alkaline conditions is an attractive and at the same time complicated task due to their rare occurrence in nature. By means of the modified micromethod based on the chromogenic reaction with indicator substrates the successful identification of laccases/oxidases with different pH-optimum was carried out during submerged cultivation of 71 fungal strains of different taxonomic groups. Based on more sensitivity (detected laccase activity can be 4–6 time less as compared with the usual spectrophotometric assay of laccase activity), good productivity (measurements of numerous samples at once in small total volume – up to 150 μL), economy and rapidity, the presented modification of chromogenic reaction can be applied for identification of trace amount of laccase/oxidase activity in biological liquids, to determine the chemoselectivity of induced laccase/oxidase isoforms with respect to pH-value of medium, and to monitor the dynamics of expression of alkaliphilic and acidophilic laccases/oxidases during submerged cultivation of fungi. [ABSTRACT FROM AUTHOR]

Laccase mediator systems (LMS) were studied as catalysts for steroid oxidation. The fungal laccases from Lentinus strigosus 1566 and Trametes versicolor were used in the work. Among five mediators screened, 1-hydroxybenzotriasol (HBT) excelled in activity. The LMS effectively catalyzed oxidation of 3β-hydroxy-Δ 5 -steroids like DHEA (3β-hydroxyandrost-5-en-17-one) and pregnenolone (3β-hydroxypregn-5-en-20-one), while no activity was observed towards 3-oxo-4-ene-steroids (androstenedione, 9α-hydroxyandrostenedione, testosterone and 20-hydroxymethylpregn-4-en-3-one). The pathway of DHEA oxidation by LMS included the hydroxylation at positions 7α and 7β followed by oxidation of the corresponding 7(α/β)-alcohols to form 3β-hydroxyandrost-5-ene-7,17-dione. Regiospecific oxidation of allylic hydroxyl functions by LMS was confirmed using 3β,7α- and 3β,7β-dihydroxyandrost-5-en-17-ones as substrates. 3β-Hydroxypregn-5-ene-7,20-dione was produced with LMS as an only product from pregnenolone. The yield of crystalline product reached 58.3% yield with a purity of 96%. The results demonstrate that application of LMS may be a promising approach for steroid oxyfunctionalization. [ABSTRACT FROM AUTHOR]